mayhem_modz

Nice beast but
Corsair 192GB (2x96GB) 5200Mhz DDR5
makes no sense for gaming, and it's slow 

HI guys e new project start...

Hello to all guys,
The case is already nice so how it is I will try to make it more aggressive and insert elements that recall the CTAC Praetorian helmet,
Obviously I'm talking about the wonderful TV series Altered Carbon
It starts with the study ...









All the white parts of the case will be repainted with opaque black and the others left in the original factory color.
To make it more aggressive and transport all the shi-fi elements I will create hand-worked acrylic elements
All enriched by various graphics created ad hoc and elements and fake carbon film in other parts.

I start from the base by dismantling it ..







As always, I take the measures directly from the case and bring them back to cardboard silhouettes and then on the acrylic and then cut them In this way I'm sure everything I fight ... or almost .....





My faithful self -constituted folding folding has been helping me for years in my projects ..

















These are delightful dice that must be inserted with a welder with a welder, those who have gone from my other mods know that it is so much, this allows the fixing of various overlapping panels, avoiding having to put a dice to the extreme that in most cases it would be Difficult, in this way you can screw everything from the outside ..











Useful things must be maintained, this case has the function of placing the muzzle in various heights by means of a screw, I try to keep it but I will cover the screws with another panel in order to cover them When you need to raise your muzzle, she lasts to dismantle it and regonarllo and then cover it again ...














 

here we go guys
installing leds on house panels..





the case, as you have already seen, is particular, it has the motherboard rotated by 90° and I found a solution for installing the tank radiator with the special EKWB support,
the tank is effectively positioned on the 360mm radiator by fixing it above the fans.













to stay on the theme, paint part of the fittings







to further resume the halo world theme, the EKWb personalized rings are additional rings available in various colors..









to test the finished system, use this tool which allows you to understand if there is a leak and intervene before introducing liquid



for now insert neutral liquid i will buy it later.



other led lights these are branded sharkoon as well as being adhesive they are magnetic!!





cablemod cables.







first start.



to color the liquid I use rgb ekwb allows you to create customized colors according to your needs..



inno3d ichill rtx 3070 video card already seen at the beginning of the worklog





https://www.inno3d.com/en/product_detai ... ed9e47392a





processing of the side panel in tempered glass



latest graphics application






internally applied vinyl



Halo finished first shots, soon better photos of course




 

here are other final votes with vertical video card ..                 final video enjoy!   [MEDIA=youtube]u0LGWbP0OAI[/MEDIA]

here are other final votes with vertical video card ..                 final video enjoy!   [MEDIA=youtube]u0LGWbP0OAI[/MEDIA]

Dang! Great work man!

hello guys rear cable collection support completed





preparation of the upper panel, I decided to make a variant even if the original panel will always be possible to use it I prefer to do something more themed and that it gives it a more massive aspect, all built a little bit at a time., very long work ... I also help myself with fiberglass and metallic putty.







































coat of primer to see and fill the imperfections again in the meantime that you dry with more. I make the bottom even more interesting by adding themed sidebars ..
















  hello guys rear cable collection support completed       preparation of the upper panel, I decided to make a variant even if the original panel will always be possible to use it I prefer to do something more themed and that it gives it a more massive aspect, all built a little bit at a time., very long work ... I also help myself with fiberglass and metallic putty.                                         coat of primer to see and fill the imperfections again in the meantime that you dry with more. I make the bottom even more interesting by adding themed sidebars ..                

Will you also include a full shop tour? And a total cost overview when done?

Hi guys, custom feet after having designed with accurate mIsUre mold on adhesive paper the shapes I cut them with the tunnel glue with glue for acrylic and fiberglass putty to consolidate and metallic putty to finish, all step by step, primer, grouting use of the sandpaper is to remove the hyperfections, again primer and finishing all this repeated until the pieces are perfect.




 





















  Hi guys, custom feet after having designed with accurate mIsUre mold on adhesive paper the shapes I cut them with the tunnel glue with glue for acrylic and fiberglass putty to consolidate and metallic putty to finish, all step by step, primer, grouting use of the sandpaper is to remove the hyperfections, again primer and finishing all this repeated until the pieces are perfect.                        

the heavy customization of this sharkoon rev300 case proceeds the idea is to give a really massive chest and lived in pure theme halo we hope to achieve this goal

panels that will complete the external led bulkhead.

panels made with manual dremel cut overlapping and staggered at 45 ° from each other to create the anchors and glued with metallic filler and worked ... really long job ..









after a careful painting of all parts of a military green RAL 6003 we reassemble the case and rivet ...









after a bit of initial confusion (the case turned 90 ° upside down so everything is very different) everything fits together .. now everything must seem a little clearer to you







obviously we are only at the beginning there will be other panels to add inside and out, the feet will be redone from scratch, in addition also the graphics and all the characteristic logos of HALO with a worn effect weave effect .. in short, this PC will seem to have been thrown out of the game and fallen on dodgy ....

Assembling motherboard, CPU, M2 and RAM. Better photo camming soon 🙂
 

This was a very fun project to follow. Thanks for showing it off, it's beautiful. All-aluminium builds like this are something else.

after a careful check of the cables and connected everything assembly of the outer panel.



pump assembly





the underlying part (the base) has a space of about 1.5 cm this will serve me to house all the excess cables and the LED controller.









next step video card assembly and custom loop ...

My lord this is just something out of this world.  Amazing attention to detail and vision.  Thanks so much for documenting it.