daim2604

Yeah, i already experienced it, which is why I am thinking of limiting the power limit since I am not going to use its full power anyway. I am planning an upgrade but its going to be awhile now before my dream rig come true.. I am going to give it a try with my gtx 1060.. Thanks alot foe the reply.

Hi, Firstly, sorry if this is the wrong section, don't know where to put this. I recently bought an RX 6800 XT. In my other post i post about crashing problem, though i have manage to fix it. Now another issue came up, last night I was playing COD Warzone 2, it was working fine for about nearly two hours or so, when suddenly my pc shutdown by itself. When I turned it back on, now i can't open any game, if i open any game that is demanding such as hogwart legacy or last of us, or even tropico 6. My pc would just straight shutdown by itself, and when it boot back up, it says, asus anti-surge is triggered. My Spec : i7-3770 8GB DDR3 x 2 MSI GAMING RX 6800 XT 1 SSD 1 HDD DARKFLASH AIO 240mm Cooler Master GX 750W I put my old GTX 1060 in, it works fine with tropico 6, but when I run furmark, it straight shutdown with anti surge error again. But if I were to disable anti surge, furmark works fine, but i only test this with my gtx 1060 though. I was expecting that even if with asus anti surge turned off my pc would definitely shutdown if my psu is really bad. Is anti surge reliable? is it safe to use my RX 6800XT with anti surge turned off, because I did read some people said anti surge is not reliable? Let say, my psu is not able to handle the RX 6800Xt, for short term solution while waiting for new psu, Corsair RM850 2021, can i just set the my gpu power limit lower? is it bad for the gpu? Thanks in advance.

found the culprit, I have to remove my GPU screw. my casing has dent on the place where we put screw for the GPU. The screw hole on the graphic card is not align with the one on my casing, I have to force to screw it, which might have made my GPU to lose contact with GPU slot.. so I undo the screw, test again on both games, and it works, no more crash, put my setting on ultra and enable ray tracing, game not crashing anymore. Time to find new casing too.. Thanks a lot guys.. sorry for the trouble! Thanks a lot for suggesting OCCT, I still need to check my GPU if its defect or not.. will give it a try.

Hi, I recently bought a used msi rx 6800xt gaming x trio gpu. How do I test for defect? Firstly, my cpu is very much bottlenecking. I have an i7-3770, planning to upgrade soon, decide to get gpu first. But, is bottlenecking supposed to be crashing game? with time spy i got around 16k score for gpu. I tested this gpu with The Witcher 3, i can set the setting on ultra and i can get 50 - 60+ fps. But when I turn on ray tracing, the game crash. I tested the game on Hogwart Legacy, after i load my game, the game just freeze then close itself and i can see the message out of video memory.. Is bottlenecking supposed to do that or is my gpu defect? or is it because of my psu not good enough? What kind of test can i do to check for defect? my spec: i7 3770 ram 16GB GPU : msi rx 6800xt gaming x trio PSU : Cooler Master 750W Bronze PSU Thanks in advance

I have manage to get this motherboard to POST. and it is using an older bios, so I flash a newer one. The problem is, sometimes the old problem arise, which, turning on, pc won't post. It really is frustrating. This problem is there even before I flash the bios, I thought flasing newer bios would fix it, but still the same.

I have tried putting the speaker, but turning it on, there is no beeping sound.

As I am at work right now, I will give this a try when I get home later and I will give the feedback later. Thanks a lot for the suggestions sir. I really appreciate it!

Tried with on board and also gpu, but both have no display, num lock on keyboard doesn't even light up when I press it multiple times. One thing I noticed is that when I tested it with GPU, my gpu fan ramp up really fast and its very loud. I am trying to put the PC beeper speaker but couldn't find where to plug it in, I will try take a look at the manual and try to find where should I plug it. As for clearing cmos, Is removing the battery cmos enough? or should I move the pin on CLRTC? Thanks in advance. Thanks alot for the suggestion.

I did try with an i5-2400. Similar result, no display at all. is there any possibility that it might have work with i3 2120 but not i5 2400?

Hi, I am trying to build a secondhand pc for myself I bought a secondhand LGA1155 motherboard. ASUS P8P67 LE It took a month to arrive and I was so excited but when I turn it on, nothing appear on my screen. Things that I have tried, Putting i3 3220 / i7 3770 / i5 2400 and also a couple of ddr3 ram that I have. Still same result. Nothing on display. I did try the processor and ram on my brother's spare motherboard it works fine. At this point, is this board that I bought considered to be dead? Anything else I should try? Thanks in advance.

Hi. sorry for the late reply. I've changed my fan setup. I've swapped front fan to custom fan blowing full speed. 3 Intake from the front (custom fan, full blast) 2 intake from the top (custom fan) 2 exhaust from bottom (case fan) 1 exhaust from the back (case fan) I did my test on Horizon Zero Dawn. It does help my temperature, I used to get around 80c playing games on Ultra. Now, my temp is around 65c-74c. But, taking the front glass panel off works too. Now, my temp rarely go 70c. It just play around 60c-70c, sometimes it even goes down to 55c. Spent 2 days trying different kind of setup, and I'm satisfied with this. I am thinking of getting a magnetic dust filter and just slap it infront panel and take off the glass panel forever. Thanks alot guys, for the help and opinion.. I really appreciate it! And really sorry for the trouble and for my english, english is not my native language.

Thanks for the reply. Sorry late though, I'll give it a try next saturday as I'm a bit busy till friday. As for ambient temps, sorry, I don't really know, I have never measured it.

I see. Thanks a lot sir. I'll save up some money for a new case too then.

er, It is actually 8 intake with 1 exhaust through the back. The AIO is also an intake from the top, it is a pull setup. Sorry, for not posting my own image of the case. Yeah, I just got this AIO 2 days ago. Before, my cpu temp is around 70-75 when gaming. Oh. so it is case problem then. So the front fans are only for aesthetic then. Is there any thing I can do to help the airflow? Sadly, putting 2 fans underneath the graphic card as an intake blowing full speed doesn't help.

Oh, dang, I didn't know about that. I'll give that a try. I did try swapping my current working ram in the other slot and it works fine. I'll try contacting Kingston then. Thanks alot sir! I really appreciate it!

Thanks for the advice sir. For the AIO, hehe, I just bought it for the aesthetic. But, I do plan on upgrading my board and proc but still saving money for it. As for the ram, yes, it is a single stick of 8GB RAM. I used to have dual channel, but the other ram died recently. My pc won't turn on with it installed, so I just take it out for now. Thanks for the suggestion, I'll focus on adding another stick of ram then for now. Thanks alot for the advice sir!

Hi. My spec : I5 8400 - AIO Tracer Darkflash DT-240 8GB DDR4 Zotac RTX 2070 Super Twin Fan PC Case : AVF Gaming Freak M2 820G Power Supply - Cooler Master GCM750 FAN : 2 ID-Cooling PL-12025-R - INTAKE - BOTTOM - FULL SPEED 3 CASE FAN - INTAKE - FRONT - FULL SPEED 2 AIO Tracer Fan/1 Radiator TOP - INTAKE - PWM CONTROLLED 1 CASE FAN - EXHAUST - BACK - FULL SPEED Thats my setup currently and my graphic card temp is at around 78c - 83c when playing heavy game like Red Dead Redemption 2 or Deus Ex Mankind Divded. Is this normal? is my airflow ok? My pc is in my living room and doesn't have aircond, just ceiling fan. Cpu temp is ok since I''m using an AIO, usually under 50c. Sorry, and thanks in advance.

thanks for the reply.. i'll give it a try and see how it goes.. thanks again!

Hi.. Sorry if this has been asked before. I've tried googling to no avail. I'm using ASP.NET (VB.NET) and SQL Server 2014. This is my situation : I'm creating a bidding system. The bidding is done by session. For example, session 1, bidding time is on 20 april 2020 - 30 april 2020. In 1 session, there will be multiple items to be bid on. The bidding itself is done separately from each item. My problem here is that, once the bidding ends or timer on page reach 0, I need to send email to the participant automatically for all items. Solution that I have think of but might not work : I've thought about doing a dynamic job using sql server, but there is permission issue and also might be taxing on database server. Once the timer reach 0, the page will automatically invoke a stored proc that will process the winner and then send the email, problem with this method, is that, what if there is no one on any pages, so no email will be sent at all. Please share your opinion and thoughts. Thanks in advance.

Sorry for the late reply. Thanks for sharing sir. I've changed my cru following yours sir. Sadly, I can't try it with the game that I've played before since my hard drive just died. Redownloading the game going to take a while since I have a very slow internet. Once, I got the result, I'll report back here. Thanks again sir.

Sorry for the late reply. I've tried re-installing monitor driver and it gives same result. I tried running the nvidia pendulum, and simulating 60 fps didn't give me any flicker but anything lower than that gave me flicker. Is it normal if fps dip below 60 screen will flicker? if it is I guess I might have use wrong game setting then I might need to lower some setting. EDIT : Please close this thread. I already contact nvidia support center and they said my monitor isn't g-sync certified. T_T.. Hardware Unboxed is wrong T_T (I decided to buy this monitor by watching his video cause he claimed that G-sync certified or maybe i just misunderstood what he said) T_T..

Thanks for the reply. I've checked my monitor setting, and DSR is already off. EDIT : Sorry, I mean that DCR is already turned off.

Hi, I recently bought an AOC CQ27G2 monitor. It is a Freesync monitor with adaptive sync. Its my first 144hz + 2k monitor and it works really well. It just that when I play shadow of the tomb raider, I noticed that there are flicker, well not at all time, just at certain place like peruvian jungle, right after the plane crash (sorry if you don't play that game as right now I only noticed it in that game). I've read on AOC site, that the screen comes with "protect your eyes from flicker" functionality and G-Sync compatible. Nvidia Control Panel detected the monitor as - AOC Q27G2G4 (G-Sync Compatible). What are your thoughts on this? Is it normal because I'm using nvidia card and turning on G-Sync? Sorry, I'm not that knowledgable in monitor. Thanks in advance. my spec : I5-8400 16GB DDR4 RTX 2070 Super