YikesandIkes

So I just realized that I have screwed my HDD in with the wrong screws, but I cannot find the ones that are supposed to screw them in(I believe the PSU screws are) Instead I used a smaller headed screw but it still screws into the HDD and isn't loose and it screws in and gives tension to the point where it will no longer screw in(unless I try super hard,but I know not to do that because overtightening is not good.) is it fine to have the HDD in with these screws or does it specifically have to be the hexagon headed ones(Im not talking about screwing it in from the side, rather the bottom because my HDD hangs face down in my case)

It only seems to have some scratches on the top, theyre not deep or anything just seem to have scratched some paint off

So, I was building the a modded Coolermaster lite 5 rgb and when I put my psu in it refused to come out, the fan grill was clamping onto these little rubber pieces that I assume are supposed to keep down the vibration of the pc or some shit. Well it took a lot of wiggling and force to get it out and it finally popped out with a bunch of scratches all over the top. Will these scratches affect anything or void the warranty(PSU works just fine by my knowledge)

G.Skill Aegis 16gb 3000mhz was just going for $52

so most likely not the lackluster psu?

That would not explain the freezing or black screen though.

So, I recently been playing lots of games with my friend and his pc randomly freezes for about 10 seconds and then he can continue playing after the freeze, it happens periodically from time and time and even in super light games such as Minecraft or Brawlhalla. Also, whenever he turns his pc on it boots up and nothing will load, then the screen will turn off on its own and turn back on. My guess is that this is his power supply, as I had reccomended a EVGA Supernova 650 G2 at the time and he took it as "just go out and get any 650w power supply" here are his system specifications CPU:R5 2600x (Stock cooler) RAM:CORSAIR Vengeance LPX 16GB MOBO: MSI B450 GAMING PLUS GPU:RTX 2070 PSU:EVGA 650w N1 (yikes) Storage: 240gb SSD, 1TB HDD CASE:Corsair Carbide Spec 04

The little lip my gpu hook is supposed to clasp on isnt in all the way. Its just not fully clasped it doesnt look like

Im sadly to admit that I have broken a DRAIN pin on my motherboards USB 3.0 header(Usbs work fine). This pin has been broken since I built it in Janurary. This is a ground for the USB 3.0's shield drain. Which is apparently a safety precaution. This worrying me a lot because I dont know what will happen if this shielding is to become charged. Also I recently had a PSU die around 2 months ago, are these two possibly related?

I highly doubt this is even the place to come(but ive posted on other places to no answers) ,but I just need some tape thats not conductive(and this is the only tape I have). Probably the dumbest question I've ever asked but I need to know.