nyichiban

went into microcenter looking for a ryzen 5000 restock today and walked out with a 3090 FTW3 Ultra so they are being restocked for all series. There were like 10 3080s before I got there according to the sales rep and they get random restocks. Newegg also had a few random restock throughout the week and a bunch was available on Friday 11/13

Thought I would update this. I updated the BIOS to what they have on their website which was v18 and RGB control was gone through Dragon Center. Then I was sent the latest beta BIOS v192 and still nothing but the Crucial x8 works just fine now! At least we know that it was a simple BIOS fix on their end to get this drive working!

Was looking for a power supply recently and came across this list. In case anyone wanted to get one as well this seems like a good price for a Tier S PSU: https://www.bhphotovideo.com/c/product/1009925-REG/antec_hcp1300platinum_hcp_1300_atx12v_eps12v_power_supply.html Only downside is that I can't seem to find a reasonably price custom cables for this. Until I find it I will still use my Seasonic Platinum 1000W PSU I guess.

Article from several days ago about treatment in Thailand with positive results. https://www.ecowatch.com/coronavirus-treatment-thailand-doctors-2645011844.html?rebelltitem=3#rebelltitem3 Not sure how accurate ecowatch site is but at least some form of hope for this epidemic to be controlled.

I would go for the front. The main thing is to have a cooler CPU and GPU can be slightly higher in temps. It's a tradeoff but see what is more important for you. In my case I wanted both so spent the extra money on the od11

I had a brief time with the lancool ii and you can put a 360 rad in the front. However I opted for the OD11 because of more fan placements.

Thanks mod, just don't like being personally attacked or misconstrued..

When did I offer up explanations for these speculations? You sir are confusing things.

So what does that mean then?

You should also read what I am writing. I never once said I believed those speculations. Just because I say there are people who believe in Jesus or Allah doesn't mean I believe them too. Don't make your own translations from what people are saying. That's just ignorance and you end up creating misinformation of what people are saying. I am not reading it. I am just stating there are many. Enough of this. Apparently you only want to see fault in others and interpret things to your own benefit. What I wanted to convey is that there are many differing things out there so it's important to get the all the facts.

Read my response. I said I was stating there are many speculations. Much like many theories or ideas. And for the 2nd time I am not reading into it. Please learn to read what people are writing instead of translating them into something else in your mind. You sir are being arrogant and ignorant.

@Canoeyou are seriously coming off as arrogant and all knowing about this issue and not even trying to see other people's point of view.

@Canoe what speculations am I reading into? I never said anything about speculations being fact. I am not reading into any speculations just stating there are many. SARS MERS and the latest 2019-nCOV are coronavirus strains but most people know them as SARS, MERS and now Coronavirus so that's what I stated. And as all viruses there is no cure but there is one fact that's for sure. The Flu has killed more people in one country than the other 3 versions of the corona viruses combined in one country. The flu, corona virus mutate over time. It happens and attacks our immune system differently. My point was that this is a new epidemic that is taking China by surprise and that something like this is nothing new as the flu has killed many more and infected many more that people also need to be aware of.

Yea it's a new epidemic for China and they are a vital country now for trade for the rest of the world since China is the world's factory now.

There is now 1,011 deaths but the flu is still 30 times that for deaths. I guess you are right, the flu is a bigger issue than this. There is too much speculations right now and too many differing stories about where it came from and the amount of people and deaths or it could be updates at different times. I guess this is getting much more media attention because it spread to many different countries and it's a new flu strain sars, mers now corona. This sin't the greatest killer in other countries but I guess this is an epidemic in China as they haven't faced something like this since SARS. Compared to 35,000,000 infected to right about 40,000+ there is a big difference.

As of 2 days ago 908 dead from the virus in China and 40,171 infected (https://www.nytimes.com/2020/02/09/world/asia/coronavirus-china.html). The flu in the US infects 2018-2019 estimates show 35 million+ and deaths at an estimated 34,157. That's just the US alone (https://www.cdc.gov/flu/about/burden/index.html). Wonder which is worse though. These are not numbers I pulled out of thin air. Just wondering why there is such a big thing over this when compared to the flu. Just saying.

New beta BIOS also reads the 128gb of memory! RGB everywhere now!

Well MSI sent me a beta BIOS to test out. The back panel USB C port is now working! Did a test and 1026R/944W which is better than not being able to be read but slower than my Razer laptop using the Thunderbolt 3 port. Now just gotta see if my 128gb kit of 4x32gb ram will post!

Well it doesn't work on either Gen1 or Gen2 USB 3.2 ports for my motherboard.

Funny thing is you need to use it in a USB 3.2 port to get the full speeds of the drive.

Tested it on my work system and it's fine. Read from the front panel (corsair 250D) no issues and this is an older board Asrock z370m-itx/ac. Wondering if it's my motherboard that hates it or maybe I need to install some drivers but couldn't find any on the msi site for USB drivers for that particular board.

Nope doesn't work with the adapter either.

The problem is I got a new Crucial X8 and my desktop won't read it. It works fine in my razer laptop but not on my desktop. Granted the laptop has Thunderbolt 3 but still. My PC specs are: Case: Lian Li O11 Dynamic XL Mobo: MSI X570 MEG ACE CPU: 3950X Ram: 64gb G.Skill (4x16GB) OS: Win 10 1909 GPU: Aorus 1080ti Xtreme HDD: 4TB RED, 4TB HGST NAS SSD: 2TB Micron SSD, 1TB Corsair MP600, 2tb Corsair MP 600 So for whatever reason it failes to work on the USB C Port and thought it was my ports but my samsung T5 drives read just fine. Mobo USB settings are XHCI disabled and USB Legacy on auto. Any ideas? TIA!!!

In that case I think the noctua IPPC one would be good. You could go cheaper but these are quality fans. They go up to 3000RPM but at those speeds you are looking at a loud fan. They have PWN so you can adjust the speeds to your fit.

Look at the coolermaster jetflo. It comes with several cables to change speed of the fans if you r system can't do adjustments.