-
Posts
172 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Posts posted by kidroc666
-
-
try using another manufacturer's software and see if they have a mode that suits you..
-
On 8/22/2020 at 11:24 PM, alexdpars said:
Hi there,
I don't know if anyone had the same issue with theses fans but every time I restart my PC I need to hold the button 3 seconds to make the fans sync with my motherboard which is annoying as hell for me. Is there a way around this ? If not what controller do you suggest me buying to replace this crappy controller ?
Thanks
I've had mine for two years now actually have two of there rgb/fan controllers hooked up together no problems with it syncing to my MoBo either I'm using an msi board.
-
6 hours ago, Beerzerker said:
No, some boards require that much time for it to clear fully.
Do that and provided you didn't kill anything it should start working again at least.Also make sure you power off or unplug the PSU from the wall, if it's still getting power it won't clear.
Unplug or switch off the PSU first, then remove the battery and leave it out for the suggested time.
Reinstall the battery first, then plug it back up to the wall or switch it back on in that order and start the system.No there isn't 1 or min max!!!
-
14 hours ago, kb5zue said:
Howdy,
As the title suggests, I am possibly adding the ability to offline clone hard-drives and I am looking at something like the device offered by Wavlink. Anyone have any experience with this device? If so, was it a good experience and if not good, then why? Is there something out there possibly better than this and if so, which device? If you have been using this, or a similar device, please let me know about your experiences. Cloning a hard drive is not my most favorite thing to do so I am possibly looking at something like this to make the task a little easier. Please let me know what you think.
Many thanks in advance for any help or advice that you can give. Not sure if this message went here in Storage Devices or in Peripherals so I took my best guess.
dan
I have had one for two years now i love it you can use it6 with or without a pc.. I have always used the pc with it though but it has always work flawlessly for me..
-
go into the bios and change it back to ahci find a youtube video on how to get a dell bios if you do not know how..
-
Are the fans plugged in in order like all 4 fans in line 1234 if there are more than 4 ports try putting them in order hope you can understand me..
-
The cpu needs the downward force to push the cpu in socket you probably burnt that cpu up.. never ever start up a pc without the cpu cooler on it.
-
Go to the hardware store you can get a nut that wiil get you going.
-
The threads are way different man. what you need to do is very carefully pull up on the board when you try unscrewing the screws since there the wrong thread they fit and spin your board can come loose from vibrations over time too.
-
Raise your ram voltage to 1.4 and try that you should be fine. when running 4 or more sticks is pretty hard on them too.
-
I would love to hear more if you don't mind!!
-
Has this pc ever booted while you have owned it?
-
What he is saying is they overclock themselfs and they do a damn good job at it.. The better your cooling the better it will clock and for a longer time..
-
Hows that lucky RAM clock'in these days you made to 4000mhz yet Bro!!!! JK bro sorry
-
GRizzly is the shit!! Been into pc for 26 years it's the first paste that i ever really could see a change in temp. I collect mbo cpu's from past lol. and have tested alot of paste. thermal Grizzly is all i use now for the last 5 years or so..
-
just get you will be fine!! Like you said it's a 100 system!!
-
-
I heard Rual channel is Da Bees Knee's hope you it does run in Rual channel u will have the fastest ram in the universe!!! LMAO
-
Keep HT on those old xeon still are a powerful cup just the boards are so hard to get.
-
Set your own voltages!! These new boards just throw high voltage on auto..
-
29 minutes ago, Streetguru said:
Just exchange the board if you bought it recently?
Usually you want to upgrade the bios release by release I think, they have a lot of notes on the pages.
Probably try Qflashing some even earlier bios or something on the main one.Why return it man that’s the problem with people they do something wrong to a product He’ll send it back to just do it again.. Bro go into your bios and make if you installed win with or without sec-boot enabled you have to have the bios setup like it was before you flashed it and reset it all up.. that’s why it loads with the other bios nothing wrong with your board!
-
well if you did'nt have a short you might now!!!! never ever ever put a mobo or any electronics down on a static bag they will short your device out!!
-
x58 works fine with win 10!!!
-
Windows storage works very well i have two 1TB ssd in a spanned partition for my steam library and it's over 3/4 full there has not ever been a performance hit when loading or running games go for it man..
My Gtx 1650 wont boost past idle
in Graphics Cards
Posted
Try uninstalling and reinstalling the drivers..