DeskRabbit

This is a good idea, I may use this in the future if I can't 3D print them. For my current build I am using a dremmel on a sheet of aluminum haha. Thanks!

Is there a template for this available somewhere or are you suggesting making it in cad manually/with 3D scanners? Thanks

I have these legacy builds I do for old machines at work. The onboard IO is basically non existent you have to use headers on the board for ethernet,com,parallel,USB,ps/2mouse etc..thats on these boards I commonly use but, they have custom cut outs on cases or fit io shields so I've always made it work. Not going to work on any modern cases without fabrication or modification. Is there a cheap or good way to have custom io sheilds made with small lead time?

Thanks guys I'm not a pro at soldering but, I think I'm going to order some replacements and try replacing it.

I have a motherboard that will not boot due to a dead cmos due to it not holding any bios settings as a result. Unfortunately it is not a cr2032 it's an old lithium block battery that appears to be directly soldered to the motherboard. Anyone have any ideas to work around this without having to solder the battery/motherboard? I am going to leave it on over lunch to see if it will charge up/hold a charge. You can see the CMOS battery in the second picture.

Not sure I can do a traditional profile rebuild because that is typically done in a corporate setting in the personal setting there is no GUID or ProfileGUID folder in the registry.

probably going to take all night to backup my C drive so I will give that a try tomorrow probably. Thanks.

Maybe I can do a typical windows profile rebuild? such as is explained here https://community.spiceworks.com/how_to/121165-re-create-user-profile-windows the only thing not typical about it is I would be doing it from my laptop not my PC like you normally would.

I was able to load the hive and find my profile in the registry from my gaming PC using my laptop but, there is not a profile duplicate with .bak at the end like I am seeing is normally the issue with the original error message "user profile service service failed the logon" So I am kind of stuck now not really sure what else I could try with adjusting the user profile, if anyone knows please help. I can't use the PC at all and planning on backing up the files from it to my external hard drive so not too worried about messing up the profile/windows install worse, if I do I will just reimage.

I found a post on how to do that here: https://www.techwalla.com/articles/how-to-edit-the-registry-on-a-secondary-drive going to give that a try.

If I plug in the drive to my laptop with an external driver read/writer would I be able to edit the registry on it that way?

Yeah I was hoping to do that in safe mode but, can't seem to get past the login screen. That is the only profile I had created unfortunately .

Don't really have any backups unfortunately. Do you mean just run a system check from bios or physically check the hardware?

Hello All, I booted up my gaming/streaming PC like I do every morning when starting work from home and received and error message at my login screen "user profile service service failed the logon The user profile cannot be loaded". I am not sure whether this was a random occurrence or if my "friend" may have deleted my profile from my registry while I left my PC unlocked and unattended. Though, I did also receive a BSOD a few days ago and in computer management windows log files it showed as a system bugcheck. I ignored it unfortunately and only had the one profile on my system. I have attached some pictures of what my login screen looks like currently and the error message I got when trying to do a system restore to the only restore point I had available while in safe mode. I have tried all the troubleshooting I can think of and will probably need to reimage. Troubleshooting: I have been getting to the Windows recovery and troubleshooting options by holding shift when restarting from my broken login screen -trying the continue and exit to Windows Recovery option just loops back to the broken login screen -trying the use another operating system and selecting Windows Recover also goes back to the broken login screen -trying the "reset this PC" option and selecting keep my files failed with an error message and said that no changes were made -trying to system restore gave the error message attached in advanced options -trying start up repair was not able to resolve the problem -trying to uninstall updates both feature and quality seemed to run successfully but looped back to broken login again -trying to use "startup settings" to change to safe boot mode just restarted and went to the broken login screen didn't give me any options - trying to use Command Prompt opened CMD window and I ran "bcdedit /set {default} safeboot minimal" ran successfully - still just rebooted back to login after closing cmd window. Anyone have any suggestions before I try to save what I can from the Drive then reimage? Thanks! DeskRabbit

WOW -Owen Wilson I was able to get into the bios reinstall/flash BIOS version F22 from flash drive. Then boot into windows on restart. I have never been so happy to see windows. lol Thanks for the assistance and chat! I am so happy