Luckyprock

Budget (including currency): $2500ish USD Country: USA Games, programs or workloads that it will be used for: Adobe premiere pro, photoshop, Rust, Tarkov etc. Other details (existing parts lists, whether any peripherals are needed, what you're upgrading from, when you're going to buy, what resolution and refresh rate you want to play at, etc): This is my current part list plan anyone have anything that strikes out to them as a bad combo or anything along those lines https://pcpartpicker.com/user/Luckyprock/saved/#view=CKHfdC Currently plant to play 1080p 144hz may ujpgrade to 1440p 144-240 depending on pricing.

it doesn't support 144hz through hdmi

Hi all, I'm looking for help from someone with a little more knowledge on video input and output Using windows 11 I have this laptop https://www.walmart.com/ip/Lenovo-IdeaPad-Gaming-Laptop-15-6-120Hz-FHD-IPS-AMD-Ryzen-7-4800H-8-Core-4-20-GHz-NVIDIA-GTX-1650-Ti-32GB-RAM-1TB-SSD-USB-C-Backlit-RJ-45-Ethernet-HD/880452120 as well as an acer 144hz monitor through DVI dual link. I just bought and found out that an hdmi 2.0 to dvi adapter will not support 144hz because dvi dual link is not supported. This laptop comes with the usb-c 3.2 gen 1 port that supports video transfer. Is there anyway to use this usb-c port and some adapter to be able to run dvi dual link so I am able to run 144hz at 1080p Thanks everyone for reading and helping

this worked thank you for your comment !

The drive is not showing up in BIOS and the connections seem to be good, the drive was working fine before I switched to my SSD

Hey, I'm on this forum since I recently bought an SSD and installed an older build of Windows 10 on it (1709) and since then my hard drive (D drive) isn't showing up in file explorer or disk management, I was wondering if this is because it still has a bootable version of windows and if so if there is a way for me to fix it and use my d drive while still booting from my ssd

Hey, I am trying to downgrade to Windows 10 1909 since I ran into an issue that looked like it was caused by my version of Windows, when I try to run the Windows installer I am unable to continue while keeping personal files and apps and I'm wondering if theres anyway to get around it or anything else

I cut the boot and tried putting it in as far as I could and theres still nothing

Purchased from newegg its a rosewill cable https://www.newegg.com/p/N82E16812119161?Item=N82E16812119161

If your talking about the little plastic tab to release it, yes, however it doesn't engage in this port

It seems to fit but it doesn't click in and it slips out without any force so I'm not totally sure where I went wrong

I was looking through the specifications of my motherboard since my Rosewill CAT 6 cable wouldn't fit and I couldn't find if they were compatible (https://www.newegg.com/p/N82E16812119161?Item=N82E16812119161) Motherboard LAN port: 1x Intel® I219-V (https://www.msi.com/Motherboard/Z390-A-PRO/Specification)

I've been looking for a solution on youtube and reddit to an audio issue I'm having and haven't yet found a fix so I was wondering if anyone had a solution, I have a set of steelseries arctis pros and in any game whenever sound occurs behind me there is no audio, even when I create the sound, for example on valorant if I were to knife a wall and turn away from it the audio completely goes away.

I've been looking for a solution on youtube and reddit to an audio issue I'm having and haven't yet found a fix so I was wondering if anyone had a solution, I have a set of steelseries arctis pros and in any game whenever sound occurs behind me there is no audio, even when I create the sound, for example on valorant if I were to knife a wall and turn away from it the audio completely goes away.

I can't find much about the topic so would I get stable internet if I used my powerline adapter with an xFi pod which is much closer to my room and I believe on the same circuit

Not the same breaker but it is on the same volt circuit

So I don't know where else to go with this tip since TP Link wasn't helpful so here I am, I have a tplink av600 powerline and I have the one plugged into my wall in my room and the other in the router. My ethernet set to full duplex 100mbps, no energy settings and I am getting at best 20 download and 10 upload, on the contrary in the same room over Wi-Fi I am getting 150mbps and 41 upload on a school chromebook with a nearby mesh extender I also have this router / modem https://www.xfinity.com/support/articles/broadband-gateways-userguides (3rd gen) This is the kit I have TP-LINK AV600 Nano Powerline Adapter Starter Kit, White, 2/Pack (TL-PA4010KIT)

My main system is a z390-a pro i7 9700 rtx 2060 nvme ssd 2tb hdd i just dont have it right now so im trying to make do with this and its so painful

If this doesn't come down at all should I assume its bad?

So I just reinstalled windows 10, complete factory reinstall and wiped everything from my drives, even after the issue is persisting so I assum it is hardware if anyone is able to help that would be great

I just have a couple questions since I bought an MSI z390-a Pro and phanteks P300 with a Cooler master hyper 212 evo black and I'm using the 9700 from my current prebuilt as well as the 2060, ssd and HDD and the ram Is this a decent wifi card https://www.amazon.com/dp/B082NZYDDM?tag=pcpapi-20&linkCode=ogi&th=1&psc=1 And did I make a mistake buying this PSU https://www.newegg.com/rosewill-glacier-series-glacier-600m-600w/p/N82E16817182340?Item=N82E16817182340&utm_medium=TraEmail&utm_source=TEMC-New-Order-Confirmation-USA&cm_mmc=TEMC-New-Order-Confirmation-USA-_-N82E16817182340

It has 16GB of ram and fresh windows installation

While idling my cpu is running at 50% utilization its a quad core i5 2400 paired with a gtx 1050 (2gb) and i only get a few frames is there a reason for this

Also what are some good fans that aren't totally expensive I'm looking for like 3 for around $30 at most

I already have the wifi card from my pre built and im wondering if it will work with that motherboard