Jump to content

f2bacon

Member
  • Posts

    153
  • Joined

  • Last visited

Everything posted by f2bacon

  1. yeah but all of that is different ways of dealing with a new windows install. I've seen people just pop in a 3600x so I'm trying to figure out where my issues are coming from
  2. I'm now dying laughing at the idea of hot swapping cpu's
  3. hours of setting up individual programs. i do a lot of music and video editing with current project files. i have programs installed that i cant even think of where i could get an installer for off the top of my head. windows works fine with the 2600 so i don't think windows is the issue.
  4. 2600 took a sec, but booted fine. so i have a very very very strong feeling windows isn't the issue.
  5. That might be my biggest fear. I've had this install of windows for around 8 years. Since storm sandy. Let's see if the 2600 boots.
  6. I've tried switching back to bios 3.60 and 3.50 with no luck. I'm gonna have to switch back to my ryzen 2600 til I figure this out
  7. I googled how to install programs from safe mode, looks like chipset drivers aren't the issue. Windows installation media is about 30% done
  8. also doesnt work. im gonna try using another computer to make a disk so i can do it through a flash drive
  9. i'd much rather have picked up an asus at the time but i wanted 2 m.2 slots in b450m and that's a rarity.
  10. How could this have happened just from updating my motherboard bios and changing cpu? Shouldn't the windows installation be the same? (typed while. Downloading windows installer)
  11. New update, "your pc couldn't start properly A required device isn't connected or can't be accessed. Error code 0xc000000e" Google on my phone time
  12. No such luck, still got a spinning circle under the windows logo
  13. I had the ryen 5 2600, with the asrock b450m pro4 running 3.50 bios. I picked up a 3600x. I updated my bios to 3.60 and then 3.90 (all that's available from asrock, I didn't skip) And I can't get it to boot. I get into bios every time, it boots fine. It just gets stuck at the windows logo with the spinny loader thing. Safe mode works, I tried to install B450 chipset drivers in case that's the problem but windows installer isn't available in safe mode. I'm really pulling my hair out over this. Any ideas? Thanks for any help
  14. After all that, I think these might be it. https://amzn.to/3ew10HC individual PWM headers as well as daisy chainable. I just dont think the little one click controller is included, but I'm sure I can figure something out. I'm probably gonna order 15 and see how it goes
  15. even better! as long as it has a controller then it should be fine
  16. These are the exact thing I'm looking for. Cheapest so far, actual pwm, and an rgb controller. https://www.amazon.com/dp/B07XDYKC91/?coliid=INVRZ8FGACW52&colid=3KJ5N74KRT6X5&psc=0&ref_=lv_ov_lig_dp_it Similar to the other ezdiy, but with pwm after all. They JUST went out of stock last night as I was trying to add them to cart.
  17. i'd like to put rgb fans in both mine and my girlfriends builds. we both use the darkflash dlm21 mesh case. i have a 240mm aio in pushpull, she has a 120mm aio in pushpull. i use the asrock b450m pro4 and the motherboards rgb control stinks. my girlfriend has the gigabyte ds3h wifi so she might have better rgb options. for my setup i have 4 fans into the nzxt kraken x52 and then 3 fans at the front, and 1 at the back going into my nzxt grid fan controller. so i'd need 4 pressure fans, 4 airflow fans? my girlfriend would just need 2 pressure fans, 4 airflow fans. i'm trying to keep it on the low side, or as low as i can to achieve this. i'd like silent fans (i was close to going with the arctic p12 pwm pst co and f12 pwm pst co cause theyre cheap and seem promising, but we both want rgb) does anyone have any recommendations? i feel like im at a loss. thanks for absolutely any help
  18. It's looking like dllhost using all of my ram is this issue, I gotta do some systems checks and virus scans but it looks like the hardware isn't the current issue
  19. Just earlier today I was editing flyers on photoshop without a problem, now opening control panel brings everything to a screeching halt. I must be missing something
  20. I remember task manager being a lot more useful than this
×