Nagi

Hi, thank you for the help! Unfortunately that didn't work, when I touched the multiplier, the pc stopped booting and I had to reset the bios by cleaning the cmos. I also tried to turn on the voltage to 1.35 and the multiplier to 36. I got the same result.

Hello, I just bought a new Pc. Here are the specs: Mobo: Gigabyte B550 Aorus Elite CPU: AMD Ryzen 3600 Ram: G.Skill Ripjaws V x2 8GB DDR4-3600 I tried to activate the XMP profile but its not doing anything. On windows the ram speed is stuck at 2133. I updated the Bios to the latest version. I also tried to manually put the voltage of the ram at 1.35V but nothing is working. Is there something else I can try? Thank you for the help.

Hello, I have a Lenovo Yoga 730. Its pretty fast but sometimes it gets really hot and loud for no reason. The fans ramp up randomly even tho I only have a few tabs of Firefox open. The biggest problem shows up when I just use the Battery. The laptop while unplugged is really slow, it takes a few seconds uo even open a folder. I usually keep the battery on "Better Battery" mode or "Best performance", never on power saver. Here are the specs: Intel Core i7-8565U 16GB Ram M.2 SSD NNMe 500GB Crucial P1 Windows 10 Home I already changed the thermal paste and formatted the pc a few times. Even if I dont install anything and let the pc update via Windows 10, I still have these issues. The bios and the intel igpu are also updated. Thanks for the help!

Hello, I have a question. I already have 2 4TB drives in mirror, can I add another 4TB for data? And I also have one single 1TB Drive, can I add another one to mirror it without deleting everything? Thanks for the help!

Hello, I want to get new Harddrives for my FreeNAS machine. I found these two offers from the store that I'm planning to buy from: https://www.digitec.ch/en/s1/product/seagate-ironwolf-2x-4tb-set-8tb-35-hard-drives-11729713?supplier=406802 https://www.digitec.ch/en/s1/product/wd-red-2x-4tb-set-256cache-8tb-35-hard-drives-12535213?tagIds=76-535 The price is almost the same, so I'm unsure what to pick. I want to get some drives that I can use for as long as possible. I use the NAS to backup files and for my Plex. Thanks for the help!

Hi everyone, I bought an Asus RP-AC68U, I'm setting everything up but I have a small problem, I don't know which one is the WAN Port. I looked in the documentation but nothing. The Repeater's specs page shows that the device has only 5 Gigabit port. But during the set up I get the option to connect the repeater with a cable. Doesn't say witch one is the right port.

Hello, I have a question, how do I select my SSD as transcoder folder on freenas? My Plex plugin and jails are installed on a ssd on my freenas. I dont know how to select it as my Transcoder temporary directory. Should I write /mnt/ssd/cache or /ssd/cache ? Thank you!

Hello, I got a Razer Blade 13", i7 8565u and a nVidia MX150, while playing games I noticed that the nvidia graphics cards is not fully working. Its kind of working together with the igpu, why is that? I tried some games, like league of legends and I still get same same results, bad frame rate and only half of the usage. I tried to change the nVidia Control Panel from "Preferred graphics processor: auto-select" to "High-performance nvidia processor" but still nothing. I already update the nvidia drivers and put the pc to best performance. Thanks for the help.

Hello, I build a NAS a few weeks ago, so Im still new. I got a weird Error yesterday:CRITICALPool Storage state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected..I don't really know what's wrong with it, I did a s.m.a.r.t. test on the drives just to see if some of them are broken but I'm not sure what to look for..This is my setup:i5-6500, 8GB RAM DDR4, 3x1TB WD Purple HHD and a M.2 240GB SSD as a cache.This is what I got from the shell:Thanks a lot for the help root@NAGINAS[~]# smartctl -a /dev/ada0smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Device Model: WDC WD10PURZ-85U8XY0Serial Number: WD-WCC4J5RNXDC3LU WWN Device Id: 5 0014ee 2b973ca8aFirmware Version: 01.01A01User Capacity: 1,000,204,886,016 bytes [1.00 TB]Sector Sizes: 512 bytes logical, 4096 bytes physicalRotation Rate: 5400 rpmDevice is: Not in smartctl database [for details use: -P showall]ATA Version is: ACS-2 (minor revision not indicated)SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Thu Mar 12 19:18:10 2020 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x00) Offline data collection activitywas never started.Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completedwithout error or no self-test has everbeen run.Total time to complete Offlinedata collection: (14100) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate.Auto Offline data collection on/off support.Suspend Offline collection upon newcommand.Offline surface scan supported.Self-test supported.Conveyance Self-test supported.Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before enteringpower-saving mode.Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported.General Purpose Logging supported.Short self-test routinerecommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 160) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SCT capabilities: (0x303d) SCT Status supported.SCT Error Recovery Control supported.SCT Feature Control supported.SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 03 Spin_Up_Time 0x0027 149 127 021 Pre-fail Always - 35414 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2635 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 07 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 09 Power_On_Hours 0x0032 095 095 000 Old_age Always - 407910 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 011 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 012 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 158192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 78193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 185194 Temperature_Celsius 0x0022 106 100 000 Old_age Always - 37196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Extended offline Completed without error 00% 4061 -# 2 Short offline Completed without error 00% 4058 -# 3 Short offline Completed without error 00% 4058 -# 4 Short offline Completed without error 00% 4058 -# 5 Short offline Completed without error 00% 4058 -# 6 Short offline Completed without error 00% 3567 -SMART Selective self-test log data structure revision number 1SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS1 0 0 Not_testing2 0 0 Not_testing3 0 0 Not_testing4 0 0 Not_testing5 0 0 Not_testingSelective self-test flags (0x0):After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.root@NAGINAS[~]# smartctl -a /dev/ada1smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Device Model: WDC WD10PURZ-85U8XY0Serial Number: WD-WCC4J6NXS2TDLU WWN Device Id: 5 0014ee 2b9cc7fdbFirmware Version: 01.01A01User Capacity: 1,000,204,886,016 bytes [1.00 TB]Sector Sizes: 512 bytes logical, 4096 bytes physicalRotation Rate: 5400 rpmDevice is: Not in smartctl database [for details use: -P showall]ATA Version is: ACS-2 (minor revision not indicated)SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Thu Mar 12 19:18:51 2020 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x00) Offline data collection activitywas never started.Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completedwithout error or no self-test has everbeen run.Total time to complete Offlinedata collection: (12840) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate.Auto Offline data collection on/off support.Suspend Offline collection upon newcommand.Offline surface scan supported.Self-test supported.Conveyance Self-test supported.Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before enteringpower-saving mode.Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported.General Purpose Logging supported.Short self-test routinerecommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 147) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SCT capabilities: (0x303d) SCT Status supported.SCT Error Recovery Control supported.SCT Feature Control supported.SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 03 Spin_Up_Time 0x0027 153 129 021 Pre-fail Always - 33334 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2625 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 07 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 09 Power_On_Hours 0x0032 096 096 000 Old_age Always - 306210 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 011 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 012 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 157192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 77193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 184194 Temperature_Celsius 0x0022 106 101 000 Old_age Always - 37196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Extended offline Completed without error 00% 3045 -# 2 Short offline Completed without error 00% 3042 -SMART Selective self-test log data structure revision number 1SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS1 0 0 Not_testing2 0 0 Not_testing3 0 0 Not_testing4 0 0 Not_testing5 0 0 Not_testingSelective self-test flags (0x0):After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.root@NAGINAS[~]# smartctl -a /dev/ada2smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Device Model: WDC WD10PURZ-85U8XY0Serial Number: WD-WCC4J0UTRPUZLU WWN Device Id: 5 0014ee 20ec9505fFirmware Version: 01.01A01User Capacity: 1,000,204,886,016 bytes [1.00 TB]Sector Sizes: 512 bytes logical, 4096 bytes physicalRotation Rate: 5400 rpmDevice is: Not in smartctl database [for details use: -P showall]ATA Version is: ACS-2 (minor revision not indicated)SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Thu Mar 12 19:19:00 2020 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x00) Offline data collection activitywas never started.Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completedwithout error or no self-test has everbeen run.Total time to complete Offlinedata collection: (13800) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate.Auto Offline data collection on/off support.Suspend Offline collection upon newcommand.Offline surface scan supported.Self-test supported.Conveyance Self-test supported.Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before enteringpower-saving mode.Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported.General Purpose Logging supported.Short self-test routinerecommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 157) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SCT capabilities: (0x303d) SCT Status supported.SCT Error Recovery Control supported.SCT Feature Control supported.SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 03 Spin_Up_Time 0x0027 153 131 021 Pre-fail Always - 33084 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2485 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 07 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 09 Power_On_Hours 0x0032 095 095 000 Old_age Always - 408110 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 011 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 012 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 157192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 77193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 170194 Temperature_Celsius 0x0022 108 099 000 Old_age Always - 35196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Extended offline Completed without error 00% 4063 -# 2 Short offline Completed without error 00% 4060 -SMART Selective self-test log data structure revision number 1SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS1 0 0 Not_testing2 0 0 Not_testing3 0 0 Not_testing4 0 0 Not_testing5 0 0 Not_testingSelective self-test flags (0x0):After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.root@NAGINAS[~]# smartctl -a /dev/da1smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Model Number: SAMSUNG MZFLV256HCHP-000MVSerial Number: S245NACGB88104Firmware Version: BXV75M0QPCI Vendor/Subsystem ID: 0x144dIEEE OUI Identifier: 0x002538Controller ID: 1Number of Namespaces: 1Namespace 1 Size/Capacity: 256,060,514,304 [256 GB]Namespace 1 Utilization: 29,178,368,000 [29.1 GB]Namespace 1 Formatted LBA Size: 512Namespace 1 IEEE EUI-64: 002538 4bf102a2b2Local Time is: Thu Mar 12 19:19:09 2020 CETFirmware Updates (0x06): 3 SlotsOptional Admin Commands (0x0006): Format Frmw_DLOptional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_FeatSupported Power StatesSt Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat0 + 6.00W - - 0 0 0 0 5 51 + 4.20W - - 1 1 1 1 30 302 + 3.10W - - 2 2 2 2 100 1003 - 0.0700W - - 3 3 3 3 500 50004 - 0.0050W - - 4 4 4 4 2000 22000Supported LBA Sizes (NSID 0x1)Id Fmt Data Metadt Rel_Perf0 + 512 0 01 - 4096 0 0=== START OF SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDSMART/Health Information (NVMe Log 0x02)Critical Warning: 0x00Temperature: 60 CelsiusAvailable Spare: 100%Available Spare Threshold: 10%Percentage Used: 2%Data Units Read: 13,809,377 [7.07 TB]Data Units Written: 15,346,363 [7.85 TB]Host Read Commands: 265,192,772Host Write Commands: 209,937,048Controller Busy Time: 3,208Power Cycles: 1,419Power On Hours: 1,129Unsafe Shutdowns: 133Media and Data Integrity Errors: 37,188Error Information Log Entries: 38,428Error Information (NVMe Log 0x01, max 64 entries)Num ErrCount SQId CmdId Status PELoc LBA NSID VS0 38428 1 0x005e 0x4502 0x000 0 1 -1 38427 1 0x0049 0x4502 0x000 0 1 -2 38426 1 0x002d 0x4502 0x000 0 1 -3 38425 1 0x0054 0x4502 0x000 0 1 -4 38424 1 0x0070 0x4502 0x000 0 1 -5 38423 1 0x002f 0x4502 0x000 0 1 -6 38422 1 0x0019 0x4502 0x000 0 1 -7 38421 1 0x0007 0x4502 0x000 0 1 -8 38420 1 0x002c 0x4502 0x000 0 1 -9 38419 1 0x007b 0x4502 0x000 0 1 -

Hello, I have a question: How much RAM do I need for my FreeNAS? I have 3TB of storage, Intel Core i5-6500, 8GB of ram and running everything from a USB Stick. Im also running Pihole and a Plex Server on the same computer. I'm asking because when I look at the dashboard, I see that I never have some Ram to spare. Thanks for the help! Im still new when it comes to Freenas :)

Hi! I already have a Asus Gene viii motherboard, I found a really cheap Intel Xeon Quad Core E3-1245v6 and saw that it's an LGA 1151 cpu. Is it going to work on my motherboard even though its not on the list of supported cpu's? Thanks!