VeroVex

Isn't showing up in device manager either, tried with another mobo and same result. Guess i'm getting a new gpu

@SlmoHayha i changed over to my 3200g, and have display when connected to my motherboard. Fans are not spinning on my gpu (rx580) but the blue power light is on. Still no display from gpu when booted into windows

Just tested PSU, all pins including GPU power are at correct voltage. I'll try my old 3200g cpu i guess.

After pressing the on button, my fans and activity lights all turn on, and stay on, but i get zero signal to my monitors. Reseated cpu, gpu, ram, ssd, all connectors on MOBO. No onboard graphics, i have a 2600x

No number display or post code lights on it for some reason, doesnt have a speaker either

Not freshly built, is about 3 years old. It was working fine yesterday. I believe it is not posting, as i get no signal from other monitors, and i know for a fact these monitors are working (tried them with a different pc) i have cleared the bios many times, reseated everything, tried entering safe mode, (power on/off 3 times), tried a different monitor from the 3 i knew were working (tried a 4th). I am lost. I get no motherboard splash screen, i can't enter bios. No signal to monitors whatsoever. No online troubleshooting, including the one pinned in this section, worked.

not really, sometimes it'll struggle to get past login screen, stopcodes are usually repeating there, but as of right now, and a couple other times, it's been good for a good 4 hrs. but out of the blue it will just give me a screen. usually different stopcode aswell

r3 3200g, xfx xxx ed 8gb rx 580, msi b450 tomohawk max, g.skill aegis 2x8 2666, thermaltake 500w, nzxt h510

Been having a large amount of blue screens after changing mobo out from a320mk to a b450 tomohawk max. diff stopcodes each time. what's my best option here? thanks.

Changed my motherboard out from a a320mk to a b450 tomohawk max, having a LARGE amount of issues. About 20 different blue screen errors, network errors, game freezing errors. Is my best bet just to reset my boot drive and reinstall windows fresh?

ended up just using some other partitioning software for windows, thanks though

When I right click on the partition, the menu only shows "help", whereas if i right click the data volume, it shows all of the normal options, so I cannot delete the partitions.

Okay, thanks, I will do that.

When I first built my PC, I had just used an old 1tb drive, and installed the OS on it. (disk 0) After a while, I got tired of the boot speed of the 1tb drive, so I installed an ssd (disk 2), and installed windows on it, without reformatting my original drive, so the os is still on it. I also have a secondary 1tb drive, (disk 1). Is it possible to delete all partitions on disk 0 other than the basic data partition, so that it acts the same as disk 1, and retain all of my files? The OS on disk 1 is not used anymore. Thanks.

Is something like this what you mean? I would need two of these, one at the house plugged into the modem, and another in the shop? does it act as a router? or would I have to connect it to one? I may sound like a moron here, sorry, i'm not experienced in networking.