Jump to content

MonHunManiac

Member
  • Posts

    10
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Profile Information

  • Gender
    Male
  • Location
    Indonesia
  • Interests
    3D Renderings

System

  • CPU
    I7-8750H
  • Motherboard
    ASUS TUF FX505
  • RAM
    8 GB
  • GPU
    GTX 1050Ti 4GB
  • Mouse
    Logitech Prodigy G102
  • Operating System
    Windows 10 64-Bit 1809

MonHunManiac's Achievements

  1. Thank you so much! turns out I followed your tutorial before, the one I posted is a rough remake. that aside, I've contacted ASUS, and they decided to RMA my laptop again. Got a new motherboard now, problems gone, hopefully not to reappear.
  2. I found a guide somewhere, the better one should be smoother no? It was smoother, but the screenshot I sent was a rough one. Would love a guide if it's not bothering you. I'll try to talk to asus later, thank you so much for your help on this topic.
  3. i lost the settings due to the reinstall, but if i recall correctly i uv'ed ~100mv at stable gpu load and temp running Unigine Heaven (1747MHz at 950mv). This laptop does have bad history with the hardware, first week I got it, i had to RMA the motherboard for a new one because of faulty GPU. then It's all smooth until now. By the way, does a render session can/ might damage a GPU? i've been rendering an animation with Blender (CUDA Powered) for 1-2 hours prior to noticing the problem, render performance got affected too. I always make sure to monitor the temp to not go above 90 during renders. Graph similary looked like below.
  4. I've undervolted GPU and CPU also underclocked cpu to 3.3GHz on previous prior to this problem happening for a few months, temp hovers around 85c. By the way whats a lemon?
  5. Ah sorry, I messed up with the sharing settings. Try the link again
  6. Here are my results: https://drive.google.com/drive/folders/1yjSERdY6zb6w5eXsPzg2bQEYKFe53EcM First result is stock with no undervolt or underclock applied, I noticed that my system (with UV and UC) is thermal throttling with Heaven and AIDA64 combined, so I did second test with turbo boost disabled to eliminate temp throtttling on cpu.
  7. checked with HWmonitor and Throttlestop, maybe occasionaly. but temp stays below 95c. been running this config for months with no throttling issue and performance was good. edit: i also undervolted my cpu to help with temp, already undone that.
  8. Very Recently, my laptop performance dropped visibly in games (checked in Witcher III and Unigine Heaven, also Blender GPU Performane), fps drops from 50ish to 15-20, I havent updated my drivers since the win10 May 2019 update and performance was fine, dont know what's causing the Issue, no Thermal Throttling, CPU clockspeed is normal and can reach max turbo clock, but utilization is low (5-15%), GPU runs with no problem (99-100% usage, 1747MHz). When I noticed the performance drop, i got BSOD with code FAULTY_HARDWARE_CORRUPTED_PAGE, never happened again though. seems something happened with resource/cpu usage since my cpu temp usually hovers at around 85 on load to 60-70 now. Specs: - ASUS TUF GAMING FX505GE - Windows 10 Home 64-bit 1903 - CPU : I7 8750H - GPU: GTX 1050Ti 4GB - RAM : 8GB - NVMe KINGSTON RBUSNS8 (512gb) - KINGSTON SA400S374 (SATA 2,5" SSD) Steps I tried: - Clean install Nvidia and Intel Driver with DDU - Using newest drivers - Using ASUS drivers - Disabled Fast Startup on system settings - BIOS Reset - Disable VT-D in BIOS - Flash BIOS from 305 to 304 (both was working perfectly until now) - Reinstalled ACPI-Compliant Battery Driver - Uninstall NVIDIA Geforce Experience - Refresh Windows - Clean Install to Win10 1809 - Memory Diagnostic (no errors) and the problem still persists , anyone having similar issue? any help would be very appreciated. screenshots of Unigine Heaven Score and HWMonitor during Benchmarks: https://ibb.co/9wp0c22 https://ibb.co/F66hGhq https://ibb.co/KmH1tMs https://ibb.co/QN09HW0
×