Azreil

Yea, The Mobo display ports are off in bios with no way to enable. They are CPU bound. Also the other cables I have are also bad, so need to buy more cables to test. As for the other display ports, I have already tested them without restarted the system (since that fixes the issue on it own). I dont have any other moniters except one with a DVI. Its from my older PC build. The drivers might be the issue, but at the same time My friends PC has Nvidia and also getting no signal and even distorted sound. So I dont really want to switch cards. since she was using my old card. My Brother is using AMD and I can ask him when he gets up which driver he is using. No issues like this at least on his PC.

I believe the issue might be your ram settings. I have purchased low spec ram in the past and overclocked to higher speeds. The symptoms you describe are the same I got. The 3 resets when setting the ram is the Bios not able to stabilize the ram. Once the ram is stabilized it will save the settings and then run after that. but if for any reason the ram becomes unstable when you start up it turns off again. There is a chance that you might need to adjust the timing on cas latency as well or set to an even lower frequency altogether. If 3000mhz works without the 3 resets, then setting it to 2800 or 2900 should prevent any further restarts when booting in the future.

Windows 10 home 64bit 1909 Mobo: Asrock X570 Taichi Bios: 2.70 CPU: Ryzen 3800X Ram: CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 3200Mhz (Cas 16,18,18,36,54) GPU: Asrock Radeon 5700XT Taichi OC+ Storage: Samsung 970 Pro NVME 512Gb (Boot), Samsung 860 QVO 2Tb (Games), Sandisk Ultra II 480Gb (Media) Power Supply: Corsair RM750i Peripherals:Corsair K95P Keyboard, CORSAIR Scimitar PRO mouse, Corsair Void Elite headset, Fractal Design C36 AIO. Moniter: Acer Nitro Gaming VG271U Pbmiipx 27" I am using a display port for connection. I bought the monitor a year ago. the cable is only 3 months old. Had the GPU for 4 months. I have been having "spotted" outages. (ex: while playing games or videos, the display seems to lose several pixels. usually in areas like a tear or streaks. possibly even a full black screen.) They happen just fast enough for my eyes to notice, but not really get a clear picture of what happened. Today I had lost signal completely. Resetting the Monitor had no results, unplugging and replugging the cable didnt fix it either. When removing the cable from the GPU while attached the monitor it said no cable. When I do a PC restart without touching anything inside. The display works again and My PC had no errors reported. Even with a hard reset it doesnt boot into repair either. The issue happens when not under load as well as when being used. but never just sitting at desktop with only backround processes running. Below is the DxDiag taken right after startup after failure. When gaming CPU temps: 40-50c, CPU usage:10-30% (depends if Im running the server), GPU temps: 65-78c (fans always 100%) When idle or netflix etc, CPU temps: 30c usage: 5-10%, Gpu Temps:25c The average temp of all other sensors is 27-32c except chipset, that is 50-58c. DxDiag.txt

Windows 10 home 64bit 1903 Mobo: Asrock B350 Gaming k4 Bios: B5.80 CPU: Ryzen 1500X Ram: CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 3200Mhz (running at 2400, Cas 16,18,18,36,54) GPU: Asrock Radeon 5700XT Taichi OC+ (Previous: EVGA 980 SC ACX 2.0) Storage: Samsung 970 Pro NVME 512Gb (Boot), Samsung 860 QVO 2Tb (Games), Sandisk Ultra II 480Gb (Media) Power Supply: Corsair RM750i Peripherals:Corsair K95P Keyboard, CORSAIR Scimitar PRO mouse, Corsair Void Pro headset, Fractal Design C36 AIO. Moniter: Acer Nitro Gaming VG271U Pbmiipx 27" As the tittle says, At random times my PC "freezes". But its not a normal freeze. The LEDs in the case are frozen and on, the Mobo LEDs stay on, Ram LEDs, even the GPU LEDs. But the hardware not inside the case is off. Keyboard, Mouse, Monitor, headset, etc. All the lights go off, monitor says no signal. It happens mostly when playing games, but it has happened using Chrome to watch videos once. I have already monitored Temps and all are within normal ranges during "freeze". I have swapped GPUs since I needed a new one anyway, but thought it might be that. Memtest64 says ram is fine after 10 passes, and 1 hour load. When I use the reset button on case it does work and PC starts up normal, doesnt ask about system repair. Im at a lose and need some help.