Jump to content

T3DDY14

Member
 View Profile  See their activity

  • Posts

    47

  • Joined

  • Last visited

 Content Type 

Everything posted by T3DDY14

  1. T3DDY14
    300 isnt bad for that board, i paid between 200-500 for my ones, and did just see one go for £2k in germany
  2. T3DDY14
    Make sure it boots and has no issues, like pcie lanes not showing up or a cpu socket wont work
  3. T3DDY14
    Had a powercut and wont post anymore, gets stuck on code 2A or 2E with a constant beep
  4. T3DDY14
    Good luck, have had some issues with virtulization issues with an sr-2 before but never got it to work before the board died
  5. T3DDY14
    Well the issue still remains, I have sent it to a pc repair shop to see if they can find anything
  6. T3DDY14
    @TofuHaroto So i found a 960 and installed it and the dp ports worked fine , gonna try and reinstall the 1080ti now
  7. T3DDY14
    Okay thanks for the help gonna try this now, will report back if i find anything
  8. T3DDY14
    just gonna reinstall drivers one more time, as it sounds like a software issue
  9. T3DDY14
    i think i have one somewhere but dont know if its at my house or in storage
  10. T3DDY14
    ive googles a bit and noticed some people are saying i need to upate the uefi but not sure how i can do that when i have a legacy bios, i might take my pc to the repair shop sometime this week as ive got 2 sr-2 motherboards needing to be fixed/diagnosed
  11. T3DDY14
    i could try but i doubt that i could
  12. T3DDY14
    i sadly dont really have any modern systems the next newest is a sr-2 that is use currently
  13. T3DDY14
    Okay that did not work still wont boot with the displayport but it didnt flicker during the start up for the bios
  14. T3DDY14
    have not used it yet but will give it a shot just incase
  15. T3DDY14
    this is the cd i got with the monitors
  16. T3DDY14
    It boots normally if its only hdmi plugged in, and the other card i have just wont work in my system for some reason unless its in the last slot, i can give it a ago
  17. T3DDY14
    probably but its the only other thing i can think of, unless i got a cd with the monitors would that do anything?
  18. T3DDY14
    I just ddu the drivers, cmos clears everytime i turn my pc off so dont think that would work, i have a feeling its something in the bios
  19. T3DDY14
    it shows the start up information like ram,cpu speed and then checks marvell adapter and hard drives then it flickers to the other processes and then it turns off to no signal and then the pc wont get into windows
  20. T3DDY14
    Okay tried with new drivers nothing changed really really weird, as it flickers during bios screen now when dp is plugged in
  21. T3DDY14
    okay am using a dp-dp for 2 monitors will try to reinstall the latest drivers
  22. T3DDY14
    how would i go about setting it to legacy bios, the motherboard is an asus p6t deluxe v2 so i would assume it is a legacy bios
  23. T3DDY14
    windows is up to date
  24. T3DDY14
    i thought it would be a dead dp port but it works fine after windows has booted which leads me to believe that its a software issue, ive also seen some stuff about uefi but i cant really update my motherboards uefi as its last update was in 2011
  25. T3DDY14
    i used to use hdmi-vga, hdmi-hdmi, dp-vga, and dvi-vga ive just upgraded my 3 old monitors to newer ones
×