Elysimo

So I have bought Mk11 and yes it's no surprise that there's been plenty of issues with it on launch. My issue is odd to say the least. So when I launch the game I notice that the controls keep flickering between xbox and pc controls even when my xbox controller is disconnected.Whenever I try move to the left or up in the menus there seems to be a delay or it feels like its not registering the inputs every time. I then go in a game and my character keeps jumping and the game ends up crashing. I really am at my wits end and idk what to do I have contacted WB support but I can imagine they are extremely busy atm so the reply is going to take ages. If anyone has any suggestions please say it would greatly appreciated. Below are the things I have tried myself. 1. I have completely reinstalled the game and reset the data for it on my pc. 2. I have tried using just mouse and keyboard the problem still persists. 3. I have updated my drivers and Windows 10 and checked my direct x version which is 12. 4. I have tried big picture mode in steam. 5. I have checked the integrity of the game files on steam. 6. Used MSI Afterburner to check usage and it is fine. 7.Tried another game with and without my controllers they work fine so the issue is solely with mk11.

So I currently have a cheap 24 inch 60hz monitor and a decent pc, nothing amazing (specs Listed below) I am now wanting to get a second monitor and im thinking of getting a more expensive 24 inch 144hz monitor. if i was to get a 2nd monitor I would need to dual mount them vertically, I am not sure as to what I need to do this I know I will need a dual monitor stand/mount but when I look at these on amazon they show mounts on the back of the monitors as well but I don't have one of these, do I need to buy some and drill them in to the back of the monitors? I am worried I will break my monitors. Also with a 144hz monitor do you need consistent 144fps? I am thinking of upgrading to a gtx 1070 as well as adding another 8gb of RAM. I will list my current monitor and the monitor I am thinking of getting any insight is greatly appreciated. if you have any suggestions for a good 144hz monitor around the £200 mark that would be helpful too. CAS: Cooler Master Masterbox MB500 Mid-Tower RGB Gaming Case w/Tempered Glass Window AND 3x RGB Fans [+17]CPU: Intel(R) Core™ i5-8400 - 6-Core 2.80GHz, 4.00GHz Turbo - 9MBCache + UHD Graphics [+67]MEMORY: 8GB (1x8GB) DDR4/2400mhz Dual Channel Memory (CorsairVengeance LPX w/Heat Spreader)MOTHERBOARD: Asus H310M-K: M-ATX w/ 2 RAM Slots, USB 3.1, SATA3POWERSUPPLY: Cooler Master MasterWatt Lite 400W 80+ Power SupplySSD: 240GB Kingston SSDNow A400 SATA III Gaming MLC Solid State Disk[+35] (1 Drive)VIDEO: MSI GeForce(R) GTX 1050 Ti 4GB - DX12(R), HDMI, DVI, DP - 3Monitor Support (Single Card) Current Monitor: https://www.amazon.co.uk/Dell-SE2417HG-Anti-Glare-LED-backlit-Response/dp/B06Y1R7NKR/ref=sr_1_2_sspa?crid=3FFF2Q65FBD77&keywords=dell+monitor&qid=1554033528&s=electronics&sprefix=dell+%2Celectronics%2C145&sr=1-2-spons&psc=1 Potential 2nd monitor: https://www.amazon.co.uk/ASUS-VG248QE-Widescreen-Multimedia-80000000/dp/B00B19T7QC/ref=sr_1_6?crid=2XEQKPA18P679&keywords=asus+monitor&qid=1554033572&s=electronics&sprefix=asus+m%2Celectronics%2C140&sr=1-6 Monitor Mount https://www.amazon.co.uk/Duronic-DM35V2X1-Vertical-Monitor-Warranty/dp/B00P1802RW/ref=sr_1_3?crid=1A7NHKS95G53G&keywords=vertical+dual+monitor+stand&qid=1554033729&s=electronics&sprefix=vertical+dual%2Celectronics%2C136&sr=1-3

In heinsight I should have used usb but I have now bought that 3.5mm cable as well as an extension cable so I am just going to have to deal with unfortunately thanks for the help everyone greatly appreciated.

thanks for the help but it didn't work

it has hdmi,optical and usb

No doesn't show up separate just shows up as speakers and shows in the picture it is using both the audio jacks for the same output.

well if I change the speaker configuration to 7.1 it changes to my sound bar

it only does it for input devices I need output

@KING OF THE DIRTY DANS doesn't work the sound bar and my headset aren't recognised as separate audio devices

yes

I have had the regular Hyper X Revolver for 3 years almost now and it is a very nice headset. When first looking at the hyper x revolver it looks extremely heavy but it is actually pretty light, it also has the self adjusting head band which I love it just fits around your head perfectly and is extremely comfty. The only reason I would go for the Alphas is the design and your personal preference I think they are on par comfort and performance wise.

So I recently setup a sound bar with my pc but I am having issues switching between the soundbar and my headset, If I want the sound to come out of my sound bar I need to taker my headphones out. I am using a Hyper X revolver which uses a 3.5mm audio jack and I think this is what is causing the issue because I am also using a 3.5mm audio jack for the sound bar. I searched this up online and nothing seems to help and I think the only fix would be to somehow get windows 10 to recognise the two audio jacks as separate devices but I am not sure on how to do this. If anyone has any suggestiions it would be greatly appreciated.

Just did the test and apparently I'm on 12 Mbps download and 3 Mbps upload which isn't what I should be getting. Although I am doing an update atm

I have tried all sorts of bit rates from 200 to 5000, I rescale to 1280x720 and the stuttering only happens on the twitch stream and I do drop frames in game.

Do you use obs? If so what gpu and cpu do you use?