Robchil

You have an unidentified device for
Network adapter USB device. What is the pci id for these?
Try installing the lan/wifi driver for your board. Also try updating the amd chipset driver from amd site too.

Yes, it was a Driver-issue. I fixed it by reinstalling Windows

Quick update with the new PSU.
 
Everything works fine now. No cpu led is lightning when pc is off and it boots how it should😊.
 
Maybe with the new ram and so on the psu couldnt handle the extra rgb😅.
 
But problem is solved and thanks for helping❤️

well.. i wouldn't mix nvidia and amd gpu's.. that's why DDU was created to get everything out before running the other.  guess you found out the hard way. 
in intel igpu would work, or a secondary nvidia card. 
 

if you don't set the max to 253w by intel spec to the cpu you will need a full custom loop to cool it. 
 

try to follow this one?  
 
and this is the spec you need to follow. https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/processor-line-thermal-and-power-specifications/

Yeah yeah i can change the colours, all working fine.
 
Cables look all fine, no damage.. i orderrd a new psu today for testing if it solves the problem. Should arrive tomorrow.
Will let you know if it helped😅
 

Update, been up running a few days with nothing at all...
I guess it was some kind of corrupted driver or app that was running.
 
Interestingly I have NOT updated drivers from:
- asus mobo
- nvidia
- samsung NVME
 
Really, all i did was use barebone windows install and updating. 
 
Have also avoided some older apps that I worried would cause issues:
acrobat 2017
synology drive
 
Have to add back in synology drive, hopefully that isn't the issue...

Ended up doing this, all is well. Thanks for your help.

btw.. with steam ubisoft and other game loaders, you can backup the game data.. if you have space on your harddrive i would copy the game data there.. and restore it after a reinstall. 
 
and for drivers... i would use powershell and type Export-WindowsDriver -Online -Destination D:\Drivers  before you start this 😄
 
D:\drivers can be where every you want it.. to reload drivers quick.  go in device manager and just load drivers and point to the directory you choose.. 
 

Oh god manually changing partitions is a nightmare.
 
Make sure to make backup before you do this.

my system drive has one 499MB partition(recovery) a 100MB EFI partition ahead of C: and a 650MB recovery partition in the end of it. 
so you would need 600mb in front free space, and 650 mb at the end of the disk. 

Wonder if OP will keep trolling with the weird formatting.

🤔 in my recollection... win98 SE never realy supported ntfs... just fat32..  and mbr.. 
and yeah.. splitting large sizes was a known trick back in the day.. and a pain.. 

There's a lot of problems here. That CPU doesn't support that much RAM. That CPU is DDR4 only.
That motherboard isn't compatible with that CPU.

Cat5 can carry Gigabit, but there isn't as much room for error as there is with Cat5e.
 
I've seen residential installations where two of the pairs in a Cat5e run were not punched down to the jack. Instead, they were used for phone lines. (Gigabit Ethernet needs all four pairs to pass spec, but 100 meg Fast Ethernet only needs two.)
 
If all else fails, get yourself a long cable and run it along the baseboards. You might even be able to tuck it underneath the baseboard if you have carpeting.
 
 

Thats crazy considering the Keystones have the wiring codes on them... at least all the ones I've ever seen and used. 

yeah.. max file size is 4GB...  somewhere i read it's 2TB volume size... but that's actually mbr limit and why we use gpt.. 
 

🤔 in my recollection... win98 SE never realy supported ntfs... just fat32..  and mbr.. 
and yeah.. splitting large sizes was a known trick back in the day.. and a pain.. 

https://www.coolermaster.com/what-is-atx-3-1/
 
depends on what GPU you are going for realy... if your going AMD they use 6+2 8 pin connectors it wouldn't matter. if you want a 4090 i would go 3.1 to avoid the melting power connector problem. 

https://www.coolermaster.com/what-is-atx-3-1/
 
depends on what GPU you are going for realy... if your going AMD they use 6+2 8 pin connectors it wouldn't matter. if you want a 4090 i would go 3.1 to avoid the melting power connector problem. 

Nah I will make sure it has priority and it old one won't be in system till this is figured out.

yea, but putting two strips on it isn't that big of a problem 😄

Okay I think I don't have more questions : D Bye

1. it depends.. the difference is you can connect usually up to 10 fans, and get power directly from the PSU, it's still only 1 fan that will deliver pwm signal to a chassis fan port. 
2 you can, they will spin with different RPM tho, as it will deliver power on the RPM signal from on port 1 on the controller/hub, think it of giving power from 0 to 100%. 
one fan is running from 500 to 1900 rpm, another fan 140 will run slower like 300-1200 rpm ... other fans goes up to 3000rpm or more.. giving 50% power signal would make them run at 950, 600 and 1500 rpm respectivly. 
 
so it's more normal to get a splitter for 2-3 fans that are same model, or atleast same speeds. and another splitter for the 140mm fans as they will run slower, and put them on a different fan header.  if you go into the rabbit hole of fans... some comes with a controller and can connect 16 or more fans... still getting signal from 1 fan header. and as with mine.. draw power from 2 sata power connectors 😄
 
having more than 3 fans on a header will over time burn the header out ruining it.. depending on the ampere limit on the port, pump/aio headers delivers more.