Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Arktius

Member
  • Content Count

    28
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About Arktius

  • Title
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Could explain what it's exactly going to clone? The command bootrec /scanos found a Windows installation on J. Can't I use the command bootrec /rebuildbcd?
  2. But the system had booted before on the other SSD with the same order for the partitions. The order of the partitions shouldn't cause the error.
  3. Are you sure? According to this website it says: The System Reserved partition contains two important things: The Boot Manager and Boot Configuration Data: When your computer starts, the Windows Boot Manager reads the boot data from the Boot Configuration Data (BCD) Store. Your computer starts the boot loader off of the System Reserved partition, which in turn starts Windows from your system drive. ... The System Reserved partition consumes 100 MB of space on Windows 7, 350 MB of space on Windows 8, and 500 MB of space on Windows 10.
  4. SSD 1 and 2 weren't connected to the mainboad. Don't get confused by the output from diskpart. Both aren't listed there. I just call them 1 and 2. We could also name them samsung 830 and samsung 850 if you want. Device 2 is the NVME with Windows 10 installed. I did a sector-to-sector clone. I used easeus backup.
  5. Hello everybody, I get a blue screen with the following error code: 0xc000000e ...device is inaccessible. How did it come to this? I've cloned my OS from SSD1 to a new NVME. I could boot the system even with SSD 1 and 2 being unplugged. I've cloned all data from SSD2 to SSD1 and then got the error. Windows repair didn't help me. Diskpart output: Microsoft Windows [Version 10.0.18362.175] (c) 2019 Microsoft Corporation. Alle Rechte vorbehalten. X:\Sources>diskpart Microsoft DiskPart-Version 10.0.18362.1 Copyright (C) Microsoft Corporation. Auf Computer: MININT-MH5662N DISKPART> list vol Volume ### Bst Bezeichnung DS Typ Größe Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 N DVD-ROM 0 B Kein Medi Volume 1 C Intenso NTFS Partition 238 GB Fehlerfre Volume 2 D Alisa NTFS Partition 72 GB Fehlerfre Volume 3 E Media NTFS Partition 1000 GB Fehlerfre Volume 4 F Programme NTFS Partition 1000 GB Fehlerfre Volume 5 G Stuff NTFS Partition 300 GB Fehlerfre Volume 6 H 24 NTFS Partition 119 GB Fehlerfre Volume 7 I NTFS Partition 94 GB Fehlerfre Volume 8 J NVME NTFS Partition 930 GB Fehlerfre Volume 9 K NTFS Partition 524 MB Fehlerfre Volume 10 L NTFS Partition 496 MB Fehlerfre Volume 11 SYSTEM FAT32 Partition 100 MB Fehlerfre Versteck Volume 12 M ESD-ISO FAT32 Wechselmed 14 GB Fehlerfre Volume 13 O INTENSO FAT32 Wechselmed 29 GB Fehlerfre DISKPART> list disk Datenträger ### Status Größe Frei Dyn GPT --------------- ------------- ------- ------- --- --- Datenträger 0 Online 238 GB 82 MB * Datenträger 1 Online 2794 GB 208 GB * Datenträger 2 Online 931 GB 136 MB * Datenträger 3 Online 14 GB 0 B * Datenträger 4 Online 30 GB 0 B DISKPART> sel disk 2 Datenträger 2 ist jetzt der gewählte Datenträger. DISKPART> list part Partition ### Typ Größe Offset ------------- ---------------- ------- ------- Partition 1 Primär 930 GB 1024 KB Partition 2 Wiederherstellun 524 MB 930 GB Partition 3 Primär 496 MB 930 GB Partition 4 System 100 MB 931 GB DISKPART> exit Datenträgerpartitionierung wird beendet... X:\Sources>bootrec /scanos Alle Datenträger werden nach Windows-Installationen durchsucht. Bitte warten, dies kann einige Zeit in Anspruch nehmen... Die Suche nach Windows-Installationen war erfolgreich. Gesamtanzahl der identifizierten Windows-Installationen: 1 [1] J:\Windows Der Vorgang wurde abgeschlossen. O:\>notepad Windows 10 is installed on Datenträger 2 - the NVME. Can I somehow use the partition 2? Wiederherstellung means hereby "Recovery". If any details are missing, just let me know it. I'll add them.
  6. I don't want to use it as my boot drive. What consequences does it have? I have a Wi-Fi card next to it, but I'm not using it any longer.
  7. Hej folks, I'm thinking of buying a second NVME and I'd like to know whether my mainboard and CPU can support it. Mainboard: MSI X470 Gaming Plus CPU: AMD 3700X The mainboard seems to support PCIe 2.0x4 according to the spec sheet and according to this website (PCIe 2.0 bandwith), up to 2.000MB/sec would be possible. So the Intelp 660P would make any problems, right? Can some software or configuration issues come up with this? Can I run this drive on PCIe 2.0x4 without much of performance lost?
  8. @Fasauceome CPU 74°C and GPU 72°C were the highest temperatures after running benchmarks for 15 minutes. With a single fan located at the rear of the case, I had these temperatures: CPU 84°C and GPU 80°C. I think everything below 80°C is totally fine. @Allshevski Do you know a tool for adjusting the CPU fan speed? I can set it in the BIOS, but there are just 4 options there. I'd like to configure it in steps of 5°C. My problem has solved. I've accidentally touched the fans and the noise is gone. 2150RPM was the highest speed and the noise level is fine. I've installed the Aorus Engine software to configure the fan speeds. HWMonitor.txt
  9. Hej Ho! I have the Windforce 2060 SUPER installed and it works fine, except the fan noise. I have the 0db version, which turns off the fans in idle mode. At high workload (>90%) the fans are spinning quite fast and I hear a whiring/buzzing which is bothering me. I decided to buy a bequiet silent wings 3 140mm with 1000RPM and installed it at the side of my case blowing air in directly to the GPU. This hasn't solved my problem unfortunately. I know I can adjust the fan speed of the GPU manually, but I think this would automatically reduce its performance. What do you guys think about this? Should I decrease the fan speed and check whether it has an impact on the performance? My system: CoolerMaster HAF912 PLUS Midi Tower Fans: Front - 200mm intake Side - 140mm intake Rear (top) - 120mm exhaust Top (middle) - 120mm exhaust (my old CPU fan) Fan speeds are increasing with higher CPU temperatures. (GPU heats up the CPU of course) 3700X with stock cooler and settings are installed GPU fan speed is between 1870 and 1970 at highest. The noise starts from 1700 approximately. If you need further details, just let me know it.
  10. The BIOS was too old! I've downloaded the newest stable version of my Mainboard (https://de.msi.com/Motherboard/support/X470-GAMING-PLUS) Then format a USB stick to FAT32 and copy the file on it. Restart system, go to BIOS with delete and select flash BIOS. The system will restart and show possible USB sticks. Choose the file and go and have a coffee or tea. Never ever shut down your system during updating BIOS! Your BIOS settings will be set to default. So check RAM frequencies and boot order again. If I could solve your problem and you want to treat me a delicious coffee, feel free to write me a private message.
  11. The Windows crash report: Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 24/08/2019 15:25:21 Event ID: 41 Task Category: (63) Level: Critical Keywords: (70368744177664),(2) User: SYSTEM Computer: Admin-PC Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" /> <EventID>41</EventID> <Version>6</Version> <Level>1</Level> <Task>63</Task> <Opcode>0</Opcode> <Keywords>0x8000400000000002</Keywords> <TimeCreated SystemTime="2019-08-24T13:25:21.629806600Z" /> <EventRecordID>19719</EventRecordID> <Correlation /> <Execution ProcessID="4" ThreadID="8" /> <Channel>System</Channel> <Computer>Admin-PC</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="BugcheckCode">0</Data> <Data Name="BugcheckParameter1">0x0</Data> <Data Name="BugcheckParameter2">0x0</Data> <Data Name="BugcheckParameter3">0x0</Data> <Data Name="BugcheckParameter4">0x0</Data> <Data Name="SleepInProgress">0</Data> <Data Name="PowerButtonTimestamp">0</Data> <Data Name="BootAppStatus">0</Data> <Data Name="Checkpoint">0</Data> <Data Name="ConnectedStandbyInProgress">false</Data> <Data Name="SystemSleepTransitionsToOn">0</Data> <Data Name="CsEntryScenarioInstanceId">0</Data> <Data Name="BugcheckInfoFromEFI">false</Data> <Data Name="CheckpointStatus">0</Data> </EventData> </Event>
  12. Strange that the system only needs a few seconds booting up from energy save mode (Sleep). So my current solution is not to shut down the computer . I was really angry last time and hit the case after the system had crashed. It didn't want to boot right after the crash, but the soft impact woke up the system somehow.
  13. I've just seen that the FCLK(Fabric Clock) was higher than the Memory Clock. I've set it to the same speed and hope that this was the reason. I've also increased the speeds of the CPU and the case fans.
  14. I've just downloaded and installed the latest chipset driver for my X470 Mainboard: (https://www.amd.com/de/support/chipsets/amd-socket-am4/x470) Let's see whether it changes something or not. I've checked my SSD health with CrystalDiskInfo 8.2.3. Everything is fine except my HDD: Does someone know what this means and how to fix it?
×