Rendeaust

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.20-unRAID] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68N32N0 Serial Number: WD-WCC7K1DV8RE7 LU WWN Device Id: 5 0014ee 2baec40b3 Firmware Version: 82.00A82 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 02:25:47 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (44160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 468) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 194 183 021 - 5300 4 Start_Stop_Count -O--CK 100 100 000 - 11 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 78 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 5 193 Load_Cycle_Count -O--CK 200 200 000 - 31 194 Temperature_Celsius -O---K 112 106 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 56 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 35/38 Celsius Lifetime Min/Max Temperature: 27/44 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (421) Index Estimated Time Temperature Celsius 422 2019-03-05 18:28 40 ********************* ... ..( 12 skipped). .. ********************* 435 2019-03-05 18:41 40 ********************* 436 2019-03-05 18:42 39 ******************** ... ..( 24 skipped). .. ******************** 461 2019-03-05 19:07 39 ******************** 462 2019-03-05 19:08 38 ******************* 463 2019-03-05 19:09 ? - 464 2019-03-05 19:10 32 ************* ... ..( 2 skipped). .. ************* 467 2019-03-05 19:13 32 ************* 468 2019-03-05 19:14 33 ************** ... ..( 4 skipped). .. ************** 473 2019-03-05 19:19 33 ************** 474 2019-03-05 19:20 34 *************** ... ..( 6 skipped). .. *************** 3 2019-03-05 19:27 34 *************** 4 2019-03-05 19:28 35 **************** ... ..( 12 skipped). .. **************** 17 2019-03-05 19:41 35 **************** 18 2019-03-05 19:42 36 ***************** ... ..( 7 skipped). .. ***************** 26 2019-03-05 19:50 36 ***************** 27 2019-03-05 19:51 37 ****************** ... ..(175 skipped). .. ****************** 203 2019-03-05 22:47 37 ****************** 204 2019-03-05 22:48 36 ***************** ... ..(116 skipped). .. ***************** 321 2019-03-06 00:45 36 ***************** 322 2019-03-06 00:46 37 ****************** 323 2019-03-06 00:47 37 ****************** 324 2019-03-06 00:48 ? - 325 2019-03-06 00:49 36 ***************** 326 2019-03-06 00:50 36 ***************** 327 2019-03-06 00:51 35 **************** ... ..( 2 skipped). .. **************** 330 2019-03-06 00:54 35 **************** 331 2019-03-06 00:55 36 ***************** ... ..( 7 skipped). .. ***************** 339 2019-03-06 01:03 36 ***************** 340 2019-03-06 01:04 37 ****************** ... ..( 9 skipped). .. ****************** 350 2019-03-06 01:14 37 ****************** 351 2019-03-06 01:15 38 ******************* ... ..( 69 skipped). .. ******************* 421 2019-03-06 02:25 38 ******************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 78 --- Power-on Hours 0x01 0x018 6 15235301232 --- Logical Sectors Written 0x01 0x020 6 14077428 --- Number of Write Commands 0x01 0x028 6 15681298353 --- Logical Sectors Read 0x01 0x030 6 15769291 --- Number of Read Commands 0x01 0x038 6 280800000 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 78 --- Spindle Motor Power-on Hours 0x03 0x010 4 64 --- Head Flying Hours 0x03 0x018 4 37 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 5 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 39 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 31 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 36 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 52 --- Number of Hardware Resets 0x06 0x010 4 30 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5855 Vendor specific smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.20-unRAID] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68N32N0 Serial Number: WD-WCC7K0CKAK55 LU WWN Device Id: 5 0014ee 20f2b18ad Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 02:26:04 2019 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (31680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 338) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 178 162 021 - 6091 4 Start_Stop_Count -O--CK 100 100 000 - 854 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 3837 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 695 192 Power-Off_Retract_Count -O--CK 200 200 000 - 43 193 Load_Cycle_Count -O--CK 199 199 000 - 4468 194 Temperature_Celsius -O---K 114 101 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 195 000 - 20 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 56 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 04 d3 3a 40 00 Error: UNC at LBA = 0x0004d33a = 316218 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 d8 00 00 00 04 d3 00 40 00 03:07:13.158 READ FPDMA QUEUED 60 00 80 00 d0 00 00 00 04 d2 80 40 00 03:07:12.756 READ FPDMA QUEUED 60 00 80 00 c8 00 00 00 04 d2 00 40 00 03:07:12.253 READ FPDMA QUEUED 60 00 80 00 c0 00 00 00 04 d1 80 40 00 03:07:11.851 READ FPDMA QUEUED 60 00 80 00 b8 00 00 00 04 d1 00 40 00 03:07:11.248 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3836 - # 2 Short offline Completed without error 00% 3833 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 31/36 Celsius Lifetime Min/Max Temperature: 26/49 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (343) Index Estimated Time Temperature Celsius 344 2019-03-05 18:29 32 ************* ... ..( 49 skipped). .. ************* 394 2019-03-05 19:19 32 ************* 395 2019-03-05 19:20 ? - 396 2019-03-05 19:21 32 ************* 397 2019-03-05 19:22 31 ************ 398 2019-03-05 19:23 32 ************* ... ..( 2 skipped). .. ************* 401 2019-03-05 19:26 32 ************* 402 2019-03-05 19:27 33 ************** ... ..( 2 skipped). .. ************** 405 2019-03-05 19:30 33 ************** 406 2019-03-05 19:31 34 *************** ... ..( 8 skipped). .. *************** 415 2019-03-05 19:40 34 *************** 416 2019-03-05 19:41 35 **************** ... ..( 14 skipped). .. **************** 431 2019-03-05 19:56 35 **************** 432 2019-03-05 19:57 36 ***************** ... ..( 60 skipped). .. ***************** 15 2019-03-05 20:58 36 ***************** 16 2019-03-05 20:59 41 ********************** ... ..( 13 skipped). .. ********************** 30 2019-03-05 21:13 41 ********************** 31 2019-03-05 21:14 40 ********************* ... ..( 8 skipped). .. ********************* 40 2019-03-05 21:23 40 ********************* 41 2019-03-05 21:24 39 ******************** ... ..( 2 skipped). .. ******************** 44 2019-03-05 21:27 39 ******************** 45 2019-03-05 21:28 38 ******************* ... ..( 4 skipped). .. ******************* 50 2019-03-05 21:33 38 ******************* 51 2019-03-05 21:34 37 ****************** ... ..( 15 skipped). .. ****************** 67 2019-03-05 21:50 37 ****************** 68 2019-03-05 21:51 36 ***************** ... ..( 57 skipped). .. ***************** 126 2019-03-05 22:49 36 ***************** 127 2019-03-05 22:50 35 **************** ... ..( 68 skipped). .. **************** 196 2019-03-05 23:59 35 **************** 197 2019-03-06 00:00 34 *************** ... ..( 12 skipped). .. *************** 210 2019-03-06 00:13 34 *************** 211 2019-03-06 00:14 ? - 212 2019-03-06 00:15 32 ************* 213 2019-03-06 00:16 31 ************ ... ..( 5 skipped). .. ************ 219 2019-03-06 00:22 31 ************ 220 2019-03-06 00:23 32 ************* ... ..(122 skipped). .. ************* 343 2019-03-06 02:26 32 ************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 695 --- Lifetime Power-On Resets 0x01 0x010 4 3837 --- Power-on Hours 0x01 0x018 6 26682383198 --- Logical Sectors Written 0x01 0x020 6 75866570 --- Number of Write Commands 0x01 0x028 6 32159901368 --- Logical Sectors Read 0x01 0x030 6 93677882 --- Number of Read Commands 0x01 0x038 6 928298112 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 3817 --- Spindle Motor Power-on Hours 0x03 0x010 4 2214 --- Head Flying Hours 0x03 0x018 4 4512 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 43 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 211842 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x010 1 36 --- Average Short Term Temperature 0x05 0x018 1 37 --- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 29 --- Lowest Temperature 0x05 0x030 1 45 --- Highest Average Short Term Temperature 0x05 0x038 1 35 --- Lowest Average Short Term Temperature 0x05 0x040 1 40 --- Highest Average Long Term Temperature 0x05 0x048 1 37 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 97939 --- Number of Hardware Resets 0x06 0x010 4 1265 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5872 Vendor specific

Parity drive - redstone-nas-smart-20190306-0225.zip Drive that failed out of nowhere - redstone-nas-smart-20190306-0225-2.zip

Hello everyone. I'm new to unraid and I need help. Me saying that I'm not doing great so far will be a gross understatement. This all started this weekend when I decided that I want to move to unraid. Had some issues here and there, but I've overcame them all so far. Until today. Last night, I've set schedules for the first time (Mover, SSD Trim, etc.) including parity checks. It ran parity check for the 3rd time (twice when I first setup the array 3 days ago). It started the parity check schedule this morning like I told it so, and it have found hundreds of thousands of errors. \ At first, I thought this was normal because I just moved all of my files to it and maybe it needs to recalculate or something. Did some research and I was wrong big time. I've let the parity check to finish, stopped the array and shutdown the server. Unsure and panicking at this point, I've replaced SATA cables and made sure everything is connected properly. Started the server, unassigned the parity drive from the array and ran preclear and left the machine (yes, all of my drives were precleared before). 4 hours later, I logged in and an hour earlier, one of the other drives in the system started erroring out. That drive has now total of 0 bytes of data partitions on it. I was forced to end the preclear prematurely. I can't leave the server running with logs spamming me about that drive every single second. I've restarted the system again, opened BIOS and the drive isn't being detected anymore. I don't know what happened, the machine is 100% stationary, the drive in question has a fan right in front of it and the drive was idle. Array isn't started while I was doing the preclear. I swapped out the cable. It is being detected again. Please note that never, not even once, have this happened before when this drive was connected to a Windows PC. 90% of my data is in this drive. I can't afford to loose this drive whilst my parity isn't 100% reliable at this very moment. I'm actually not sure what to do at this point. I'm running parity check again. Just to make sure there isn't any errors anymore and maybe I'll run preclear on the parity drive one more time. All of the decisions I'm making on my own has been biting me back so far and I'm starting to loose hope. Do you have any suggestions? Thanks to everyone who is willing to help.