Jump to content

Faisal A

Member
  • Posts

    880
  • Joined

  • Last visited

Everything posted by Faisal A

  1. Should be fine. Some peak higher then that and it is good for average
  2. Are you using a cat5 cable. Try using a newer one, but if its been working fine before that might not be the issue
  3. In that case it is an inaccurate reading or opening steam is an intensive task. Download AIDIA64 trial and stress test your CPU. If temps stay under 90C, you should be fine
  4. You don't need to disbale the sata ports. You just need to change the boot priotrity to your SSD
  5. Try leaving the door open and playing. Also, use multiple speed test. Do not rely on one website for accurate readings. use speedof.me and googles speed test aswell
  6. @Thanatopsis I have found this camera. Should i save up for it
  7. Are there any closed doors ? Is there any funiture in the way. Did you change the location of the adapters ? Is the main router ethernet slow ?
  8. What core voltage have you got. Have you removed the plastic protector. How much pressure is being applied. Are you using nockoff thermal paste? You might need a bit more then a grain of rice, bu not too much
  9. Are there any new obstructions ? Adapters don't need to be reset althaugh it could be a hardware issue in the adapter
  10. It it has a cool touch it could a a inaccurate reading. The core temp is always higher then the heatsink temps though. What is your core voltage and what speeds are you running at. What cooler do you hav
  11. @Thanatopsis I think I will buy the seond mic you mentioned. As for a camera, I want one where I can plug the mic into it. Is this mic also fine
  12. I think your CPU wil be bottlenecked. 8GB of RAM is currently fine or just get 1 16GB stick for now and use the money to upgrade your CPU
  13. @Ezzy-525 I have a sony cybershoot from 2012 currently and a looking for an upgarde around max £50. Can you give a link to a good webcam ?
  14. Voltage fluctuation is normal and the fluctuation reduces as the quality and price of the PSU go higher
  15. @Thanatopsis I need 1 mic to clip on a t shirt and another one for far away sounds like machinery. Also, I need a camera for around £40. I have a sony cybershoot right now
  16. @Den-Fi Oh. Which one should I get then. I don't mind something heavily used.
  17. I can't run a VM smooth on an AMD A6-7300. Don't think it will be anywhere near smooth on a Pi4
  18. Its OK but you might not be able to play at high settings. It has an AMD A10 CPU which will be like a R3 1700X
  19. I have a youtube channel and am looking for a camera upgrade. Is this one any good ? Should i get something else. Budget is around £40-45. Also, what would be a good mic and can i plug one into this camera ?
  20. @Zodiark1593 @Thanatopsis @Fasauceome Is this camera any good ? And what mic should I get
  21. Try clearing the CMOS and resetting the BIOS. Also try disableing XMP
  22. Has your setup worked before. What CPU and motherboard are you using. Try resetting the BIOS settings and or clearing the CMOS. If your CPU has iGPU, you can use that for the second display.
×