Jump to content

Stormseeker9

Member
  • Posts

    4,707
  • Joined

  • Last visited

Everything posted by Stormseeker9

  1. you could try set at 3000mhz, and then up the voltage by 0.1V Over the volt spec on the stick.
  2. Come back here two to three weeks before you are actually going to be purchasing all the components. Things change at a rapid pace, including pricing. (I mean this in a nice way, not a dick way). merry Christmas
  3. Running 4 sticks at 3200 (I assume) can be problematic with a ryzen cpu from that gen and previous. I run a 2700x and had difficulties running xmp @3200mhz once I had four sticks. What fixed it for me is enable xmp but manually put the voltage higher and that fixed it for me. I am not sure if this is the same case with a thread ripper though so hope it works
  4. Are you using chatGPT instructions as your answers here on the forum? lol
  5. No idea. You are using a proprietary board. You DIY’d the cabling.
  6. Have you tried plugging all the front I/o cables in in the board and using the case on/off button? as @vertigo220pointed out, the ‘reset’ switch won’t do anything if the system is not powered on.
  7. I commend you. But it could lead to a fire hazard, altering cabling of a psu. Also, that seems to be a low grade PSU in general. as for your ‘issue’. Why not use the off/on switch on the backside of your PSU? Just flick it off and that way no power goes to the PC anymore.
  8. Nothing necessarily to do with LTT directly. Any product from any country outside of EU or Schengen gets hit with additional levies and taxes
  9. Wait till they hit you with import duties, and additional vat and other costs lol it may be that because of the value you are lucky and only have a minor charge by the post office, but I’ve seen people having to pay sometimes the same or more in duties taxes and fees than the product (with the LTT backpack this has been the case) here in the EU. $20 shipping is not a lot for US to EU.
  10. What is your exact chip? what mhz ram?
  11. I’m sure you are actually able to do that too, there should be a ‘customise’ option somewhere in that menu if I remember correctly!
  12. Ensure that your screen is running 120hz, not 60hz (windows standard). link to steps
  13. Well, it literally does what you want it do to do, except it is not a terminal command
  14. You should be able to setup the DND that it actives automatically when certain programs are run. When I game my PC switches to DnD automatically (it’s under that windows+N menu). hope you can get it sorted
  15. Don’t think that is possible. just use windows key + N and you can enable, disable, or setup the ‘focus’ mode as you want. Including when on or when off.
  16. So you have two CPU’s? have you tried both on your a320 board? I would suggest to see if you can find a B450 or B550 board and test it. If still high temps, the cpu is shot. RMA for a new one. although I think a320 is just to weak for such. ‘High performance’ chip.
  17. Well spotted. That motherboard may be a bit on the weak side for that chip.
  18. The software you mention for anti cheat, when you don’t run this software, does your PC function normally?
  19. @aledsav1 have you checked for good contact between your IHS & cooler? Enough thermal paste? have you applied any OC?
  20. If your main priority is to watch Netflix/videos, you could also look into a tablet device. It is likely that these will not run the games you mentioned, but depending what tablet, you could use their store for ‘mini games’. A Chromebook would also fit in your budget, and could be an ideal solution if budget + watching videos are the most important two things
  21. Forgot to put that in my previous comment. Is windows installed? Haha good you figured it out
×