Jump to content

localsmuggler

Member
  • Posts

    5
  • Joined

  • Last visited

Awards

This user doesn't have any awards

localsmuggler's Achievements

  1. Hey again, Thank you both for your input. Ivan, this motherboards bios is not something I've seen before. I'm really unsure on how to proceed, as I've seen a lot of threads where the RAM is the same as mine and the mobo is the issue and also many posts where the mobo is the same as mine, but the RAM is the issue. On topic tho, stock SOC Voltage seems to be 1.020. My question here would be - is the SOC Voltage tied with the infinity fabric? Also, I've read some posts where people have mentioned that infinity fabric couples with the RAM speed, mine being rated at 3200Mhz, the fabric should go up to 1600Mhz, so this would mean it needs more juice as well, since it's at a mere 1200Mhz right now. Honestly, right now I'd just like it to run at the rated speeds, as I've paid for that. I'll try to get it running there manually over the weekend, if nothing improves, I'll just return the sticks first thing next Monday. Also, is below 1.45V safe for the RAM sticks, I don't want to damage them having the intent to RMA them. Thank you in advance! Take care,
  2. Hey, I've got the absolute same stick issue (html file) on x570 Aorus Elite with a Ryzen 5 3600 - Keep me updated if you find anything, the closest I got to booting Windows, from all the "system exception crashes" was when I installed the newest available drivers and then set the dram v to 1.35V, have not tried with 1.4V. Will update you tomorrow when I'm home. Take care, meanwhile. Corsair CMK16GX4M2B3200C16.html
  3. Hey everyone, I've recently acquired a x570 Aorus Elite, that will be homing my Ryzen 5 3600 for a little while, I've also acquired a pair of 2x8GB Corsair 3200Mhz. The issue with all of these would be that it is not able to boot up with the XMP enabled. While, if I use the Gigabyte EasyTune feature, I can get 3200Mhz, I cannot set the timings through that app. So, the moment I go to Bios, reset everything to default to avoid conflict, enable the XMP - that's it no more loading into Windows and eventually stops posting Bios. Following that, I'll have to either use the jumper or if more severe, remove the battery so that it drains out. Specs are as follows: PSU Seasonic Focus Plus Gold 650W GPU GTX 1060 3GB MOBO x570 Aorus Elite / F10c Bios (Latest right now I guess) CPU Ryzen 5 3600 RAM Corsair LPX 3200Mhz (I'll post the detailed info in a pic) Cooling is currently stock, as I did not have the brackets to fit the water cooler from my other PC. Thank you all! P.S - I've already reached out to Gigabyte, but it might take some time for an answer. If anyone has encountered this, feel free to let me know what they've done, or if anyone knows how to resolve this, I'm willing to tweak around the Bios, just not really comfortable doing it. Should I change the RAM? Still able to RMA, was just hoping it works out as it's in the QLV. Memtest on 2133Mhz Cl15 is flawless. Corsair CMK16GX4M2B3200C16.html
  4. It's not shutting down, but also not sending signals to the monitor. VID_20190316_203933.mp4
  5. Hey, I've recently bought a gtx 1060, 2nd hand really good deal, it's working perfectly tested on 2 different pcs. Now the problem is it refuses to work on my board. The 2nd pc it was tested on has an even older mobo and the same psu as mine. I've tried ddu in safe mode (option for new gpu), resetting cmos by pulling battery out and letting it rest a bit, jumper cmos clear, power draining cpu, disabling and enabling cms, every bios combination possible (or at least ive bugged around with settings i know). A 12h ride yesterday, i've given up and looking to swap it with a rx580 see if it works better since my system is full amd, i know it doesn't make sense, but my pc doesn't like anything not amd. I've tried all pcie slots and all 3 dp, hdmi and dvi. And surprisingly all work on my friends pc. The videocard shows great results in benchmarking as well. (270x works perfectly fine in all slots) PSU - CM 600w Motherboard - AsRock 990fx Extreme 3 CPU - FX 8350 was oced now its uefi defaults after cmos resets, water cooled Old GPU - sapphire 270x 4gb oc 180w New GPU - zotac 1060 3gb amp edition 120w RAM - HyperX Fury 16gb 1600mhz Thanks in advance! Looking forward to messing with this more I'm especially curious what can be causing this.
×