Jump to content

Tony Dao

Member
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Tony Dao

  1. Can I just hammer a nail into the wall and wired it to a screw that connected my PSU/Case? To be honest i don't know anything about this whole grounding business. And my main concern is that can this light shocking cause any problem to my hardware?
  2. Hi, So I've just finish my first build and when i touched the case even when turn off i get some light electric shock. Through research i find out that our home and socket doesn't have proper grounding (the same as 99,9% household in this country) and i I really want to know is there any damage i can do to the hardware by not grounding my PSU and case? Someone told me that i just need to wear extra thick slippers to prevent shocking and that's it.
  3. Okay so today I finally be able to test the board with different set of RAM borrow from a friend and it still doesnt boot, while the ram i have install on his computer still work fine so i guess the problem might come from the motherboard, I'll bring it to the MSI center tmr for the final verdict. But I still don't know what can cause this, I install everything right and don't do any damage to the board. Can it be electric discharge from the case itself because I think I get shocked once when touching the case
  4. Hi, so i try to clear cmos, even remove the battery but still no signal and dram led is still red. Could it be there is a problem with the mobo? Can anyone tell me what debug dram normally indicated?
  5. I'm pretty new to pc building, can you show me how to do CMOs Clearing? Is the CMOs button the same as bios flash button?
  6. I try it but still no signal, i even try 1 ram stick in each dim slot but still dram led red. I have update the bios, check cpu, check vga but still cant find the problem
  7. Hi, so i just finish my first build 2 days ago and everything work fine. But today when i test my new build with Battlefield 1 the display just turn black. I try to reset the computer but it get to password for 10 sec and then off again. I try everything but now it just doesnt boot anymore, and the debug led for dram stay solid red. Can anybody help this noob out, thanks alot. *My spec: -CPU: AMD Ryzen 5 3600 -Mobo: B450 Tomahawk Max -Ram: XPG D41 Bus 3000 -VGA: Gigabyte Vega 56 -PSU: Sesonic EVO 620w
  8. Hi, so i just finish my first build 2 days ago and everything work fine. But today when i test my new build with Battlefield 1 the display just turn black. I try to reset the computer but it get to password for 10 sec and then off again. I try everything but now it just doesnt boot anymore, and the debug led for dram stay solid red. Can anybody help this noob out, thanks alot. *My spec: -CPU: AMD Ryzen 5 3600 -Mobo: B450 Tomahawk Max -Ram: XPG D41 Bus 3000 -VGA: Gigabyte Vega 56 -PSU: Sesonic EVO 620w
×