angelodaroma

Thanks a lot. i think the core 500 is one of the best alternatives if i can't find the inwin because i could reuse my actual corsair h115i for cooling.

I wanted to build this pc around the Ryzen 9 3900x and I think that I'll keep my actual gpu (Gtx 970) .Ah sorry I wanted to say NH d15s that has 160mm height with that fan.

Hi, I was thinking to build a new pc and I wanted to be able to fit it inside a travel bag to carry it around. My first choice was the inwin a1 plus because it supports big coolers and long GPUs and has a good fan layout. I was trying to buy it but I wasn't able to find anyone who shipped it in Italy. Where can I buy it? If I can't, are there some alternatives that can fit a noctua NH d15 and 300mm gpu with the smallest form factor possible?

Okok, thanks a lot for the info. I think I'll leave it open.

Okok, thank for your help, now I'm getting similar temps with my of profile. I think I'm going to liquid metal my CPU to lower them a bit. Have you got some suggestions for which silicon to use to put the CPU back together?

Just fixed my problem by giving a punch on my radiator. I think some bubbles had formed. My water temps went 15C dawn and CPU temps about 20C. Here you can see my aida64 graph that shows the moment when I punched the radiator.

Over the cpu the thermal paste Is well spreaded, I reapplied it multiple times. If it was a thermal conduction issues my water temps should be lower then 45C right? What water temps are you getting?

I checked the spread on the waterblock and it wasn't bad.

Hi, I was trying to overclock my i7 4790k but I'm stuck at 1.255v @ 4.5 GHz. As soon as I start the test with Aida 64 the temps rise all the way to 80-90C (ambient temp around 23C) and the water jumps to around 45C in the next 10-15 mins even after delidding the chip and changing several times the thermal paste. I also added washers to the backplate to tighten in the backplate on the motherboard (this step lowered my temps from 100C to 90C). Are these temps normal? Is this a cooler related problem? Should I RMA my h115i? I'm using an asrock z97 extreme 6 motherboard, Corsair h115i cooler with 2 noctua ippc 3000rpm fans and noctua nt-h1 thermal paste on both sides of the IHS.