Jump to content

ddennis002

Member
  • Posts

    1,086
  • Joined

  • Last visited

Reputation Activity

  1. Like
    ddennis002 got a reaction from TubbyTubb in Replacement Part   
    You can try posting here as well.
    https://linustechtips.com/forum/89-classifieds/
  2. Like
    ddennis002 got a reaction from TubbyTubb in Replacement Part   
    No problem, I had to order a whole set before for a XSPC block, i lost one while rebuilding years ago. That was a few blocks ago though lol.
  3. Agree
    ddennis002 reacted to RONOTHAN## in What is this   
    Looks like a KVM. Not sure the exact model, but they're pretty common and not super expensive. They're used to switch all peripherals and monitor over from one PC to the other with the flick of a switch.
  4. Like
    ddennis002 reacted to TubbyTubb in Replacement Part   
    Thanks for the reply. Ouch 16 dollars for a single spring that's gonna hurt my feelings LMAO. Maybe someone on here has one they'd be willing to part with. I'll wait and see before I order one of them, thanks again.
     
    THOMAS
  5. Like
    ddennis002 got a reaction from TubbyTubb in Replacement Part   
    EK sell replacement.
     
    https://www.ekwb.com/shop/ek-quantum-velocity-precisemount-black
  6. Agree
    ddennis002 reacted to 191x7 in Ryzen 7 2700X crashes on at 3200MHz RAM   
    Upgrade from the Zen+ and you'll be able to run 3200+. Zen+ is known to have a memory controller that's barely able to do 2933MHz properly.
  7. Agree
    ddennis002 reacted to 191x7 in Any changes that I should make?   
    Going with an i3 12100F and pairing it with DDR5 makes no sense, even if you're thinking on upgrading to the 13th series when it arrives.
    I'd recommend going with a stronger CPU but a cheaper motherboard and regular DDR4 RAM. The CPU performance jump is far more noticeable than a small jump the DDR5 RAM gives.
  8. Like
    ddennis002 got a reaction from Lurick in How much internet do you use in a month   
    yea, on 2Gig fiber symetrical here.
  9. Agree
    ddennis002 reacted to Oshino Shinobu in Ordered this budget EVGA 750w power supply off Amazon and the box looks extremely sketchy.   
    Looks fine. Matches EVGA's pictures on their site.
     
    The reason you don't see any 80+ stickers is because it isn't 80+ rated.
     
    https://www.evga.com/Products/Product.aspx?pn=100-N1-0750-L1
  10. Agree
    ddennis002 got a reaction from kirashi in Brand new Intel wifi 6 ax booster?   
    @Falcon1986gave some good advice in his post.
     
    To follow up after looking at the spec for the router and wireless card. I would imagine you are on the tail end of the 160Mhz that the RX1000 can do. The reason why your why your old adapter is pulling better speed is because it is locking on at 80Mhz which brings a stronger signal = higher speed.
     
    Things you can to improve your speed on the ax201 is go into the advanced setting and force it to 80Mhz this should get you up closer to the asus adapter. 
    Make sure the AP is as high up as possible. Make sure the antenna's on the RX1000 are installed correctly this matters on this router.
    In the router UI make sure QOS is turned off QOS is not needed when you have a connection for only a few people of 200Mbps or higher.
    Also in Wireless Setup Turn off OFDMA in 5Ghz this will help imrpove bandwidth.
    Make sure that the 5Ghz channel you are on is not conjested in your area around the client or the router. 
    High gain directional antenna on the ax201 side will result in better speed, it will provide a stronger signal to and from.   
  11. Agree
    ddennis002 got a reaction from kirashi in Brand new Intel wifi 6 ax booster?   
    There is more than one way to go about it just depends need little more info. Model of AX router would help as well.
    What motherboard do you have? You could probably attach 3-6ft sma cables and get some higher gain antennas.
    Is running hardwire out of the question?
  12. Like
    ddennis002 reacted to YGFJoao in RGB Fans   
    I'm getting a kraken z73, but those definitely look interesting.I'll make sure to check them out thank you
  13. Like
    ddennis002 got a reaction from YGFJoao in RGB Fans   
    Which AIO are you getting?
    To try to stay under budget and give you the best band for your buck. Look at these.
    3 pack comes with the lighting node core, so the RGB would plug into the 6 port controller and you plug that into sata power and usb header on the mobo and can control the RGB from corsair iCue. PWM for the fan would be from your Motherboard.
    https://www.newegg.com/corsair-co-9050094-ww-case-fan/p/N82E16835181182
     
    If you want Fan control and RGB control in the same place you can opt for a Corsair Commander Core XT to replace the included Lighting Node Core with the fans.
    The Commander Core XT will give you 6 RGB and 6 Fan headers and allow you to route all the cables to one area and control both fan profile and rgb from the iCue software.
    iCue also has alot of built-in add ons that will control Motherboard RGB and any RGB connected to 12v or 5v Addressable RGB as well.
     
    I love iCue all my RGB is Corsair and controlled in the iCue software. Mouse, keyboard, waterblock, fans, mouse pad, rgb light strips. My next upgrade is to go for one of Corsair iCue PSU and Corsair Hydro X Pump/Res Combo. All of which can be controlled though iCue.
  14. Like
    ddennis002 got a reaction from YGFJoao in RGB Fans   
    What kind of budget are you looking at for fans, rgb and all?
    Some fan need controllers which may or may not come with the fans. Some don't need controllers at all. Really depends.
    I personally have 6 Corsair LL120 White. With a Commander Pro which is the fan hub and RGB controller. All except the fans came with the case which is a Corsair Obsidian 500D.
    I swapped the 3 black LL120 that came with the case for 2 reasons. I was going for a Black and White theme, and I have a 360mm and 240mm Radiators. The White LL120's go up to 2400rpm vs the 1500rpm on the black and offer twice the static pressure for my radiators.
  15. Like
    ddennis002 got a reaction from zacandneil in Can't Run 4 Sticks of Ram   
    why do you think you would need to raise DRAM voltage when OP is currently trying to run out of the box speed and timings? Increasing DRAM voltage won't help at all the only time you need to raise DRAM voltage is running memory at higher speed or tighter timings. DRAM voltage has nothing to do with how the memory communicates with the IMC.
     
    OP most likely problem is signal integrety between IMC and Memroy try raising VTTDDR Voltage to 0.75v. Also in the memory timing page set Memory Gear Down Mode to Enabled. 
     
    Also do you know how to check to see if you have single or dual ranked memory? This is important and if running dual rank 3600Mhz is about the limit for it. 
  16. Like
    ddennis002 got a reaction from Mark Kaine in Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***   
    @Dean.P.  @Zelenia @Kenpachi1985 @MrBill01 @darkknight302 @Livin @DonGuano @GreyestGoat @ry_ry @super_teabag @FraktalU @vf1000ride @Kira0666 @Trentonxx @agent_x007 @X-System @soldier_ph  @Real_PhillBert 
     
    I have updated the Superpostion Scoreboard. 
    I do not have access to the Valley Benchmark unfortunately. 
  17. Like
    ddennis002 reacted to Lokki Deathwish in Ltt Store Female clothing.   
    Sorry if this already been brought up multiple times. But I am a long time LTT fangirl and would really like to buy a T-shirt to rep my inner nerd. I know the female audience is a small percentage of the viewers, but to offer absolutely nothing is very disappointing. I've been waiting quite sometime now  and would really like to see at least one female shirt next year. I know this probably going to get buried and never seen but I wanted to remind you that you still have a female audience.  

    Thank you for taking your time to read this  

    p.s. If I am a idiot and you actually did have female shirts and i just missed it. I am sorry. 
  18. Like
    ddennis002 reacted to Sandro Linux in Download speed hell   
    Ok 
  19. Like
    ddennis002 reacted to Kramer612 in Upload speed issues   
    Okay so as crazy as it sounds, high speed WiFi is kinda new to me so bear with me here. My roommate and I have the exact same PCIe WiFi card as we unfortunately cannot use ethernet connections at our new house 😞 . Specifically its the TP-Link AX3000 (Archer TX50E). Our ISP is AT&T, and we are signed up for the 1,000 plan. Our connection is a symmetrical fiber optic connection, so our download and upload speeds should be roughly the same from what I understand. I am getting about around about 600-700 down (not the full speed but its WiFi so I obviously expected that), and about 500-600 up. This is completely acceptable for me. However, my roommate is getting around 400-600 down, and about 10-20 up. On his end its acting like a cable connection rather than a fiber connection. Again, we have the exact same card.
     
    Here is his speedtest: 
     
     
    And here is mine:

     
    He has contacted TP Link about this and we have been through the ringer trying their troubleshooting. I had myself convinced he got a faulty card, but then we decided to switch them out and see if my PC suffered the same upload. To our surprise, it didn't. Which would lead me to believe that its something to do with his PC that's causing the slow upload, but I cannot for the life of me figure out what it might be. His motherboard is the B450-F Asus ROG, which has gigabit LAN, but I didn't even think a mobo would even matter here as it's a WiFi connection. We disabled his firewall already, and that boosted the speed, but only by about 2-5 mbps. I can provide any additional information as needed. Before anyone asks, yes the drivers are up to date, and I have uninstalled them and re-installed them several times at this point. We have also tried resetting our internet connection several times.  
     
     
  20. Like
    ddennis002 reacted to mumojala55 in ram speed   
    Solved the problem by putting the sticks on slots 2 and 4 , thanks for the help !
  21. Like
    ddennis002 got a reaction from Trentonxx in Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***   
    @Dean.P.  @Zelenia @Kenpachi1985 @MrBill01 @darkknight302 @Livin @DonGuano @GreyestGoat @ry_ry @super_teabag @FraktalU @vf1000ride @Kira0666 @Trentonxx @agent_x007 @X-System @soldier_ph  @Real_PhillBert 
     
    I have updated the Superpostion Scoreboard. 
    I do not have access to the Valley Benchmark unfortunately. 
  22. Like
    ddennis002 got a reaction from agent_x007 in Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***   
    @Dean.P.  @Zelenia @Kenpachi1985 @MrBill01 @darkknight302 @Livin @DonGuano @GreyestGoat @ry_ry @super_teabag @FraktalU @vf1000ride @Kira0666 @Trentonxx @agent_x007 @X-System @soldier_ph  @Real_PhillBert 
     
    I have updated the Superpostion Scoreboard. 
    I do not have access to the Valley Benchmark unfortunately. 
  23. Informative
    ddennis002 got a reaction from dtgq in How are two 8 pins enough for a RTX 3080?   
    150W for an 8 pin PCI-E is an artificial limit. 8 pins can carry a maximum of 288W and 6 pin can deliver 216W max.
  24. Like
    ddennis002 got a reaction from soldier_ph in Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***   
    @Dean.P.  @Zelenia @Kenpachi1985 @MrBill01 @darkknight302 @Livin @DonGuano @GreyestGoat @ry_ry @super_teabag @FraktalU @vf1000ride @Kira0666 @Trentonxx @agent_x007 @X-System @soldier_ph  @Real_PhillBert 
     
    I have updated the Superpostion Scoreboard. 
    I do not have access to the Valley Benchmark unfortunately. 
  25. Like
    ddennis002 got a reaction from Real_PhillBert in Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***   
    @Dean.P.  @Zelenia @Kenpachi1985 @MrBill01 @darkknight302 @Livin @DonGuano @GreyestGoat @ry_ry @super_teabag @FraktalU @vf1000ride @Kira0666 @Trentonxx @agent_x007 @X-System @soldier_ph  @Real_PhillBert 
     
    I have updated the Superpostion Scoreboard. 
    I do not have access to the Valley Benchmark unfortunately. 
×