Jump to content

SeeEmAge

Member
  • Posts

    4
  • Joined

  • Last visited

Awards

This user doesn't have any awards

SeeEmAge's Achievements

  1. So, I installed the ITX board and the RTX 4070 in my ThermalTake The Tower 900... a bit overkill vor ITX... I ran the test for an half hour. The GPU itself stays at 75c° and the hotspot is at 95c° I a bit lower but it sorrows me still...
  2. Thank you for your answer. With 80c° is no wonder, as the case is for itx and airflow is really restricted. Anyways it doesn't get hotter. Oh and the ambient temperature is around 26-30c° in my room. Its really hot here at the moment...
  3. Hello! So I got my RTX 4070 today and it works flawlessly! It's a 4070 GAMING 12G from Gigabyte. Now I wanted to look if my case is limiting the card in temperature. I have ThermalTakes The Tower 100. I started AIda64 and FurMark. The GPU stays at. 78-80c° The clocks are at 2400MHz and the memory chips are 70c° hot. Now the Hotspot temp worries me. Nearly at start until 30 minutes it stays at 98-102c°. This sounds really hot and I am worried that it will hurt the card. Is this something I can ignore, or should I do something?
  4. Hello! First I have to say that my English is not the best... My specs: CPU: BEFORE Ryzen 5 1600, NEW Ryzen 7 2700X Mainboard: MSI X370 GAMING PRO CARBON GPU: ASUS Strix RTX 2080 RAM: 16GB HyperX Etc. : Soundcard: SoundBlaster X AE-5 First thing. I had the Ryzen 1600 until yesterday. It worked fine but sometimes the LEDs of my Mainboard didn't start to shine and this was the indicator for me, that the PC won't post. After some restarts it starts to work again and then the problem comes back later than 1 month. Since yesterday I have the Ryzen 2700X and it worked really well. I didn't flashed the Bios (It was from April 2018). But since today it makes the same problems like the 1600... But now it done this after every restart and this only 3 times... now it stays in not posting. I changed the 2700X with the 1600 and it posted. So I flashed the Bios to January 2019. I swiped the CPU and it doesn't changed anything. Back to the 1600 It won't post too. I am working on since 4 hours and now I am clueless. Edit: I have to say that I have a water-cooling since today. I hope someone can tell me a tip. :) Thank you!
×