Kitsan

Oof that spreadsheet is nice! This case looks perfect from that list but I can't seem to find it available: https://www.jonsplus.com/products/i100pro-sg.html Has anyone seen this for sale anywhere? (I've emailed them to ask)

Im trying to find the smallest case that will fit an MSI RTX 3080 Suprim X - 336 x 140 x 61 mm, I did want a smaller GPU but im just happy to even have a 3080! So far i've found the Kolink Citadel Mesh and Lian Li O11 Dynamic Mini, I don't mind the Kolink but would prefer something a bit more premium and although the Lian Li is more premium... it's full ATX sized. Anything else to consider?

I need to get a couple of HDD for video editing mass storage, I've read quite a few reviews and the 12TB Seagate Ironwolf looks pretty good but I haven't looked at HDD in such a long time that i'm not sure what's good at the moment. Is there anything else I should look at other than the Iron wolf in the 8-12TB range?

Sometimes power related issues can be as simple as the PSU CPU/24PIN/PCI-E...etc cables are not seated correctly, also double check the RAM while you do this. Does it restart if you run a CPU benchmark like cinebench r20, if it doesnt then you can eliminate CPU from the issues. Try running 3dmark and if it doesnt restart you know its driver/software based issue. Another common one is an overtightened heatsink or aio block on the cpu, however that usually means the PC doesnt turn on at all.

The family PC has a problem, the PC sometimes boots up as though it has no drivers installed... so when you go to resolution it will only go as high as 1080p but if you restart, it will 99% of the time boot at 4K? I've tried DDU clean install, redownloading drivers and reinstalling windows with a fresh download but it keeps happening? It's also inconsistant as sometimes it can go a week without issue, i'm going to try replacing the GPU and PSU next but I was wondering if anyone knew what the problem was?

Resolved! Thanks Jurrunio

Yeah bclk or base clock, so even though cpu z states that it's not 1:1 it is coupled? That's confusing Do you know if there is there anywhere which has a good settings list for this motherboard as im not finding it as easy to work with as my Asus Gene?

Also tried using Ryzen Master, it states its coupled in the app but it's still not matched because of the blck issue!

I'm trying to get my 3900XT setup but I can't get the FSB:RAM to sync at 1:1 because the blck is defaulting to 100.26 even when I set the "CPU Clock Control" to 100? Also I don't really understand the VDDG voltage settings, it states 700 when I go to adjust... does that mean 0.7v? If anyone has a cheat sheet for b-die that'd be great!?

I have the same problem with a 2700 (non X), PBO doesnt work on the B550 so I just did an all core OC to 4.1

I like the P600S for sure Pro 2 is a bit too massive I think this might be the winner! Only drawback is that it's the most expensive (not by too much though) I still like the Silent Base 601/801 especially as i've realised that I can remove the front centre panel easily... Thanks for the suggestions!

Pure base 500 could work but front looks restrictive, not sure I want to cut holes in it unless I have to... Silent base 601/801 with solid panel looks good though, could probably brute force enough airflow

It doesnt have a solid side panel, it's got glass?

The only airflow orientated case I can think of with solid panels is the Fractal Design S2 Meshify: Are there any other good ones? (Can be ATX or MATX)

I'm thinking about getting a nice chair because my current one (Pretty cheap) is worn out... however with Covid, it's hard to actually visit a place and sit in some... so i'm going to roll the dice. I like the Humanscale Freedom Hi Back but I was wondering if anyone had any postive/negative experiences and/or suggestions on a good seat?

I'm completely new to Ryzen, I have been trying to find the infinity fabric setting in the bios but I cant see it listed in the manual or by going through the menus? Is it just a 3000 series option or have I just missed it?

Im coming from 240hz and I definately dont mind TN panels as I play allot of esports titles, that said I do much prefer the image of my 4K IPS. Infact the only thing thats stopping me pulling the trigger right now is the 120hz spec.... although I think im going to give it a shot.

Thanks for the really informative reply! I guess the main reason for me moving to ultra-wide is that i'm going back to uni to study an MBA and an ultrawide will take up less space than my 32" IPS 4K 60hz and 25" TN 1080p 240hz while still being able to support two or three windows to run different programs/compare documents and webpages and play games/esports titles in my down time I'm a little nervous about making the transition because I fully appreciate your points about going back to 16:9 and it's the reason why I never adopted it... however I feel like the productivity element of it for what i'll be using it for is very useful. Really appreciate your throughts though

A friend of mine is selling his AW3418DW 34" and im debating on whether to buy it, has technolegy moved on allot in the last 3 years? The other monitor I was thinking of buying (new) was the AOC CU34G2X but it's not IPS, doesnt have native G-sync and it's not on the Nivida list of approved monitors (although I know allot of unsupported monitors do work), however it is 144hz. Has anyone got real experience of 120hz vs 144hz? For ultrawide owners, is there any advice from ownership, like Is VA a good experience Wished you'd gotten a higher refresh ...etc

What cooler are you running? Bear in mind mines direct die cooled with liquid metal to get 5ghz 80C in P95, whats your AVX offset as you probably wont get 5ghz in p95 without a custom loop?

LLC is on and it stays at 1.24-1.28v VCORE even when its set on manual not adaptive.

Well mine seems much happier now, while running at 5.1ghz I couldnt change the cache ratio past 45x and now it's happy at 50x. I think it was running at 1.24-1.28v VCORE this whole time.

Agree on the p95, i've noticed that allot of people on this forum don't read questions (this is not aimed at you). debaurs manual 5ghz 24/7 is a preset in the bios, you can select it and it automatically configures the BIOS