Spidey_Mason

So my issue was resolved with an update to the GPU's ROM. They had a release specifically for the LED issue. In reality there was no issue, just a fault with the coding. Navigate to the downloads page of your specific GPU and it should be listed! Thanks for all the ideas and help here everyone!

Hello! I have a Corsair H100i RGB Platinum cooling a Ryzen 7 2700x in a NZXT H510i currently in a pull config. I want to add another set of ML120 fans to the front of the rad to do a push pull config to increase the air flow into the case. I would like to have them controlled at the same time by the icue software but do not want to add a commander pro to control the additional fans. What I'm thinking of doing is to get 2 y-adapters for the fan power and split off the power leads from the h100i pump. Would 2 additional fans exceed the power output on the h100i or should I be okay power draw wise?

So I found out that gigabyte had an update for this. It was buried way in the depths of their support page for the RTX 2060 Super page.

Hello all! I recently built a new rig for myself (finally) and I've come across an issue that I've never had before. The white power LED above the PCIe power connector is illuminated. Its a solid white light. I haven't been able to find anything within the UG as to why this would be. It seems to be powered up fine so I don't believe there is an issue with power. Is this just a normal status indicator?? I've updated all the drivers and have reconnected the PCIe power cable multiple times both at the PSU and the card and tried different cables from the PSU. Thanks for the help! My system: AMD Ryzen 7 2700x Gigabyte Aorus Pro Wifi x570 Gigabyte RTX 2060 Super Gaming OC 8gb Corsair Vengeance Pro RGB 30GB Intel 6 series NVME SSD 1TB Seagate Firecuda 2TB SSHD Seasonic Focus 750 Watt Corsair H100i AIO Corsair LL120 x3 Corsair Commander Pro Corsair K70 MK2 Rapid Fire Corsair M65 Elite NZXT H510i Windows 10 Home.