Jump to content

Devvv

Member
  • Posts

    49
  • Joined

  • Last visited

Everything posted by Devvv

  1. I am trying 3533 and it booted now to see if it crashes
  2. I do but when I do it won’t even post after the first time
  3. It will boot now but, just resets my pc after a bit
  4. I lowered the volts to 1.3 and it booted at 3600 we’ll see if it is stable,
  5. It will post when I change it sometimes then when it goes to boot it restarts,What is docp cuz xmp won’t work
  6. I have an x570 tachi with a ryzen 7 3700x and my trident z neo F4-3600C16Q-32GTZNC won’t boot but sometimes posts at 3600 despite asrock’s web site showing they this type worked with 2/4 dimms
  7. It looks like you can’t fit all four dimms that would be trident z neo rgb at 41mm
  8. I have an x570 tachi with an msi rtx 2080 ventus and i'm going to have 4X8 (32gb) of trident z neo ddr4 and I would like to know if the cooler will fit the mobo and have enough space for the ram, also I already know it will fit my case.
  9. so I ran an adia64 stress test and after about 15 minutes the PHC diode is at 53c, I have an x570 tachi and the gpu an msi rtx 2080 ventus 8gb oc eddition.,it is in the first slot that doesn't touch but blocks the vrm cooler. what would be the max safe temp? also the avg temp is 45c
  10. I have an msi rtx 2080 ventus 8gb oc edition, an ryzen 7 3700x no oc, 16gb of 3200 speed ram, and an x570 tachi. the score I got was 4294 with 71 fps. Also an 650w 80+ gold psu.
  11. Ok I’ll try it when I get home thanks for the support
  12. It’s already installed and yes the bios flashes then freezes
  13. I can get into the bios with the usb in (it may because it has my win10 installer on it) but I have pressed the clear cmos button and turned off the psu, but I haven’t taken out the battery
  14. I have an msi rtx 2080 8g oc, ryzen 7 3700x no oc, g.skill v 16g (8x2), seasonic 650 80+ gold, a 2tb wd blue hdd, cooler master hyper 212 evo, the case is DIYPC DIY-G5-BK Black
  15. When I try to get to the bios without a usb drive plugged in I get a9 error and the screen is black
  16. 3600mhz ram is 3200mhz
  17. That’s what it defaulted
  18. So I was having in problems with my pc freezing/ rebooting with ram at 3200mhz. With my ryzen 7 3700x @ 3600mhz @ 1.10000v. I then set my cpu to 1.2v and it hasn’t crashed yet, is 1.2v safe for stock clock speed?
×