Hey guys,I built a new pc today, managed to turn it up using the front panel swith, donwloaded drivers and everything was normal until I decided to go to bios again to set up a couple more stuff ( Turned on password power on, Mouse double click power on and 4 seconds holding the power button to shut it down) and then saved and exit. It turned off, but I cant power up again. I tried absolutely everything, reattached all the cables, repasted de cooler and re set every component, but not one light came up during the process. I have tested my psu with the paper clip, worked fine. But still coudn't make it turn on again.Here are the specs:Gigabyte z390 UDI5 9600kEvga rtx 2070G skill rgb 2x8 ddr4 3000 ocPsu corsair cx650mCase nzxt h5001 tb ssd samsung evo 860Noctua nh-15dWhat I did:-Reattached all cables 3 times-Checked pins if were damaged(were not)-re set ram and cooler-rechecked the power switch- tried reset by cmus by shorting with a screwdriver- removed the battery for 3 minutos to force reset cmus-removed the rtx 2070 and started testing without it-searched for damage on the mobo, did not findWhat I noticed:-After the bios save, my mouse rbg kept turned on after shutting the pc down, but I coudn`t turn the pc on- My motherboard uses a 24 pin for powering it and a 8pin+4pin for the cpu, I'm only using 8pin, becsuse my psu does not have one more 4pin available, but it worked perfectly on the first boot.
-Before entering the bios I had a blue screen witha boot error of some sort, but I can`t recall it.Please, help me... I just spent everything I had to build this one...