Josem4
-
Posts
12 -
Joined
-
Last visited
Josem4's Achievements
-
Hi everyone! I have this problem right now with this mobo... In the manual it says that is possible shared up to 16GB of RAM (if you have the double amount installed on the system) with the iGPU but in the bios settings the maximum that i can set is 2GB. I have 16GB of RAM @ 3000Mhz. My BIOS version is: 3.30 (I tried the 3.70 and get nothing but bugs so i have to downgrade again to 3.30). So i don't know what to do now. If anyone knows this motherboard i'll appreciate your help! -
My bad. I wrote something bad in the post. What i need is the connections diagram. Because the fan controller cables where cutted off and i need to know where i have to reconnect/solder the new cables.
-
Hi everyone! A couple of days ago i've purchased this sentey case very cheap because it's fan controller doesn't work. I've opened it to see what was happening and i they tried to solder replace pieces in the fan controller pcb (and they've done a really bad job). So i fix that BUT the guy also cut off the cables and now i've got the PCB alone without the cables to the PSU, Fans, etc. So i have the board connected to the potentiometer and i need to know where to solder and connect the rest of the cables
-
Josem4 changed their profile photo
-
Does anyone have a Foxconn 2AFB MOBO? (HP OEM Cupertino 2)
Josem4 replied to Josem4's topic in Graphics Cards
I tried a GTX 1050ti and didn't work. I tested the card on a non-oem system and worked well, Also i search for information and a lot of people had issues with this Mother (Even with the old GTX 750ti) But in any forum anyone made a list or some like that with the compatible cards with this MOBO, even on HP site). So i want to know what is the most powerfull card compatible with this mother. -
Hi! Anyone has or know something about this MOBO? HP PRO 3400 Series MT Foxconn 2ABF 4Mb BIOS H61 Chipset. Not compatible with Ivy Bridge or K (unlocked) processors. This Mother is from a HP OEM PC (you know how are these kind of OEM systems) and i want to know what is the most powerfull graphics card compatible with this Mother. I can't find any usefull info on HP website so i ask to you. I buyed non OEM mother to move the CPU, RAM; etc to the new one but that mother worked like a week and died... I want to know what is the most powerfull card compatible with that mother to keep using it. Right now (in my country) the 1155 MOBO's are ridicously expensive to buy another one. Obviusly i already upgrade the PSU to an 550w 80+ bronce PSU
-
No, is this one
-
I tried a glitch in the motherboard that a guy find and shared on YouTube, IT WORKED! but is a little tricky to make it run (and like 3 minutes of waiting). Also i read a post of a guy who recommends to flash a moded bios but for that i need to reeplace the Bios chip on the mother 'cause the new bios is 8Mb and the chip of the HP is 4mb... I don't have the tools needed for that so i think that wait 3 minutes until the PC is fine for now, but i will change the Mother+Case sometime. Thanks
- 17 replies
-
- 1
-
-
- mother
- compatible
- (and 3 more)
-
The 550w PSU i put on the HP has two 6+2 connectors but the GTX 1050ti doesn't have any connector, it just takes power from the mother. I can't find any information of the MOBO to know if it delivery the 75w that requires the GPU. How can i know how many watts the mother is giving to the card?
-
The i7 still has enough power to play some games but the 1155 motherboards are expensive and i wanted to look for a solution to avoid buy a new one. Also the HP case have a weird flipped design and popietary front panel connectors, so if i buy a new MOBO i'll need to change the case... That's a lot of money that i don't have right now (counting the new PSU i bought for my courrent PC and the GTX1050ti i want to put on the HP)
-
Can you tell me the name of that card? maybe there is some information about what it has inside to be compatible with that OEM HP system
-
It doen't show any error. Just get stuck on the MOBO logo. This PC was using originally a HD6570 and worked fine, when i changed to my actual PC i gifted that card and install Intel HD graphics driver and it worked like that until now... If i took awat the GTX it works fine with IntelHD.. Also i tested the GTX in my actual PC and it works so it seems to be some incompatibility with the GTX
-
Hi, greetings from Argentina! I have an old HP PRO 3400MT PC (Foxconn 2ABF motherboard) with an i7 2600 and 8gb ddr3 1333Mhz that i want to give to my GF to play some games. Recently i changed the power supply of my PC and i put the old 550w PSU to the HP and worked great (with the Processor Integrated Graphics) BUT it doesn't work when i put a newer graphics card (GTX 1050ti) I read in some forums that the problem is something related to Legacy BIOS... I updated the BIOS as they recommend (to 7.16) and it still doesn't work... What can i do? some solution? UPDATE! I tried a glitch in the motherboard that a guy find and shared on YouTube, IT WORKED! but is a little tricky to make it run (and like 3 minutes of waiting). Also i read a post of a guy who recommends to flash a moded bios but for that i need to reeplace the Bios chip on the mother 'cause the new bios is 8Mb and the chip of the HP is 4mb... I don't have the tools needed for that so i think that wait 3 minutes until the PC is fine for now, but i will change the Mother+Case sometime. Thank you all!
