AlexD1990
-
Posts
11 -
Joined
-
Last visited
AlexD1990's Achievements
-
I've started a weird GPU thread now because of that XD there are so many on amazon too.
-
What is the weirdest GPU you have seen? Can anyone better the below? TOOGOO Gtx1050Ti Skynet Image Card 4Gb 128Bit Gddr5 Dp/Hdmi/Dvi 768 Cuda Core 3000Mhz 7680 X 4320 / 60Hz https://www.amazon.co.uk/dp/B07QLWP8L9/ref=cm_sw_r_cp_apa_i_2hK9Cb2940WWN
-
Going off thread a little and talking of Forest Whittaker eye.... Look at this XD TOOGOO Gtx1050Ti Skynet Image Card 4Gb 128Bit Gddr5 Dp/Hdmi/Dvi 768 Cuda Core 3000Mhz 7680 X 4320 / 60Hz https://www.amazon.co.uk/dp/B07QLWP8L9/ref=cm_sw_r_cp_apa_i_2hK9Cb2940WWN
-
It was given to me by a friend, it was out of his old PC so luckily I haven't lost anything other than time. I've given the thing Forest Whittaker eye so many times and I haven't even booted it fully yet XD Thank you for the help it's much appreciated.
-
Would a GT710 be sufficient enough to test? Just for ref my specs are below Ryzen 3 1200 (upgrading to 2600x when prices drop further) Msi B450m Pro vdh v2 8gb corsair Vengeance ram Aerocool integrator 700w 80+ bronze GTX 970 (possibly broken) 120gb Drevo Ssd (boot drive) 7.2k rpm Toshiba HDD (mass storage)
-
Unfortunately I don't have a card laying around as it's my first ever build. I might need to buy a lesser card on amazon to test it then if it works return the cheap card and get a better one. I just find it strange that it gets past the cpu and ram check then stops at the gpu until its plugged in then it just doesn't boot at all.
-
Hi, I posted in the motherboards forum as I was having issues with my new build not turning on, my mobo now gets past the CPU and RAM checks on the ez debug however I'm having issues with the GPU. So, when it's plugged into the pci slot without the power cables plugged in the system turns on however the ez debug stops at the vga light which would indicate an issue with the GPU which I get because it isn't plugged in, HOWEVER when I do plug the 8+6 pin connectors into the card the PC is having none of it and won't start at all, goes back to the single flash on the CPU light and gets no further, would this indicate that my GPU is dead, it was given to me by a friend so luckily I'm not out of pocket and I'm looking at an Rx580 8gb card if it is bricked. Thanks Alex
-
Ez Debug Msi b450m Pro vdh v2
AlexD1990 replied to AlexD1990's topic in CPUs, Motherboards, and Memory
Unfortunately I don't have another board or cpu because this is a first build. Update on it, the gpu fan twitches but that's all now. I don't know whether that's a good sign. Maybe I should have just gotten a pre build because this is so frustrating. -
Hi, Posted yesterday about the same thing but didn't get any replies. Basically I have built my first PC using the above motherboard, when trying to power it on the Cpu light on the Ez debug flashes white once and then goes off. Can anyone shine some light on what the issue is??
-
Anyone?
-
Hi, I have just built my first PC. Specs below Ryzen 3 1200 GTX970 8gb corsair vengeance 2133mhz ddr4 B450m Pro vdh v2 mobo 120gb drevo SSD (Boot drive) Toshiba 7200rpm HDD (bulk storage) I have gone through all of the motherboard manual when putting it all together, I'm 99.9% sure everything is plugged into the right place, I've deconstructed and rebuilt twice now and I'm having the same issue. When I try to turn the PC on I just get a single white flash on the EZ Debug panel for the CPU. It just flashes once and then absolutely nothing else happens. None of the fans spin, PC doesn't boot in any way and none of the other lights flash. Can someone explain to me what the issue is, I check an MSI website and someone there had said that the CPU should flash white and go off, then the DRAM light should flash and go off as it goes through the boot cycle, is this the case? Is it a boot issue with the Ram? Please someone help before I throw this thing out of the window XD.
.png)
