Jump to content

werto165

Member
  • Posts

    5,696
  • Joined

  • Last visited

Everything posted by werto165

  1. werto165

    I've updated to a ryzen 3600 and i've encourter…

    I think I've narrowed it down to my network card...... I replaced PSU's that wasn't the issue the only thing left was my network card. How odd!
  2. werto165

    I've updated to a ryzen 3600 and i've encourter…

    I'll have a look at that thnaks. I've tried so many things now I'm trying to make sure it's not my ram.
  3. I've updated to a ryzen 3600 and i've encourtered nothing but problems since. I keep getting BSoDs, I've reinstalled windows a couple of times. The specific error I keep getting is to do with kernel secruity check failure. Has anyone had issues with this in the past? I feel like it might be to do with my PSU, it was making some coil whine which it didn't before any ideas?

    1.   Show previous replies  3 more
    2. vanished

      vanished

      Odd indeed.  They are often a culprit for driver issues but I've not heard of a situation like you described before

    3. werto165

      werto165

      well I guess it could be a driver issue with the network card? I'm tempted to just throw it away considering it's taken about 4 hrs out of my evening to troubleshoot. 

    4. vanished

      vanished

      I suppose it's possible, but the fact this issue started when you swapped CPUs suggests to me that might not be it.  If it worked before, it should still work now, seeing as nothing relevant to it has changed, and by default we'd expect any change that did occur to be directly related to problems that appear at the same time.

  4. werto165

    Guys with car knowledge I need you. I have an o…

    No lol. It's a shit bucket. It just stresses me out that it has the MIL on.
  5. Guys with car knowledge I need you. I have an odb2 can shield that I can write pids to and I'm looking for a p0301 and p0303 error codes because my ignition coil failed. So I'm just wondering if I clear the dtc if any issues that are present would show/trigger again?

    1.   Show previous replies  1 more
    2. werto165

      werto165

      No lol. It's a shit bucket. It just stresses me out that it has the MIL on. 

    3. lewdicrous

      lewdicrous

      From my limited understanding, if you clear the codes without fixing the problem, then it'll come back sooner or later. (When the car detects it again, when you scan for codes, etc)

    4. lufihengr

      lufihengr

      If the underlying issue persists, the light will come back on at some point.

      Sometimes when I have got an error for a fuel lean or rich condition, it won't come back. It has been likely due to bad fuel or something

  6. werto165

    And Ryzen 3 3600 (6core 12thread) 16gb Ram cors…

    True, don't really know the value lost from being preowned, apparently it was built in july of this year and it's only been used a few times...
  7. werto165

    And Ryzen 3 3600 (6core 12thread) 16gb Ram cors…

    preowned still a good deal?
  8. And Ryzen 3 3600 (6core 12thread) 16gb Ram  corsair @ 3200 Gigabyte auros motherboard is this for £260 a good deal? 

    1.   Show previous replies  1 more
    2. werto165

      werto165

      preowned still a good deal? 

    3. SnowyMus

      SnowyMus

      It seems to me that's a bit cheaper than buying it brand new, and it's not like you're going to lose any performance just because someone else used the parts before you did, so long as they work.

    4. werto165

      werto165

      True, don't really know the value lost from being preowned, apparently it was built in july of this year and it's only been used a few times... 

  9. If you wear glasses with the HTC vive (or whatever the lastest version is now) assuming that your glasses correct your vision I don't think it would affect your VR at all. I'm not too sure on whether you can use glasses easily with the rift S. I have the rift and I remember it not being easy for glasses wearers to use the rift.
  10. Yeah the GPU is the only wrong thing I honestly don't really use it all that much. I used to use it for CAD and unity. I was interested in using NVMe as the price seems to have gone down considerably. When I first got my SSD I think I paid something like £200 for my SSD ? and now you can get a pretty good SSD probably 1tb for that price now... Where would you see the greastest benefit of an NVMe SSD? I was playing around with blender quite a lot doing a few renders but I might get back into that when I have the time so possible use case with blender too
  11. It doesn't do too bad in the outer worlds at 1440p get about 50fps but I guess that is with it being on low. Which way would you recommend going? Seems like AMD are pretty good nowadays its been a while since I've been fully into PC's. 3600 would be a pretty solid upgrade, what GPU would you recommend to go along with that?
  12. Sorry of me It was just that I did on my first post
  13. input1 = input("Please enter var1") input2 = input("Please enter var2") if(input1 == input2): print("hello world") else: print("goodbye world") ...
  14. So basically I have a bit of money after starting my first proper job and I'm wanting to know what you think the best upgrade path for me would be? I was thinking an upgraded GPU but I fear that I might be limited by what my CPU can deliver with it being so old now. Do you think it would be worth doing an upgrade of GPU or is 970 and above the start of a bottleneck for a 3570? I would be looking to spend about £500 to do upgrades ( I have a 970 now my pc specs in my banner are quite outdated on that front)
  15. that's checking if example is True. so a boolean operation. You are only comparing one thing there; boolean check to see if it is True, you need another variable to check it against.
  16. if(bool): run command else: different command ? or if(bool1 and bool2): run command else: different command ? input1 =True input2 =False if(input1 and input2): print("hello world") else: print("goodbye world") OR: input1 = input("Please enter var1") input2 = input("Please enter var2") if(input1 == input2): print("hello world") else: print("goodbye world")
  17. I've had to replace my anet a8 after two years of usage, just couldn't figure out what was wrong bought a new e3d v6 for it too, I think my bed just warped and my mechanics were fucked after two years of usage. I've recently bought the ender 3 and it's a solid machine. just make sure you mess with the eccentric nuts otherwise the bed will have a lot of play.
  18. werto165

    Starting a new job on monday as a software engi…

    good luck with that
  19. werto165

    Starting a new job on monday as a software engi…

    You got a job now @Castdeath97?
  20. werto165

    Starting a new job on monday as a software engi…

    It's not sadly it's in preston close to where I live about a 35 min drive.
  21. Ender 3 is apparently a good one. I have an anet a8 but I would not recommend that at all hahaaaaaaaaaa
  22. Starting a new job on monday as a software engineer eeee I'm excited :D

    1.   Show previous replies  4 more
    2. werto165

      werto165

      You got a job now @Castdeath97

    3. Castdeath97

      Castdeath97

      @werto165 Still doing masters, should be done in a week or so, and then I have an interview back home for a software engineering position, but I'm really not sure about the job market at home. 

    4. werto165

      werto165

      good luck with that :)

  23. What do you need to calculate the bandwidth of a signal? I'm just looking at the USB4 spec and it can do 40Gbps. So max is resolution*framerate*colour depth(in bits)? is that right

  24. it might be quite hard with all the flex connectors that phone cameras usually have. I think you could use an old android phone for a webcam through an app but I don't think that's what you wanted to do is it?
×