chawndi

When it used to be oc'd it'd never get too hot regardless. It used to be at 4.5 1.34/5 for ages until I reset bios. OC worked again after with internet then didn't one day but will look into a lan card for sure.

Looks like it might be to be fair, I run it with a Corsair H80i GT v2 and have it setup where it never goes above 75 playing games or editing.

I've been told 4.5 @ 1.34v is a good amount for an oc on a 5930K and haven't tried it right yet as this is happening with my onboard LAN. I don't know if it's taking power from the LAN when I overclock at all or just needs a driver update maybe.

Didn't touch the bclk at all.

Through the BIOS.

I have a i7 5930K currently sat at base clock of 3.50ghz, 16GB of GSKill 3200Mhz DDR4 ram, and an MSI X99A Titanium motherboard LGA 2011. Whenever I attempt to overclock the cpu everything works fine besides my onboard LAN disappears and I can't find any networks even though I'm on ethernet. Have tried numerous things but it does not seem to work at all so far, not sure if my motherboard drivers are up to date as i'll have to double check later but so far I don't know what I can do to fix it. NOTE: Overclocked in BIOS. Thanks.

Lovely.

As of this morning, when I went to lean back in my chair a little bit I noticed the back shot back like I had pulled the lever up to allow myself to recline but I wasn't, tried tightening every bolt on the chair but it still continued to do it regardless. Don't know of a fix, or any reason why this is happening.

I completely re installed geforce experience yesterday but i'll take a look at a complete overhaul of doing the sound drivers too.

I use my microphone on shadowplay for most clips that either include conversation or so, have always used it and like to. I don't have Nvidia Voice installed, and by that I assume RTX voice?

.

Just got my modmic today and....It sounds horrible? Insane amounts of static whenever I talk or in shadowplay clips...Quality just seems terrible. Heard so much good stuff about these mics and I guess I'm the lucky contestant who's sounded quite the opposite. Any help if theres any software or any tips to remove alot of this static/whitenoise?! Thanks.

Ohhhh ok great! I was just wanting to make sure there wasn't any drastic difference or something between the two so I guess if they're both the same then it's fine

I'm debating on buying the C920 and on amazon there's a deal which both of them are on sale for £59.99 Only thing Im confused about is that the C920 Pro HD better than the C920e? They look the same in most matters so I'm wondering if they'd be different in terms of quality, I've had a C920 Pro before in the past and I can get the C920e tomorrow due to the shipping. Any help?

So tomorrow my Samsung 860 EVO 500GB arrives, I'm swapping this from my Kingston VSS300 Which I've had for numerous years and has recently been performing poorly, and in general my pc is just full of cluttered shit and a million programs which have sort of made my pc not let other programs work. But besides that my question still remains. So, I've put all my important files and games etc onto my M.2 ssd and my plan is this: Put everything onto my M.2 Take out the m.2 so on the windows reset it doesn't wipe my m.2 so to say. Put a windows boot file onto the new ssd Disconnect my old ssd, restart with just the new ssd and get windows setup on it fresh. Re install the m.2 and yes???? I'm assuming this may work???? Correct me if I'm wrong, honestly haven't really touched my pc in a long time besides cpu/mobo/cooler upgrades blah blah and nothing really windows wise. Thanks:)

Hi, somewhat recently my shadowplay recordings have been coming out at 19.20fps (I'll attach an image of the properties.) I don't know how or why it happened it might've been an update or just out of the blue with my graphics card. Specs: i7 5930K @ 5.0 GHz / STRiX GTX 1060 6GB / ASUS X99A TITANIUM / 16GB G SKILL TRIDENT Z DDR4 / Kingston 120GB ssdnowV300 / Samsung 970 EVO 1tb m.2 ssd / EVGA G2 850 I play mainly rust and the division 2 and it seems like anytime I alt f10 something and look back through it in my videos it's just horrendously low fps. I get above 60+fps in both games, which is what it's set to record at so it's very confusing on why it's doing this.

Yeah, I'm playing CS:GO and Rust and so but I have it set so the microphone volume level stays the same through the cfg file, there's a line called "voice_mixer" or something along those lines where you can choose what level it is at, and i have it set to match my windows settings.

It's always disabled. I have it set to a slider. The mic just gets fucked up by itself randomly.

Is there anyway I can do that? Because I run a lot of programs that I don't know if i'd be able to check if they control my mic. It just happens randomly even like mid talking or, if i'm sat watching videos, or just playing games.

So. My persistent issue is still around. For some strange reason my mic likes to adjust its sound? It's always on 100 on the level on windows, and the Audio interface is turned up a bit aswell. I have a RODE NT1-A With a Behringer UMC22. This only started happening recently and has been a pain for such things like discord. I've unticked the "exclusive" stuff and not letting it be taken control of, I've done the communications thing where it wont do anything if other programs intervene. I'm stuck for answers.

Could try that yeah. It's just weird how it only happens on discord.

Seems like it yeah, it's super strange.

Yeah, everything else seems fine. Nothing seems to change in levels in my shadowplays or so, as I have Mic On.

Anyone have any fixes for My mic going super quiet in discord randomly? I have a RODE NT1-A XLR with a Behringer UMC22 Interface and recently it's decided that it wants to go super quiet if I move it the slightest, or sometimes just randomly. I have the levels at 100% and I have all of the little extras on discord turned off which can control my microphone, I also have off the "Let programs exclusively take control of this device" etc etc. Is there a simple fix for it at all?

So, I use a Behringer UMC22 and a RODE NT1-A. I never really bothered with installing the drivers before because with a plug and play sorta thing that happened with it I never really bothered, and it worked perfectly, audio would come back through both ears lets say in a shadowplay clip for example. Today whilst updating my Behringer drivers to: BEHRINGER_2902_X64_2.8.40 straight from their site, I noticed that the microphone became a "Line-in" device and only gave me the option for 2 channel input from my microphone,and it's just been a real bother with what side it comes out of. Hence why it was coming back through 1 ear. I have searched far and wide for fixes, like uninstalling the drivers and whatnot but that only causes my microphone to not be recognised. It works fine for people in discord, they hear me without a problem, but in any other program it's havoc and only comes from one ear. I'm hoping someone is out there who knows a simple quick fix that I'm a bit too blind to see. Thanks, Chawndi