MrTsao9

Yes, I’ve tried all of the slot configurations available to me and I still get inconsistent crashes and boot times.

After completing my latest build, I noticed that the system can take up to a minute to post. I am using a Ryzen 5 3600 with an MSI B450 Tomahawk board and 16gb of 3200mz memory. Additionally, the system would occasionally blue screen with the code MEMORY_MANAGEMENT and both AIDA64 and the Windows Memory Diagnostic tool reported memory hardware failures. After removing one of the two DIMMs, the post times dropped to only a few seconds and there were no detected hardware failures. This was identical across both DIMMs when tested one at a time. However, when I tested running both DIMMs at the same time, the errors reappeared, regardless of which slots the DIMMs occupied. I also tested the DIMMs in dual and single-channel configurations, and the errors persisted. Additionally, changing the memory timings in the BIOS causes the system to fail to post until I reset the CMOS. Does anyone know a solution to this problem, or is this more likely a failure of the motherboard/CPU memory controller? Thanks all. TLDR: System behaves normally when using only one 8gb DIMM, but crashes and reports hardware errors with 2 DIMMs in any configuration.