redape2050

I have BCM43228 wifi card . i cheked these forums https://www.aircrack-ng.org/doku.php?id=b43 , http://linuxwireless.sipsolutions.net/en/users/Drivers/b43/#CA-cd292c2ceee979f3b581266868c524a1b2c2cb87_2 and found out my card support monitor mode the first one does't list my card cause if i run ski@lnx:~$ lspci -vnn | grep 14e4 05:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43228 802.11a/b/g/n [14e4:4359] adn the site did't listed 4359 but the second one did so i tried to enable monitore mode by root@lnx:/home/skril# ifconfig wlan0 down root@lnx:/home/skril# iwconfig wlan0 mode monitor root@lnx:/home/skril# ifconfig wlan0 up and it worked so i did the "injection test" in https://www.aircrack-ng.org/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/doku.php?id=injection_test and it gives me this output root@lnx:/home/ski# aireplay-ng -9 wlan0 ioctl(SIOCSIWMODE) failed: Device or resource busy 01:28:12 Trying broadcast probe requests... 01:28:12 Injection is working! 01:28:14 Found 2 APs 01:28:14 Trying directed probe requests... 01:28:14 28:16:7F:14:62:48 - channel: 1 - 'salsa' 01:28:15 Ping (min/avg/max): 3.593ms/26.249ms/33.023ms Power: -67.93 01:28:15 30/30: 100% 01:28:15 06:18:41:58:B7:8A - channel: 1 - 'mac' 01:28:16 Ping (min/avg/max): 7.332ms/21.906ms/54.839ms Power: -79.68 01:28:16 28/30: 93% but if i use airmon-ng start wlan0 command or any other tools to turn-on monitor mode my wifi goes out and switches to wired connection root@lnx:/home/skril# airmon-ng start wlan0 Found 2 processes that could cause trouble. Kill them using 'airmon-ng check kill' before putting the card in monitor mode, they will interfere by changing channels and sometimes putting the interface back in managed mode PID Name 625 NetworkManager 722 wpa_supplicant PHY Interface Driver Chipset phy0 wlan0 b43 Broadcom on bcma bus, information limited (mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]wlan0mon) (mac80211 station mode vif disabled for [phy0]wlan0) root@lnx:/home/skril# airmon-ng start wlan0 Found 2 processes that could cause trouble. Kill them using 'airmon-ng check kill' before putting the card in monitor mode, they will interfere by changing channels and sometimes putting the interface back in managed mode PID Name 625 NetworkManager 722 wpa_supplicant Requested device "wlan0" does not exist. Run /usr/sbin/airmon-ng without any arguments to see available interfaces as you can see if i ran the command again it just says wlan0 does not exist . beacuse of this i can't use any other tools like airgeddon,etc even if i turn-on monitor mode using the first method it just resets when i open airgeddon and wifi goes out the moment i start airgeddon

Hi guys pls help I bought an SSD and a CD caddy to upgrade my old laptop. how do I install Windows 10 on the SSD I don't wanna loose my genuine windows 10 i saw lot of YouTube videos installing Windows 10 using Windows Media creation tool but is there any way I am gonna loose the genuine windows pls help

Thanks guys ?. guys really appreciate it. I never got any good replys in any other community's some guys in others community's said it's clockspeed lol?

Pls help . I have a PC with 1600Mhz ddd3 ram. In thse photos what is the number in bottom right corner mean(1228 ,1334,1435)? I have an 1435 ddr3 ram! i'm looking to add some ram but I haven't find any ram that matches these numbers in my ram. is it mean stock clock speed? I looked into somany online article none of them mentioned it pls help me