Jump to content

AaronH1212

Member
  • Posts

    23
  • Joined

  • Last visited

Everything posted by AaronH1212

  1. Since plays.tv have shut down is there a way to set shadow play up to auto-record gameplay and then stop once that game has been closed? Or set it to like auto record certain applications? I'm not too worried about auto-deleting as Ive got loads of space for recording and can just delete then but Id rather not have to record everything manually etc so wondering if there are any solutions.
  2. might seem stupid question but with the EK block do i leave the current backplate on? and this just goes on the front? edit: also will most res' fit? the holes in the case?
  3. So Ive been running a nzxt kraken for some bit for my cpu and just had fans for the gpu but im planning on upgrading to a full water cooled loop however ive no clue about compatabilitly so im not sure what specific parts i should be getting especially for my graphics card as its not a founders card so here are parts list Graphics Card : Gigabyte RTX 2070 OC CPU : I7 9700k Mother board : Z390 Aorus Pro Case : Phanteks Enthoo Pro M Tower 280mm Radiator can fit on top and i believe a 360mm Radiator can fit in the front if remove some case parts edit: Budget Isnt Huge. Recommend Parts that you get what you pay for, so decent parts that dont break the bank but arnt horrible x
  4. Fix : slot was disabled when m.2 drive is installed so moved cable to different slot and reset PC now working perfectly
  5. Just Tried This and no luck still not being detected
  6. although their are 2 slots on the motherboard for a m.2 drive only one of which is the correct size , and ive tried re plugging in the sata ports with the SSD but i haven't tried switching them i will try that now.
  7. Aorus Z390 Pro , the bios detects the drive when the M.2 is took out though and not even windows detects the drive when the M.2 in installed
  8. so i recently got a new M.2 second hand , was working perfectly but it was the only drive in the system it came from , so it had windows etc already on it . so when i put it into my PC it booted onto the M.2 rather than my main boot drive but when i went into the bios my main boot drive was no where to be found so i could not boot into my main OS. My main OS is on a Samsung 860 EVO SSD and is working 100 percent fine and works like normal and is detected without the M.2 drive installed, but as soon as the M.2 drive gets installed the drive seems to disappear from existence. So due to this the only OS i can get onto with the m.2 installed is the version that is on the m.2 SSD which means i cannot format the drive so that there is no versions of windows on it and since i can get into my own main OS i cannot format it that way as well. my PC is the only thing i have as well that supports a m.2 SSD so its the only way i have to find a way to wipe it. Any suggest on how to get the drive wiped? or even better just get my Main OS drive detected whenever the M.2 is installed as I've no clue and don't have an extreme knowledge of this sort of thing. thanks
  9. I fixed it , my razor Goliath chroma when the pc is shut down it still flickers white really dimly and it was stoping motherboard lights going off , so I unplugged it restarted pc and lights going off now thanks
  10. Built this PC yesterday first time building one. Specs: I7 9700k | RTX 2070 | Kraken x62 | 16gb Trident Z 3200 | G3 750W | 500GB Samsung 860 evo + 2tb misc storage | enthoo pro m | Gigabyte z390 Pro (p.s I know cable management could be abit better but I just wanted to get it built and use it :P)
  11. No but it’s not status light that are on it’s all the MB RGB lights
  12. It’s a-gigabyte z390 pro , and yes switching of the psu will work but I don’t want to do that everytime I shut down the pc
  13. So I recently built a new pc the motherboard is a z390 when I first built it shut it down ect all the lights turned off but tonight when I turned it off the motherboard lights remained on which is a big problem for me since I can’t sleep with light. Any Help Would Be Apreciated EDIT : FIX My razor Goliath chroma when the pc is shut down it still flickers white really dimly and it was stoping motherboard lights going off , so I unplugged it restarted pc and lights going off now
  14. So I recently sold an Alienware Aurora r3, but it has been returned to me since due to it not booting and giving me CRITICAL_SERVICE_FAILED, it runs through collecting error info and gets to about 60% and just freezes, which means I can't get to the windows repair options. I have no idea how to fix it, I can get into the bios at that's about it. PLEASE HELP!
  15. Is this layout any better? https://gyazo.com/0794f3f2fb113cd5880bfea24893691d
  16. I would like a bit more than 500w for future upgrading and some slight of. I could go with the g2 but I would rather save the 20 pound difference if I can
  17. Some of the psus you mentioned I cannot find in Ireland. and the rxm is 50 pound (65dollars) more expensive edit: only rxm and txm are available here.
  18. Personally not a fan of a fan, they look kinda bulky. I like the look of the g3 cables and the price is decent and I shouldn't be drawing enough power in this build to have to worry about otp and opp?
  19. it won't let me change the text format as they were copy and pasted, also I bought a 500gb and then was given a 250gb SSD, also which one of those power supplies you mention would be the cheapest or best value for what you get?
  20. Hi I'm building a new pc and would like your opinions on the specs as it is my first time building a pc Here is parts list I7 9700k Nvidia GTX 1070 TI Gigabyte aorus z390 pro Corsair vengeance RGB (2x8gb) Phanteks Enthoo Pro M Kraken X62 Samsung 860 evo 500gb ssd Samsung 860 evo 250gb ssd 2T Hard drive seagate EVGA SuperNOVA 650 G3, 80 Plus Gold 650W
  21. In my opinion, upgrade the ram to 8gb and just save rest of the money for a new computer. And if you really want to spend money on upgrading maybe add an SSD and stick windows and your main games on it
  22. I'm currently building a pc with an i7 9700k and a gtx 1070ti. Im also using a enthoo pro m case and was wondering if there any good fan layouts, this is the layout I'm going with at the minute https://gyazo.com/292b66da7ddcb5178aba34ad52115f42
×