Backstretch

this doesnt answer any of my questions.

Long story short im upgrading my mass storage from 1tb HDD to 2tb SSD. What i want to do is make my new SSD into my single point mass storage and turn the old 1tb HDD into a backup of important files. my problem is the goddamn file paths. is it even possible to move everything onto the new drive and not run into drive letters or file path problems??? i tried renaming the new drive to the old drive's letter which you would think would trick the computer into choosing files from the new drive but nope file paths not found. im at my wits end i dont understand why this is so difficult. i even bought acronis 2020 for backup and drive cloning and it wont let me clone the goddamn drive. im very frustrated and i dont have much experience in this space so any and all help is appreciated. thank you for your time

will setting the command rate to 2T allow me to clock my RAM to 3200mhz?

Here is what you guys asked for. the voltage is set to auto in BIOS, and is ALWAYS sitting at 1.36V. Basically everything of consequence is set to AUTO in BIOS. except the memory frequency of course. the XMP profile only goes to 2933 even though it's a 3000mhz kit. everything outside of that is bone stock for memory.

Okay so essentially i scaled the RAM back from 3200 mhz to 3000 mhz (the modules rated speed w/ XMP, but i manually set the speed to 3000mhz, i did not enable XMP). I probably should've done this first before bugging you but that OC worked for months without a hitch. It's just now giving me problems. Anyway after scaling back the RAM i ran the test and got zero errors. Why did it just now decide to start screwing with me? I have G skill TridentZ with Samsung B-die, why can i not OC it stable a mere 200mhz? Should i run the test again? Maybe the first test was an outlier? Maybe this test was? I am so out of my knowledge pool here. Thank you for your help again.

I've only run the test once, because as you can see it took over 3 hours to complete. I will try to scale my RAM back, and see if i still get the errors. will report back with my findings.

Hey guys. I'm way out of my league here. Long story short my games (BF5, Apex, etc.) would artifact, crash, give me a BSOD, black screen my computer (no display out), hard lock it, the works. I RMA my GPU and the new card has the exact same problems. So now i'm thinking it's not the card. The latest BSOD i got was memory management, so i went ahead and ran MemTest86 and here are my results. As you can see there are errors. I don't know if they're the source of my issues but an error is an error. I just don't know what they mean. Any help would be awesome. Here is a link to my build. https://pcpartpicker.com/list/99sqFt Again thank you for any help. Really trying to solve this issue. It's super frustrating.

reinstalling adrenalin is easy enough but how do i reinstall directx?

i can absolutely do this but it'll take a full day to test, and i kinda don't want to see if it'll work, since according to AMD my rated boost is 4.1, and only getting 3.9 would piss me off.

Recently my games have been crashing. Battlefield 5, COD4, and now Apex Legends. Being as how it's across multiple games i figured it wasn't their fault. I'm really at a loss here. I don't know what else to do as my trouble shooting experience isn't really seasoned. The games crash after an hour or more of playing, and i'm checking HWinfo after they crash for the numbers. Zero thermal throttling on anything. The games freeze, crash, and send me back to the desktop packing. Most of the time there's no reason or popup given,sometimes there is (see pics). Please let me know what to try. This problem is getting annoying. OS -Windows 10 64 bit only Windows 10 ever on the system, not activated cause fuck that. Most of the hardware was bought in November. Upgraded the CPU within the last 2 weeks. I have re-installed the OS one time, because enmotus royally screwed my StoreMI and corrupted my single bootable drive, so I had to start over. Don't use the service anymore. CPU - Ryzen 5 2600X OC to 4.2ghz@1.45v cooled by Corsair H110i. I have never seen anything higher than 72C on it. And that was after hours of small data sets with OCCT. It never gets above 60C when gaming. GPU - Powercolor RX580 Red Devil golden sample running at stock. Never gets above 75C when gaming due to my fan profile. On Adrenalin 19.2.1. Mobo - Msi B450M Mortar on BIOS 1.2. PSU - Corsair CX650M. RAM - G Skill TridentZ RGB 16gb @3000mhz Storage - Kingston 240gb Ssd (boot) and WD 1tb for games. Case - Fractal Design Meshify C.

Yes i just ran cinebench and was pegged at just under 4.1ghz. 1.41V across the board. So what youre saying is PBO2 and the voltages/ clocks its pushing arent going to hurt anything?

Thank you for the recommendation. Now i get to learn a new monitoring program lol. I tried looking for it and I don't think i have it. I'm also on the latest BIOS. But MSI has been known to have generally crap BIOS compared to other brands. 1.5V to the CPU isn't gonna hurt anything??

Problem is if i manually overclock i can't seem to peg 4.1 or 4.2 ghz stable without going between 1.4 and 1.45 V.... I really don't want to fry this chip. I can clearly cool the processor, so i'm not gonna TJ Max anytime soon, but will pushing that much voltage long term into this thing destroy it? I use my computer everyday just to surf the web and play video games.

Edit : I'm cooling the processor with a Corsair H110i AIO. after a 7 hour session with OCCT small data sets, it never got above 69 Degrees, so thermals are not a problem. Also, these numbers are from surfing Youtube, not gaming.

Just got my 2600x in last week, i'm very pleased with the performance gain coming from a 2400g. However. This feature is losing it's goddamn mind pushing these numbers (see picture). I can overclock decently, i know how to, but I bought the X version because i didn't want to. I know the basics of PBO and XFR and to expect some higher than normal numbers, but jesus christ this is ridiculous. Kind of at an impasse here. I don't want to manually overclock cause i would have wasted my money, but i fear for my processor's poor life right now. Any suggestions? Ryzen 5 2600X Msi B450M Mortar Powercolor RX 580 G skill TridentZ 16gb 3000mhz Kingston SSD