Random Bee

Hi, I would just like to ask if you guys have had this issue / concern before? I have recently upgraded my Memory / RAM to 32GB from 16GB, but I have different models but same brand. 2x 8GB HyperX Fury and 2x 8GB HyperX Fury Beast, with all sticks running at 3200mhz and all are DDR4. Whenever I turn on my system from shut down / totally turned off state (with PSU turned off), it restarts 3x before it boots normally to Windows, sometimes it restarts up to 4x which will boot into Safe Mode then and forces me to boot into safe mode (by pressing F1) but the settings aren't reset to default and all I have to do is exit and then it boots normally. Should I be concerned about this? I mean, I know this isn't normal, but is this harmful to any of the components inside the system? Thank you in advance for those who will answer and share their insights!

Hello. I would like to ask the enthusiasts here or to the people that has intensive knowledge in undervolting / overclocking of Processors. I am currently using this settings attached, undervolting my processor, using Ryzen Master. But can I get more performance by trading off some temp? This is @4GHZ and max of 70 temp. I have a cheap CPU cooler, so I am willing to go to up to 80 at most? To get more performance and stable at that. Thank you.

I would like to ask anyone with the same model what's the best performance tuning for the graphics card on AMD Adrenalin? I'm looking for a performance gain but really doesn't make the card hotter at peak or idle. Thank you! I am currently using this settings attached.

Okay, man. I'll just wait for other commenters too to finally decide if I should or should not at least for the moment. Thank you by the way!

Unfortunately, yes. But it's the cheapest around me with a decent packaging. But will it be better than the stock thermal paste?

Unfortunately I still haven't got any funds to replace this as of the moment. But does changing my old thermal paste to this new one at least improve it in a couple of degree-celsius?

Good day to all. May I ask the thermal enthusiasts here? Is this Thermal Paste good enough? Or better at least than the stock thermal paste on my Ryzen 5 2600? I'm currently having 75°C max / full load on my CPU while using the stock cooler. I bought this thermal paste a while now, for just only $6. Is this good enough to replace my out-of-the-box pre-applied thermal paste on my Ryzen 5 2600? Thank you in advance to you all. God bless!

Should I overclock my Processor? It has a base clock of 3.3ghz and a boost of 3.7ghz. If yes, what's the best setting? Any help? My PC specs: Motherboard: Redfox h61h2m7 v2.0 Processor - i5-3550 GPU - RX 580 4GB Storage - 1x 240GB SSD for OS and other software, 2x HDD

Okay, Sir. Thanks! God bless!

I could control my system fan with it plugged in the system fan, so I swapped it with the CPU fan. The Hope that makes sense. So it is really the max? No other way around it? Thanks for the reply, BTW!

Yea. From its listed spec it has a max of 1.6k RPM. However, sometimes when I check the RPM via HWID it is at 1.7-1.8K RPM.

Good day! I would just like to ask the experts here, is there a way to manually tweak my CPU fan speed. I'm using a Deep Cool GAMMA ARCHER on my i5-3550. Any help with my current settings to hit at least 2,500 RPM? Thanks!

Okay, man. Thank you for your opinion. Thinking the same now.

Yea, might go for a 240GB. But that's the max I can do at the moment. Once I got some money, I'll go for a new build.

Thank you very much for that tip! God bless!

Sadly, even though NVME is more cost efficient thana a regular SSD, at my current setup and motherboard, It doesn't support that.

Oh. Sorry, I read that wrong. MB? As in Motherboard? I'm using Redfox H61H2M7 v2.0. Here's my system specs... Processor: i5-3550 @3.3GHZ Memory: 2x 4GB ADATA 1600mhz (8GB in total) GPU: Powercolor RX 580 4GB HDD: 1x 1TB WB Blue @7200RPM and 1x 500GB Seagate @7200RPM PSU: POWERREX 700W

Thank you for your honest opinion, man. Yea. Does that help my games run smoother / load faster even if it's on the HDD and only one partition?

I'm buying a Crucial BX500 120GB.

Yea. That's all I can afford. I'm buying a Crucial BX500 120GB SSD. It's about $20 here in the Philippines.

Good day, everyone! I know this is really late, especially at this age. But I'm buying an SSD now. I have 2 HDD, 1x 1TB WD Blue and 1x 500GB Seagate. I'm planning to buy a 120GB SSD. My question is, what's the bet config for this setup? and should I split my 1TB into 2 paritions still or leave it at 1?

UPDATE: Problem already solved. What I did: Done another clean reformatting of drives and re-partitioning, activated both AHCI mode on all Sata 3Gbps and 6Gbps ports, and installed all motherboard drivers but the raid driver.

This is the error I get, whenever I'm trying to install the RAID driver. This is the only issue I'm facing right now. Man... Even the old driver from the CD provided by the Motherboard's Manufacturer doesn't work.

Still not supported as the message says. Could it be the OS? IDK. I have the updated Windows 10.

Yea. Installed both of them.