Jump to content

TheWhiteRose000

Member
 View Profile  See their activity

  • Posts

    36

  • Joined

  • Last visited

 Content Type 

Everything posted by TheWhiteRose000

  1. TheWhiteRose000
    Its been running stable and under load too, no BSOD really starting to think the board. It's also not really an issue unless I try to access the motherboard in which case the whole system just goes to s--te. SO! Best solution so far, don't access the bios unless I absolutely need too!
  2. TheWhiteRose000
    It came bricked stuck on error code 15, dual bios board I was able to switch to a good one and then reset the other.
  3. TheWhiteRose000
    running on the latest bios version, thing came to me bricked hoping a future one will repair it.
  4. TheWhiteRose000
    Okay, I'm having trouble narrowing down my part issue, so far I'm thinking its my motherboard despite the error codes I'm getting from my system. When I first installed everything and started my system up it wouldn't even boot and it hung on Gigabytes error code 15 (North Bridge System initialization) I was able to eventually clear the cmos and the system let me boot up with one stick of RAM in it and it finally let me use my second stick once I was able to clear the system. After I was able to get it to boot I finished my cable management, wired it all up and put my cases three fans onto the motherboards fan slots and then it had issues booting again. When I was finally able to get it to boot it reset my XMP RAM, back to 2666 mhz and it took me to the fan section. My CPU was listed as -55 degrees celcius, and it wouldn't detect the three fans I plugged in only 2; despite having 3 running. Anytime I enter the bios the system hangs after I try restarting for a considerable why and it wont let me boot up until I hard reset the system. It did list error code 00 (either motherboard or CPU) and eventually, I was able to get back into the system at which point I installed HWinfo and it lists the CPUs temps are normal despite the board sensors not registering this information. It does also take a while to post, as if the system is having issues detecting its parts properly and goes through a variety of error codes before it displays the Aorus logo. Personal thoughts is its probably the motherboard but I am going to do more testing. looking for feedback here.
  5. TheWhiteRose000
    You think long run with two elgato cards it would be better to use one for the game rendered through nvenc and the other through the CPU? Process wise do you think a 3900x would be able to handle all of that, or would it be better to just aim for a 3950x?
  6. TheWhiteRose000
    I know in terms of gaming, yea there wont be a big difference but I'm focusing more on encoding.
  7. TheWhiteRose000
    Trying to future proof, but on a tight budget. If I could find a 3950x for $580-650 on ebay I'd get that but the $470 3900x is looking more affordable.
  8. TheWhiteRose000
    The question of the hour is, what would be generally better for recording. The Ryzen 3900x or the Ryzen 3950x. Now I am aware that Nvidia has Nvenc which can yield a better encode but the problem here is the system would have 2 Elgato 4k 60 capture cards and as far as I'm aware Nvenc has issues capturing from multiple sources. It could also be noted that this could be split between the GPU's Nvenc encounter and the CPU but for practicality if a person wanted to switch between recording and streaming what would be the best option for a high quality encoding. 3900x or 3950x Software of choice here is OBS, Resolution is 1080p and FPS 60 at Placebo speed. (would it be possible to achieve Placebo speed?) So in this instance what would be the best option? For high quality editing that can encode 4K footage from two sources and scale it down to 1080p for the CPU's and would it even be possible to achieve the Placebo speed on a 3950x? Is the 3950x worth the extra bank or is it simply a wiser decision to buy a 3900x?
  9. TheWhiteRose000
    It retro-spec if I had just realized the type of memory card an 8K red camera takes, my answer would have been more obvious from the get go.
  10. TheWhiteRose000
    A while back I was reading a thing about streamers using secondary computers to handle their streaming exclusively. After much debate I've I'm going to work on just building a modern proper system instead of dumping my money into a 4790k that although a good CPU won't be able to continue to hold up to future cpus. So I got to thinking, could I use the 4790K system exclusively for a streaming pass through to unload the games I'm playing on a 12 core 3900x? Essentially taking everything I am playing from one system or the main system that's capturing console ect and camera feeds and running it through to another system using the 4790K and streaming from that computer. Would it be able to handle 4K streaming? 1080p? Would I need a powerful graphics card for that, feedback would be appreciated.
  11. TheWhiteRose000
    Generally the file sizes I deal with are anywheres between 50-200gbs after recording it really depends on how long I'm recording.
  12. TheWhiteRose000
    So in this case do you think a 1TB NVME drive would be a better choice over an SSD then archiving it in a large HDD afterwards?
  13. TheWhiteRose000
    I don't stream my net is garbage with a 3mb upload. So I focus on my strengths of editing high quality videos and uploading them later. Streaming you have a cap which ultimately lowers the quality, recording at a higher bitrate yields a better quality video.
  14. TheWhiteRose000
    I'm using an Intel 660p for all my games, the performance boost I get from it is simply amazing, 0 load times ect. But recording wise I'm trying for flawless 1080p and I generally try for a 20k bitrate, since I can't stream I focus mainly on the quality. Large file sizes which I edit later. Think it would be just better to have a large HDD or a Fast SSD in this case?
  15. TheWhiteRose000
    You think just going through a regular SSD would be a better improvement than a HDD in this case? I know for gaming NVME drives are a beast, but for capturing and encoding SSD > HDD?
  16. TheWhiteRose000
    Alright, Here is my question of the hour, is there any real world benefits to encoding, capturing, or recording to an NVME drive? I know editing wise there are benefits as it lets you have almost perfect playback so you can ensure the overall quality of the video you're editing. But I'm talking about capturing, encoding, ect like using OBS to capture footage and save it to the drive. Can anyone run some tests, does it improve the CPU performance? Is there any system performance at all for a Streamer / YouTuber / Video editor?
  17. TheWhiteRose000
    The boards several years old at this point, RMA would be costly. I was thinking the same thing, even when the Kingston RAM was involved it created the reboot loop with the system, and even on a MSI Gaming 6 board I own it didn't like having 32gbs of RAM
  18. TheWhiteRose000
    So, I finally went ahead and did my first OverClock on the z87 OC motherboard from Gigabyte and I waited until my RAM came back from RMA (third times clearly not the charm though.) Went ahead and Overclocked my 4790K to 4.8ghz based on Linus's old video where he did it and it worked, took me all day mind you as when I did it I encountered the PC would just. Hang No clear reason went through and did the age old procedure of what broke and turns out one of my 2400mhz RAM sticks from Team Group just doesn't love me anymore brand new too third RMA. But I also noticed an issue where when the board was populated in slots 3 & 4 on the Z87 OC that it would encounter issues and blue screen, even before the OC the system using my Kingston HyperX RAM Would crash and be stuck in a boot loop and the errors everyone saw would be "north bridge" related issues as it was trying to boot up again. Any idea why? At this rate I just want to chuck it up to a bad board and shake my head at the bad stick again, the stick doesn't even give error codes it just makes the system hang completely. My though process is it's the motherboard channel 3 and 4 creating issues. Then adding an overclock on top of it makes it unstable. What's everyone's take on this? I'm currently sitting at a 4.8ghz system with 16gb of RAM for gaming and editing, but can't give it another 16 due to the slot issue.
  19. TheWhiteRose000
    RAM wise?
  20. TheWhiteRose000
    Basically It would have to handle at max 2 inputs at a 4k resolution and the GPU would have to process all of it simultaneously for encoding.
  21. TheWhiteRose000
    My biggest fault would be bandwidth I think, overcoming the limitations I want to do since I'm trying for a YouTube entertainer like Markiplier sort of deal. I'm running my DSLR through the Elgato capture card and if I even handled a console game (can get consoles for cheap at Pawnshops aww yiss.) I'd need to handle bandwidth for both my camera, and the console while using the GPU to encode what its capturing.
  22. TheWhiteRose000
    I'm still in debate about my upgrade path, should I go Ryzen or should I go Intel so far Ryzen is looking more promising as with PCIe 4.0, I won't lose any of the cards functionality if I added a second Elgato 4K Capture to my system.
  23. TheWhiteRose000
    Ah, so you know what I'm getting at then the quality of work is what we're aiming for. It's true, I don't want to hold out on upgrading the system for too long but with what I'm trying for I think this would be the best case scenario at least for the time being. If I smacked a 3080ti in there the bottleneck would be HUGE in terms of loss, and even then what I'd be losing in performance just for now doesn't seem all so bad.
  24. TheWhiteRose000
    It's why I'm stalking ebay right now waiting for a cheaper 2080ti, hoping to get an OC'd Auros card it may not be a large margin but it would help encoding at 1770mhz. Essentially it boils down to what do I want to encode for me the CPU or the graphics card there are potential paths for both but I'm hoping I'm going with the right decision on the 2080ti.
  25. TheWhiteRose000
    It's why I'm hoping to optimize my system a bit more, I know if I use the cards NVenc encoder through OBS, I can free up CPU usage since the encoder works solely from the graphics card; with that I'd take less of a hit through recording on OBS then I normally would. Biggest goal is quality encoding, editing may take a while with my 4-core but I can wait I just want to make what I post on YouTube presentable to my audience.
×