Lollyly

If someone is into those stuff, I can attempt to provide a bios for modification. HP_BIOS.rar

Hi guys, I am once again here in our beloved forum to ask for help. My HP Pavilion g7-2302ev is crashing with either artifacts on the screen or just a black screen. The laptop may work for 5 min and crash or like 2 hours without a sign of any problem. I was told that the video card was the problem and it needed a new one to be replaced. A friend told me that, if I dont need the gpu, I may be able to find a custom bios, that turns off nearly completely the ATI Gpu and the laptop can still work on intel HD graphics, using the other GPU only as an assistant to make things appear on the screen. Can somebody give me a link or something for a custom bios that achieves that. I am open to experiment. Main Specs: Intel Core i7-3632QM AMD Radeon HD 7670M (1 GB DDR3 dedicated) I have 10 GB DDR3 installed ( I did that) 128GB SSD with caddy 1TB Hard drive Thanks in advance!

I have a problem with my motherboard's bios. I cannot overclock my CPU and my ram at same time. With every bios I've tried I had to choose between ram oc or CPU oc. The settings are always there, but one of them is not working. Can someone somehow point me a stable bios where I can overclock both. Third gen support isn't necessary. Thanks in advance.

After I downgraded the bios it started to work. The only thing left for me is to find the best settings. Thank you !

I can downgrade the bios but the latest bios gave me support for 3rd gen CPUs. Is there any software that I can use to downgrade the bios or I should give the PC to a repair shop to do it for me.

Can it be just a bad ram

I've seen this spec sheet but I've seen so much people do 2133 Mhz with the same CPU too.

I reseted the CMOS and its still at 1333Mhz.

My pc boots, but at 1333Mhz ram speed

I tried and it is still stuck on 1333Mhz :C

Hi everyone My Ram is rated at 1600mhz but I cant make her move away from 1333mhz. I tried with XMP profiles, raising the Clock and the multiplier, different timings with different clocks and different voltage but I cant make it to go faster than 1333Mhz. The motherboard is rated for 1800Mhz so I have to be doing something wrong. Can someone tell me where am I making a mistake. Base specs: Motherboard- Foxconn P67A-S Cpu- i5-2500k running on 4.6Ghz 4 cores Ram- 2x Samsung DDR3 1600 Ram Video card -GTX 1060 6GB Storage- 1 TB hard drive and 128 GB SSD My english is not perfect, so excuse me in advance. Thanks!