flyguy3

Update*1

Currently i have a 4.3ghz OC on my 6800k. This is just a wild number i decided to enter in from what ive seen from other people. Can someone Explain to me what Vcore is and What VID is? In addition, i am running 30 minutes of AIDA 64 each time before reducing VCORE by .02V is this a good idea? LLC is set to Level 2. Also, should I try to push my CPU farther? Ive gotten it up to 4.4ghz at 1.39V but it crashed at the 2 hour mark on my final AIDA 64 run.

Understood, I found a nice image on the googles. Thank you Moderator God for the brainstorm.

i could remove the hard drive bay, but even with a 360 alone is it enough for a 6850+1080? And when I get another 1080 slap on the 120 in the back?

Okay, I have an 6850k and a 1080 with a second one possibly in the future. I am in a dilemma right now. It seems this case only supports 240/280 rad in the front. I am wondering if that is enough cooling for those my rig. Also as seen in the picture I have a 120 in the back, but i have no idea how large a 120 rad is as there seems to be a tight fit for the fan and my motherboard currently. it would helpful for insight or other approaches to water cooling.

Well I'm a monkey, my first cable was defected. My newer cable only supported 85hz. So there's that. Thanks for helping my stupidity. Tifu

Well, i just revert back to the old cable. And i pushed it up to 144hz but once again the flickering came back. So i have no idea whats wrong. Either i got cucked by both cable or somethings up

Well, slowly inching up the monitor Hz only goes up to 85Hz and anything past it just puts the monitor into deep sleep mode.

I do not have a spare GPU. I don't believe it is the GPU that is being finicky, though. I have my side monitor running flawlessly. It can do everything, i just understand why it wont do it..

Going into Display Adapter Properties and setting the monitor to 144hz completely blanks out the monitor. However. the monitor is no accepting that 2560x1440 is a valid resolution.

Yes, i did. However when i do that the display goes black. And starts cycling though Power Saving Mode. I have went into the monitor manually and disabled Deep Sleep Mode. However it does not seem to do anything. I try to revert the monitor back to !080p and it works flawlessly

I currently have no idea what's wrong. So my Dell 2716dg was working fine until I unplugged everything and cleaned up my desk area. Backtrack a few day, I assumed the DP cable was broken because ONE of my monitors was flickering. I proceed to buy a new DP cable. Now with the New DP cable, my display is running a super weird resolution of 720x576@ 50hz. I do not believe this is a problem with my GPU as when I switch the monitor from DP to HDMI the monitor works flawlessly (Though locked at 60hz) I am all ears to hear suggestions.

I have a Dell 2716dg (AO3), and it is blinking randomly at times. I don't know if this is an issue with my GPU or my DP cable. I have two monitors, but only one of them blinks. I think it's a cable issue but I came here for other suggestion. Never happened until i decided to unplug everything and to reorganize my desk.

I mean, i would but it only goes up to 60hz and also the resolution is limited in windowsq to 1386x788