Jump to content

DennyP19

Member
  • Posts

    6
  • Joined

  • Last visited

Awards

This user doesn't have any awards

DennyP19's Achievements

  1. At the moment the PC won't post at all, it's not working with friend's ram single/dual and neither with my (perfectly working for sure) ones so I don't think it's the ram after all. The thing that's exploding my brain is that the PC worked for like 2 hours no problem with multiple reboots and then without doing anything I'm back to square one with CPU debug led and no post...
  2. Hi guys, I built a pc for a friend with the following specs: i9 9900KF NZXT Kraken x62 MSI Z390 Gaming PRO Carbon 8x2GB DDR4 @ 3600mhz EVGA 2080FTW3 EVGA SUPERNOVA G2 750W Everything lights up/spin but the pc won't post and I get the EZ Debug cpu led on. I tried to boot with a single ram stick and it booted up no problem with a single ram stick, I updated the BIOS and tried again the dual channel setup and again no post. Went back to a single ram stick and...no post .__. I tried to plug in my personal ram (DDR4 8x2GB @ 2666mhz) and I got to the bios no problem both with a single stick and dual channel. At this point I was pretty sure it was a RAM problem, I gave the new ones another try and the PC booted up no problem (???) in dual channel too. Tried a few restarts and it was ok, so I went ahead with the Windows installation, it was done smoothly and I used the pc for like an hour before turning it off. I turned it on again after a bit and, again, no post and EZ Debug CPU led on. I have litteraly no idea of what's going on and I need help ? additional troubleshooting I tried: -Cleared CMOS multiple times -Removed the CPU, checked for bent pin (everything was perfect) and resocketed it -Verified the PSU cable connection Thanks.
  3. After quite a bit of testing it looks like it is not a GPU problem but possibly a CPU/RAM/Mobo/I have no idea problem, I'll open a new post because the actual problem has nothing to do with this title, thanks for helping
  4. it is actually the SuperNOVA GS 650W, no idea why I wrote G3 here, it should be fine still? The cables looks the same to me apart from the braided cover on the G2 ones.
  5. Thanks, I will try, can I just swap around the PSU itself and connect it to the already setted up cables?
  6. Hi guys, I built a PC for a friend, the specs are: i9 9900KF MSI Z390 Gaming pro carbon 16GB DDR4 @ 3600mhz EVGA 2080FTW3 EVGA SUPERNOVA G2 750W I built the thing and when I turn it on everything lights up/spin correctly except the GPU, the frontal led doesn't even light up, and I get one red debug led above the power connectors and of course I get no video signal, tried HDMI and DP, the card is connected to the power supply with two 6+2 pcie connectors coming from separate ports on the supply, I already tried different ports and cables, I even tried the other pcie slot on the board with no luck. I was pretty sure the card was dead out of the box or something but I tried to plug it on my rig (i5 6600k / MSI z170A / 16gb DDR4 @ 2400mhz / Supernova G3 650W) and it works perfectly, frontal led turning on, no debug led and ofc I get video signal just fine. I am out of ideas and in need of help! Thanks.
×