LewisJB

Can’t seem to find a way to do that within the Lian Li L-Connect software

Tbf this card has been pretty good with fan speeds

Will give the second option a go. I would prefer a curve but with how quick my cpu temps jump up even for a split second it just causes the fans to ramp up and down constantly

I’m currently looking at fan curves for all of my Lian Li SL-UNI fans in my O11 Dynamic. I have 3 on the bottom, 3 on the top (on the AIO rad) and 3 on the side. The bottom and side are intakes and the top is exhaust. Anyway I’m looking at optimal fan curves, I know it’s a bit personal preference just looking for some pointers. Just for reference I’m cooling a 5800x3D and a 4070. I’m currently getting to about 850RPM at my limit due to the constant temp spikes when browsing etc which cause the fans to ramp up and down constantly.

Hi, recently got a MSI RTX 3060ti ventus 3x and noticed that one of the fan controllers report the fans at 200rpm lower than the other fan, was just wondering if this was normal?

My 5600x seems to only reach a maximum of about 10400 multi core score in cinebench r23, even with PBO enabled. Temps dont go above 75c. My motherboard is an ASUS ROG strix b450-f.

Yep 1080 p low settings. I’ll get the link for the pc. https://www.currys.co.uk/GBUK/product-10219575-pdt.html

Hi, a friend of mine has a i7 10700 and a 3070. In warzone she averages between 85-110 fps. Is there any suggestions on what to try as people I know with very similar setups are hitting a steady 150+ regularly

Will look into it. Seems to only do it after 70% fan speed, so could be good

The card is a zotac amp extreme 2060 super. It only seems to make the sound at high speeds aswell, which I find odd.

I recently got a GPU in a swap deal and have noticed what seems to be a metallic sound coming from the middle ran hen above 80%. Could this be signs of early fan failure? I’ve attached a audio recording of it, you may need to turn your headphones up to hear it though. Metallic sound.m4a

I will definitely look into returning it then. Thinking about getting a router from Netduma, any experiences with them?

So, not sure if this belongs here or not but here we go. I’ve had a Netgear Nighthawk R8000 router for about a year and I’ve noticed that my speeds are constantly being throttled whenever I turn a device on. QOS and Netgear armour are both disabled, and I have made sure the Speedtest part of the router has higher speeds than I should get. I have noticed that when I turn my computer on in the morning, my speeds drop by about 100mbps, and to fix this I have to enable and disable the QOS feature (strange fix). Just wondering if anyone has an fixes for this? I am running the router on the latest firmware as of 16/02/2021

That’s very strange. I have a 240MM AIO on mine and regularly see temps up to 80c. I do have PBO set to auto though, so it does draw a little more power etc than compared with PBO off.

Hi, I have a question about my Red Devil 5700xt. I was wondering what sort of wattage I should be expecting the card to pull? As I only ever see the card peak at about 180 watts. I have a 650w PSU from adata, and a Ryzen 5 5600x, so I highly doubt there is a bottleneck.