faizmubarok

Hello. My PowerColor RX 570 4GB used to run at 83c full load on max clock. I thought that temperature was high so I replace the thermal paste myself. After putting all back in, I notice the 15c degree temperature drop to 68c. But my clock runs significantly slower and the result is 20% worse in superposition. I noticed that my vrm thermal pad was ripped. My vram pads is still intact. Any possible solution? I already ordered a new thermal pads for my vrm. But will it fix the throttling? As far as I know, only vrm and vram use thermal pads. Please correct me if I'm wrong. Any other possibilities that I've overlooked? Edit: - My Gpu temp reading was 68c. Was it only the gpu chop or it includes vram and vrm temp. I thought that something is holding the gpu clock down.

Yes it sometimes went to 110+. Thank you. There's indeed a bios switch. But it only change maximum core speed. The bios hasn't been modded yet. I'll try to benchmark my gpu. Looks like the performance stays the same in Dota 2 and mhw.

No, thermal pads stay intact.

Don't work. The tdp is about 150 watt. This gpu should draw close to that. But instead it's capped ad 100 watt.

I just replaced the thermal paste. Nothing more. Psu is corsair 450watt.

Any suggestion? I have no problem running games and stress test. But the power is capped at 100 watt which throttle my core clock speed.

The thing is, my gpu drew 130 watt before thermal paste replacement. But now it only draw 100 watt Max. Did I do something wrong with the board?

Quite low. 70c. It used to be at 80c. Maybe because the core clock not at maximum.

Can anyone help please. I used to run furmark at 1320Mhz. But now my gpu usage is 100% but the core clock hover around 800mhz. Power can't go over 100 watt.