BaidDSB

one last thing for now. i found this cable on amazon india : https://www.amazon.in/dp/B07Y7GVGBF/?coliid=I1P31MTBPUJ8J8&colid=KKUIACF565PR&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it and this is my laptop: https://pcsupport.lenovo.com/in/en/products/laptops-and-netbooks/gaming-series/ideapad-gaming-3-15arh7/82sb/82sb00v2in/mp2k2854 do you think this cable will work with the DP type c on my laptop? also, when i get my monitor, can i DM you when i try to setup my KVM, you explained it well but something still might go wrong?

is it always dci p3? do you cna switch between srgb and dci p3 from the osd ? also.. in india USB C to USB C Displayport cables arent available. how should i proceed? also how do you power it? does the Monitor C power the laptop C? My laptop supports usb PD.

THANK YOU SO MUCH. Now a final few things, 1) How has been your experience? It will be my first 1440p monitor. 2) Thoughts on DCI P3? Im a semi pro 3D artist adn i thought this would help me in color accuracy. 3) How fast is the KVM switching?

Would it be too much to ask for a photo of this from the side profile? so i can see just how low it goes? My clearance is 18.5 inches so its very tight My laptop does support DP over USB C. Should i just plug the USB C monitor to the USB C laptop then?

I have 2 questions: 1) Can you please measure the height when the monitor is at its lowest point in the sliding stand? The height from base of the table to the top of the monitor when its at its lowest [i have limited desk height space]. 2) Can you describe how to setup the KVM? I want to connect my desktop and the second one will be my laptop.

Update: Turns out i had to follow the YT guides on how to rub the ram pins with an eraser. And done! although now, my ram wont even go beyond 2866 mhz, no matter what i do. before it at least went 2933

So my bios regularly resets my ram clock speeds. For 3 years. Also it can't go beyond 3000, or enable xmo/docp. I regularly put my PC to hibernate. Which i read apparantly drains CMOS.... So I replace it once a year. Last 2 times it was fine. This time everything went to shit.

Tried. Nothing.

But I have a 5600x. Do they have on board graphics?

I don't think I left anything out. I just swapped out the old and new CMOS maybe 3&4 times in total.

No I mean the psu didn't have power from the wall. The card was connected to the psu via cables. The 3070 I have have no other bios. Also i have a matx board so no other 16x slot.

I actually used a new CMOS battery too. So I unplugged all the cables and took the car to another room. I opened the glass panel, unscrewed the card. Pulled it out of the slot. Then cleaned it while keeping the cables on. Then I pulled the CMOS. Then I cleaned the rest of the PC for about 30 minutes. Then put in the new CMOS. And then put back the card it. Yes the 2 cables from the psu were attached to the card the whole time. But obviously it was in another room from my desk so no power. Anyway, i then put everything back in. Everything lit up, keyboard, ram, the card lights. But no output on do or hdmi. Btw, I cleared the CMOS again and held the power button for 5 minutes before plugging it again, after I made this post. Also i unseated the ram and stuck it in again. Honestly I don't want to buy a new card if I can help it. But still wanted to ask. Also, is 4070 ti super much better than the 4070 super?

I didn't even unplug the power cables from the card. Pc turns on but there's no display output even though the card light turns on. Just used brushes to remove the dirt. Plugged in the card again. Computer is running on. Ram and everything is lighting up. Even graphics card light is on. But no display on either dp or hdmi. Assuming zotac refuses rma and I'm screwed, what card should I buy, 4070 or the super varient? Can't afford more an this point. Update: Turns out i had to follow the YT guides on how to rub the ram pins with an eraser. And done! although now, my ram wont even go beyond 2866 mhz, no matter what i do. before it at least went 2933

Yeah you don't speak for me. I'm Indian and I say this isnt talked about enough. Also Linus shows again he leared jackshit from his controversy. No wonder Madison wont get justice.

So im considering upgrating to a 1440p monitor. but i want to wait for the 5070 to upgrade my card. so for the time being, will i lose FPS in games in general if i upgrade to 1440p, even if i use DLSS, for the same graphical settings? Say games like Flight sim, Hogwarts legacy, RDR 2... mostly single player games