Jump to content

trgjosh

Member
 View Profile  See their activity

  • Posts

    18

  • Joined

  • Last visited

 Content Type 

Everything posted by trgjosh

  1. trgjosh
    The difference between the 9100 and the 9100f is that the 9100f dosent have the intel integrated graphics.
  2. trgjosh
    It’s ok to get temp spikes even up into the high 80s or low 90s occasionally as long as you maintain averages of 80c or under. If you are still uncomfortable with the temps you can always try under clocking your cpu.
  3. trgjosh
    This happens on most or all mechanical keyboards. It happens on my black-widow elite with razer yellow switches.
  4. trgjosh
    Do you know where I can get this cable?
  5. trgjosh
    It’s step 5
  6. trgjosh
    I recently bought the 3x 120mm aergb fans with hue 2 from NZXT but on step 5 it tells me to connect 4 pin power cable to open fan header on my motherboard. The problem is I can’t find that cable anywhere and it’s not on the component list so I was wondering if it’s something I need to buy separately and if so where can I buy it.
  7. trgjosh
    I put the previous cooler on and it worked. I’m pretty sure the x72 has a very weak or defective pump so I’m sending it back today. Thank you all for the help.
  8. trgjosh
    @schwellmo92 Previous cooler which is the EVGA clc 240 gives temps that max at around 81c under load.
  9. trgjosh
    I would recommend a razerblade 15 with a rtx 2060 max q and i7 8750h
  10. trgjosh
    @Lonehelljumper what’s your budget?
  11. trgjosh
    @bignaz this sounds similar to the problem I’m having but it worked just fine with my previous cooler and I didn’t take out the cpu during the transfer.
  12. trgjosh
    @For Science! 3pin pump is connected to cpu fan header, then I connected the sata cables and the fans are connected to fan hub.
  13. trgjosh
    @For Science!
  14. trgjosh
    I’m almost ? sure that the pump works. When the computer is on both it and the tubes vibrate and I can hear it pump water through.
  15. trgjosh
    @Valkyrie Lenneth both cpu and water block is mounted correctly and I did make sure to do the cross patter with the thumb screws.
  16. trgjosh
    @TheKDub I haven’t installed NZXT software yet, however both core temp and the bios says that the cpu is running upwards of 90c.
  17. trgjosh
    @Denned @TheKDub I already did that and re applied the thermal paste. It is very well mounted and is fastened tight to the mb.
  18. trgjosh
    So I recently bought a new case and new fans as well as a kraken x72 to help cool my 9900k. Every thing is installed correctly and plugged in and the pump is working but as soon as I boot up the temps immediately spike to 95-100c idle.
×