Chanutte

I think I figured it out! I believe that my SSD was defective, so that failed to register in the boot menu. My HDD that I was using did not have windows installed, so that failed to boot as well. I also think that that my bootable USB did not boot because it didn’t detect an MBR disk that it could preform the setup on. The HDD that was from an old PC booted, which tells me it wasn’t a motherboard issue. The old HDD is slow as molasses because none of the drivers are up to date with the new system but I’ll be able to create an MBR partition on the drive I want to use and then use that until I can get a warranty replacement on the SSD.

Pulling out the CMOS battery didn’t work. My current theory is that the bootable drive won’t boot if there isn’t a suitable disk to write to. If my SSD is dead and the windows setup isn’t compatible with a GPT drive it would make sense why nothing will boot. I’m going to try to plug in a drive from an old PC and see if that works. Another thing that I noticed is that when choosing boot priority the SSD doesn’t appear. But it does appear if I go into the security menu or the advanced storage settings. If the SSD is defective that might explain that.

Hi, Can you go into a bit more detail about this? The windows setup configured my SSD, and to get the full 4 tb on my drive I converted it to a GPT partition. I still don’t know why an issue with any of my drives would prevent the PC from booting from a bootable USB. I’m also not able to find any setting in my bios for UEFI disk boot.

For future reference you can clear the CMOS\ by using a screwdriver or other metal tool to jump the CMOS pins for five seconds. You can find the pin layout in the motherboard manual.

Hello all and thanks for reading in advance. A few days ago I installed an NVME SSD in my computer, installed windows, and got everything working properly, This morning I tried to turn on my computer and got this error: “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key” Before I added my NVME SSD I was using a HDD that was working perfectly before today. When I saw this error I restarted and entered the boot menu. I tried to boot off the SSD again which did not work. I restarted and went into the BIOS do my settings, which seemed to be fine. I then swapped the m.2 slot for my SSD and tried again. After that, my SSD detected in the security page of my BIOS but not in the boot page. I then decided to try to boot from the Bootable SSD that I had used to install windows on my SSD when I was setting it up a few days ago. I got the same error message when I tried to boot from the USB. After a couple more attempts my PC didn’t detect any boot devices in the boot menu or the boot page of the BIOS. But they still detected in the security page. I then cleared the CMOS, which got everything to detect again but did not solve the problem. I also tried reseting the BIOS settings to default, which also had no effect. At this point I’m at a loss and I’m wondering if I need to RMA my motherboard. Any advice would be appreciated. Full system specs are below: CPU: Ryzen 7 2700x Mobo: ASrock X570 Pro4 Ram: Gskill 2x8GB DDR4-3000 GPU: ASUS Tuf Gaming RTX2060 SSD: Samsung 970 Evo 500GB HDD: Western Digital 4TB, Model WD4000FYYZ-05UL1B0 Power Supply: Corsair CX-650M OS: Windows 10 BIOS: 1.0? I cleared the CMOS and I don’t remember the factory version. Edit: Accidentally put Mobo specs instead of CPU