Jump to content

Sajeev

Member
  • Posts

    61
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Sajeev got a reaction from Zando_ in I9 9900K Cinebench R20 issue   
    Radeon VII is performing like a charm, has an excellent performance, my friend has a 2080 and it beats it I some games, though temps are a case for this card though, I have undervalued mine to 1.08 (stock was about 1.138 V) to run at 1930MHz with a 1175MHz on Ram, I did a small adjustment on the fan curve to make it run at higher rpm's on temps over 50 degrees, it is working like a charm. I have not tried going above 1930 or 1175 in both cases as it is getting the job done for me. I am waiting for the water block from EK or Alphacool to come out to completely remove the fan noise and push it a little bit higher as it would run lot cooler with custom water looping. I did have some reservation while buying this card but I am happy I bought it. My seller has told me that running this card on a an AMD chipset makes this card perform better(strange).. Waiting for the water block and then will try and see how it performs on an all AMD system.
     
    Do let me know how yours perform after all the tweaking. 
     
     
    Rgds
    Sajeev
  2. Like
    Sajeev got a reaction from Zando_ in I9 9900K Cinebench R20 issue   
    Tks guys, all problems solved just by pointing a fan towards the VRM's. Temps now pretty neat, Ran Aida64, Prime 95 for over an hour and  and OCCT for over 4 hours and found out that temps were extremely stable on both VRM's (40-45) and CPU Core (65-75). So happy now, couldn't have done it without your support and advises. Tks again a ton. You guys rock.. Getting a Thermaltake View 71 case for this build, and yes I am going to swipe the Graphic card for 2 2080Ti's FE on Custom water loop from my threadripper 2950X build which I have running on stock. I'll put my Radeon VII in threadripper build. Some pics from my last build attached here.
     
    @tarfeef101 @Zando Bob @GMart84 @alatron978 @Falkentyne
     
    Rgds
    Sajeev


  3. Like
    Sajeev got a reaction from GMart84 in I9 9900K Cinebench R20 issue   
    Guys Finally Finally Finally I got Realbench running too and finish successfully with the report saying EVERYTHING IS OK (though it shows failed to parse the results).Actually the only thing that I changed was Max CPU capability to Auto from 140% that I was running previously and didn't disable the Intel Speed Shift Technology (and yes I have not changed my CPU Core/Cache Voltage, it is still 1.29 with an AVX offset of 2, Ram voltage is 1.35 set by Auto), both VCCIO and VCCSA are at 1.2500 V (by default), that's it everything as of now running fine. Passed R20 Cinebench and intel Burn Test. I am going to run OCCT stress test for about good 7-8 hours to check if the system is stable, any temperature issue, etc etc.. If everything is fine I will post all my settings here for you guys.
     
    @GMart84 @tarfeef101 @Zando Bob @Falkentyne 
     
    Once again I would like to thank each one of you who helped me with this issue . Tks Guys, Tks a Ton
     
    Best Rgds
    Sajeev
  4. Like
    Sajeev got a reaction from Zando_ in I9 9900K Cinebench R20 issue   
    Guys Finally Finally Finally I got Realbench running too and finish successfully with the report saying EVERYTHING IS OK (though it shows failed to parse the results).Actually the only thing that I changed was Max CPU capability to Auto from 140% that I was running previously and didn't disable the Intel Speed Shift Technology (and yes I have not changed my CPU Core/Cache Voltage, it is still 1.29 with an AVX offset of 2, Ram voltage is 1.35 set by Auto), both VCCIO and VCCSA are at 1.2500 V (by default), that's it everything as of now running fine. Passed R20 Cinebench and intel Burn Test. I am going to run OCCT stress test for about good 7-8 hours to check if the system is stable, any temperature issue, etc etc.. If everything is fine I will post all my settings here for you guys.
     
    @GMart84 @tarfeef101 @Zando Bob @Falkentyne 
     
    Once again I would like to thank each one of you who helped me with this issue . Tks Guys, Tks a Ton
     
    Best Rgds
    Sajeev
  5. Like
    Sajeev got a reaction from tarfeef101 in I9 9900K Cinebench R20 issue   
    I set the offset to 1 and now it's working fine, got the R20 to run flawlessly a couple of times without any hiccups. Been running the OOCT stress test for about 18 minutes now, plan to run it for about an hour and see the results. Temps seem to be varying quite a bit mostly between 70-80, with once in a while hitting 86 on one core.
     
    You guys have been great, thank you so much...
     
    Cheers
    Sajeev

  6. Agree
    Sajeev got a reaction from Zando_ in Overclocking Radeon VII   
    Let's hope that's the case.
  7. Like
    Sajeev got a reaction from TVwazhere in Choosing the correct case   
    @andrewmp6 @TVwazhere  Tks guys. I finally have settled on TT View 71. Should be delivered to me in the next couple of days.
     
     
    Best Regads
    Sajeev
  8. Like
    Sajeev got a reaction from TVwazhere in Choosing the correct case   
    Sorry typo error, I meant 420MM???
×