Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

JESUS IS LORD

Member
  • Content Count

    140
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About JESUS IS LORD

  • Title
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. i am not sure ... if i could have put it where it was supposed to go i would have ... it was either have the gpu's vertically mounted or put the distro in the back... i couldn't do both cause i would not have a spot for the second rad!!!
  2. no the fittings were really good ... there were a few of the tubes that i had not 100% bend on to fit perfectly in the fitting and was pulling out with less force than the others so i super glued it and those tubes 2 of the 20 will not come back out ... but the system is leak free and the temps are really good
  3. they make a fully front distro for my case and when i ordered it i thought thats what i was getting, yet it was not...
  4. it is made for this case its just made to go where my back rad is... but since i didn't have space under my gpu's i put the rad in the back and on the top and temps are really good and the distro still looks sick and the fittings aren't leaking..
  5. RIG : MOBO : Msi Carbon Pro Gaming CPU : Ryzen 7 1700 @ 3.9ghz Ram : Currently 16gb of Geil Super Luce @ 3000mhz R.....G.......B ... had to RMA 16gb .. will have 32gb GPU : Gtx 1070 Founders Edition's Plural in SLI @ +220 on the Core and +520 on the memory on both cards NVME SSD : 2TB Saberenth Rocket, 250 gb Muchkin Drive ... NO HDD ALL NVME STORAGE!!! Rad : Dual 360 Rads Case : Lianli PC-011 Dynamic Distro Plate : Barrow for the Lianli PC-011 Dynamic RES AND PUMP are behind the mobo No Cable Management Required Put rgb strips behind 2 of the tubes, will buy more and do them all .. used superglue to attach ... they are 50/50 so the have a rubber outer coating! dont put super glue on RGB strips directly they will short and cause a fire!
  6. bad power plug ... plugged it in a different outlet and it was good to go .... had some tubes that did not want to stay in but i used a little super glue and then put it and now it is solid .. its not coming back out, but i do not think i will have need of taking it out
  7. FINISHED MY LOOP and my pc wont power on ... might of gotten water on something... motherboard probably, going to test it after work
  8. ON THE BRIGHT SIDE ... I am getting good temps with my PC in front of an A/C ... This just on idle but still for a loop with 2 GPU'S OVERCLOCKED 220 core clock and 520 on the memory both GTX 1070'S and CPU 3.9ghz. One Gpu is about 2 to 3 degrees hotter than the other which is not bad.. 2 x 360mm rads ... barrow cpu block with RGB!!! I managed to fix two fans that were damaged.. two of the wires got torn out some how .. they are good fans and the RGB still worked so I fixed them over the weekend with a staple and sauder
  9. So my board is just being weird !!! its works then it doesn't??? i currently have 2 sticks 16gb in at 3000mhz and cpu at 3.9ghz... i am waiting on fittings to come in and i have the tubing already... need fittings and 90, 45, and 180 degree bender tools i ordered ... i ordered everything from China to save money .... so it takes alot longer ... I waited about 3 months for four 90 fittings off ali express... Good thing about fittings is there is not alot there .. its basically orings that cause it to work or fail and as long as the orings are good it should be fine ... I look at how does it work and why and then determine what to buy .... my modded fittings that i made, soft tube to hard tube fittings, 10 are still in my system and leak free... the ones that leaked were missing an o-ring, because home depot ran out of them at the time .... I got BARROW BENDING TOOL https://www.ebay.com/itm/Od-16Mm-Barrow-Acrylic-Pmma-Petg-Hard-Pipe-Bending-Mould-Kit-For-Tube-Comp-O5M4/254590924174?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 16 mm Tubing from Thermaltake 1000 mm so they will be long enough for my bends https://www.ebay.com/itm/Thermaltake-V-Tubler-PETG-Tube-16mm-5-8-OD-1000mm-4-pack/124163833431?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 The proper silcone insert https://www.ebay.com/itm/Silicon-Insert-Thermaltake-OD-16mm-X-ID-12mm-For-ID-12mm-1-2-PETG-Hard-Tube/184297869509?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 These fittings in White ... Which He charged me less on because i originally wanted cheaper ones and He was out of them so I got 20 Fittings for $45 in stead of $60 ... I check and it would have been around $100 for 20 in USA https://www.ebay.com/itm/10-PCS-New-16MM-G1-4-coupling-fitting-OD-16MM-Rigid-tubing-water-cooling-Black/264783868553?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
  10. so here is the issue .. i for sure have one bad stick of ram ... so i will send that back .... when i go install two sticks it will not post ... three of my four posted in single channel one stick.... so process of elimination is : a bad cpu mount : which is what solved it before : a known "RYZEN" specific issue a bad ram slot on my motherboard either dimm 1 or dimm 3 : dual channel will not post Cpu related issue Going to start by getting two fresh sticks of ram, by RMAing the one that is bad, but they require me to send two sticks.. as of right now, I have one 8gb stick in single channel running at 3000mhz and my CPU at 3.9ghz I did the CPU with no ram overclock and then tested each stick one by one in dimm slot4 which is where it needs to be for single channel ... I checked the manual for which sticks go where for single and dual channel .... with no overclock , all four sticks will not run ... could not get 2 or 3 working either ...
  11. i got it for a good deal ... I just needed a board that supported 2 nvme drives and Sli. I am not doing serious 4.2ghz overclocking or anything ... Back to the point at hand .... I need to fix my PC ... If anyone knows how to solve the problem, please share ..
  12. fyi the Asus Rog Strix b450 : Bios Update failed , sold a 130$ board for $40 on craigslist and the guy fixed the bios and has a working board.. Then I bought the same board again .. Then realized I wanted to do SLI and that Strix b450 would not do SLI and so I got the Taichi x370 Which was a good board ... I do not remember why that one failed ?? but i was able to return it .. got it on ebay... Then I got the board which I have now which is my least favorite so far ... I liked the Strix b450 alot!!!! but it did not do SLI
  13. So it took 3.8ghz and 3000 mhz on the ram and then it sat for a day and would not hold it and would not post ... ANY overclocking on the Ram and the system will not post and windows is only giving me 15.9 out of 32gb Available... But on the bright side of things I did gain from 3.8 to 3.9ghz on the cpu and it is letting me overclock the cpu .... need to fix this ram issue ... I solved this prior by removing 1 stick of ram and it gave me 24 gb of ram but it let me OC to 3000mhz reseating the cpu I sent 2 of the 4 sticks for Replacement as i had one stick acting funny, by swapping them slot by slot as you mentioned, maybe i need to send the other two ...lifetime warranty on RAM LOLLLLLLL'S Bios is fully updated : Latest ... Which they had a more "GAMERY" bios and when you update it, it looks like a plain jane bios = fail , but it said in the comments of the bios better overclocking support .. that was a lie in my case
  14. I am at 3.9 ghz with temps in the 30's .... i have something going on that's not right with my either cpu or Ram....
  15. the cpu overclock is normal .. nothing to bad .. it was running 3.95 regularly.. recently ive only been running it at 3.8ghz ... I do not think the cpu is the issue
×