Jump to content

Faisal A

Member
 View Profile  See their activity

  • Posts

    880

  • Joined

  • Last visited

 Content Type 

Everything posted by Faisal A

  1. Faisal A
    It is OK. I do it all the time. I have figured that when you turn it off, all it does is unpower the RAM and reloads the data from the HDD/SSD
  2. Faisal A
    Swap the SSD for a reputable one. Never heard of that brand before
  3. Faisal A
    You have created 2 partitions in 1 drive
  4. Faisal A
    Cant beat my whopping 92,839 hours runtime. It was in a server so only 200 power cycles.
  5. Faisal A
    In my area, static IPs are only available under the buisness line. If you can set a static IP, do it through the router
  6. Faisal A
    Which motherboard do you have
  7. Faisal A
    Did you create is as MBR or GPT ?
  8. Faisal A
    You can put it at the bottom of the caes. Is there any cab;e management space in your case. If not you might want to zip tie some wires together to make it a bit neater
  9. Faisal A
    @Tan3l6 I did that but it came up with "electronics" which is the most useless search result it could have come up with
  10. Faisal A
    @Tan3l6 Thank you so much. I have been searching for hours
  11. Faisal A
  12. Faisal A
    @Nibbzey Can you see the screws on this outlet Use a wire to touch the screw to the metal of the case (do not plug into the pins. Touch the screw with a wire as it is grounded)
  13. Faisal A
    @Bananasplit_00
  14. Faisal A
    The hard ware is not overclocked but the point is that the PSU could not handle the power draw. Download AIDIA64 trial and stress your GPU and |CPU and see what happens to the voltage. Anything under 8V is considered a fail for me (on the 12V rail)
  15. Faisal A
    @MadmanRB My PC kept freezing and had to be restarted when overlcocked so I attatched my multimeter to the power rails and investigated the issue. Turned out to be the PSU
  16. Faisal A
    @MadmanRB Just because it is a tear old doesn't mean it can't be faulty. It can be faulty straight out of the box or develop a problem later. It might not have enough power capacity, or the voltage may be significantly lowering under load. In my instance, the 12V rail was lowering to 6V
  17. Faisal A
    I don't think the mobo is bad. It is probably an outdated BIOS. Try updating it
  18. Faisal A
    Try using a different PSU. That seemed to be the issue with me
  19. Faisal A
    This seems like a static/ground interference issue. Try to ground your headphone jack externally if you are experienced with electronics
  20. Faisal A
    Yes it is a good combo, but if AMD creates a new socket, the X570 won't handle ryzen 4 and 5
  21. Faisal A
    Get the crucial mx series insread
  22. Faisal A
  23. Faisal A
    @leadeater Thats another £400 and I already hhave the dl350
  24. Faisal A
    @RollinLower Guess ill go with that then. It is going to be sticking out about 35cm thaugh
  25. Faisal A
    @leadeater The server only cost £300
×