Ninthendo64
-
Posts
26 -
Joined
-
Last visited
Ninthendo64's Achievements
-
The Video Card Fans start spinning up but stop after a short time. I am aware that this could be intended but I'm not sure. And im still not getting any signal even after several minutes
-
yes i have an rx 570 installed Still not video output
-
I am not getting any output with gpu. Its an rx 570 powercolor 4g
-
Oh man I am so stupid but yeah i had one connected. ( I feel so stupid for forgetting right now)
-
I am building a budget PC for a relative specs are: B450M S2H 16gb 3200MHz g.skill RAM Ryzen 5 2600 PSU AZZA PSAZ-550W When I jumpstart the PC the fans start spinning but I am not getting any video output. I tried a different monitor and a different cable. I had the same issue with previous parts which is why I bought new ones in the first place what could be the problem?? (There are currently no drives connected)
-
Hey, I bought a gigabyte ga-b85m-d3h from ebay. I installed a i5 4690k and 16GB KVR16N11/8 DDR3 from Kingston. When i start the PC the fans start spinning and stop short after. This loops until I cut the power. There are no beeps from the motherboard and there is no video. Everything worked fine with the board i used before (except the gpu which is why i changed the mb in the first place). The PSU is a Lc6550 v2.2
-
Yes but when I put the jumper on clear_cmos the pc wont start at all(not even the boot loop).
-
Hey, I bought a gigabyte ga-b85m-d3h from ebay. I installed a i5 4690k and 16GB KVR16N11/8 DDR3 from Kingston. When i start the PC the fans start spinning and stop short after. This loops until I cut the power. There are no beeps from the motherboard and there is no video. Everything worked fine with the board i used before (except the gpu which is why i changed the mb in the first place). The PSU is a Lc6550 v2.2
-
Hey, I bought a gigabyte ga-b85m-d3h from ebay. I installed a i5 4690k and 16GB KVR16N11/8 DDR3 from Kingston. When i start the PC the fans start spinning and stop short after. There are no beeps from the motherboard and there is no video. I don't know what to do. Everything worked fine with the board i used before (except the gpu which is why i changed the mb in the first place). Please help. The PSU is a Lc6550 v2.2
-
Other than that I would propably go with a gtx 1650 or 1660 or something like that and a ryzen 5 3600 awesome value for money
-
You might want to wait until nvidia 3000 series launches and see what happens to prices
-
Looks like you entered the matrix, congrats.
-
ok yeah i guess i'll have to buy a new motherboard. Thanks!
-
I just looked at a haswell pin diagram. There is one bent pin i know the location of (actually the picture on my phone knows the location). According to the diagram that's an RSVD pin (if i looked correctly (also i have no idea what that means and google isn't really helpful either)). There were also other pins that were bent but they weren't that severe so I didn't take a picture. wow that is big
-
I don't have those GPU's anymore. I could try my precious 2070 though. Regarding those bent pins. My CPU speed is also fluctuating a little bit (from 3.7 GHz to 3.9 GHz) and performing below average. I never dealt with bent pins so I assumed if one doesn't make contact the whole thing probably wont work. I already searched for BIOS updates, turns out there are none.
